[PATCH 1/3] DT Binding for omap3 temperature sensor

Pavel Machek pavel at ucw.cz
Fri Dec 26 09:19:44 PST 2014


On Fri 2014-12-26 13:34:52, Sebastian Reichel wrote:
> OMAP34xx and OMAP36xx processors contain a register in the syscon area,
> which can be used to determine the SoCs temperature. This provides a
> DT binding specification for the temperature monitor.
> 
> Signed-off-by: Sebastian Reichel <sre at kernel.org>
> ---
>  .../bindings/hwmon/omap3-temperature.txt           | 25 ++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/omap3-temperature.txt
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/omap3-temperature.txt b/Documentation/devicetree/bindings/hwmon/omap3-temperature.txt
> new file mode 100644
> index 0000000..99631ad
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/omap3-temperature.txt
> @@ -0,0 +1,25 @@
> +* OMAP3 temperature sensor
> +
> +The OMAP34xx and OMAP36xx processors contain a register in the syscon area,
> +which can be used to determine the SoCs temperature.
> +
> +Requires node properties:
> +- compatible :	should contain one of
> +	- "ti,omap34xx-temperature-sensor" for OMAP34xx
> +	- "ti,omap36xx-temperature-sensor" for OMAP36xx
> +- syscon :	Should be a phandle to system configuration node which
> +		encompases the temperature register
> +- clocks :	Should contain 32KHz fclk clock specifier
> +- clock-names :	Should contain clock names
> +	- "fck" for the 32KHz fclk clock specifier

I don't quite get it. The temperature sensor is internal on the CPU,
right? Why do we need device tree to describe it? As soon as we have
CPU that is compatible to ti,omap3430, we know everything we need to
know, no?

> +Example for omap34xx:
> +
> +/ {
> +	temperature-sensor {
> +		compatible = "ti,omap34xx-temperature-sensor";
> +		syscon = <&omap3_scm_general>;
> +		clocks = <&ts_fck>;
> +		clock-names = "fck";
> +	};
> +};

Or is there something that depends on the board there? Or do we want
to do it like this to be consistent with existing bindings?

									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html



More information about the linux-arm-kernel mailing list