[PATCH RFC v3 15/18] ARM: dts: imx6qdl-sabresd: Add support for TRULY TFT480800-16-E MIPI DSI panel

Liu Ying Ying.Liu at freescale.com
Mon Dec 22 19:46:36 PST 2014


The TRULY TFT480800-16-E panel is driven by the Himax HX8369A driver IC.
The driver IC supports several display/control interface modes, including
the MIPI DSI video mode and command mode.

Signed-off-by: Liu Ying <Ying.Liu at freescale.com>
---
v2->v3:
 * None.

v1->v2:
 * To address Thierry Reding's comments, remove several unnecessary
   properties as they can be implied by the compatible string.
 * Fix the compatible string.
 * Remove the display-timings node from the panel node as it can be
   implied by the compatible string as well.
 * Remove the status property as it is unneeded.

 arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index baf2f00..658bde9 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -482,6 +482,13 @@
 				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
 			>;
 		};
+
+		pinctrl_mipi_panel: mipipanelgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0
+				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0
+			>;
+		};
 	};
 
 	gpio_leds {
@@ -518,6 +525,19 @@
 	};
 };
 
+&mipi_dsi {
+	status = "okay";
+
+	panel {
+		compatible = "truly,tft480800-16-e-dsi";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mipi_panel>;
+		reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+		bs2-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-- 
2.1.0




More information about the linux-arm-kernel mailing list