[PATCH v2 2/3] mmc: dw_mmc: Use mmc_regulator_set_vqmmc in start_signal_voltage_switch

Doug Anderson dianders at chromium.org
Mon Dec 15 15:25:28 PST 2014


We've introduced a new helper in the MMC core:
mmc_regulator_set_vqmmc().  Let's use this in dw_mmc.  Using this new
helper has some advantages:

1. We get the mmc_regulator_set_vqmmc() behavior of trying to match
   VQMMC and VMMC when the signal voltage is 3.3V.  This ensures max
   compatibility.

2. We get rid of a few more warnings when probing unsupported
   voltages.

3. We get rid of some non-dw_mmc specific code in dw_mmc.

Signed-off-by: Doug Anderson <dianders at chromium.org>
---
Changes in v2: None

 drivers/mmc/host/dw_mmc.c | 17 +----------------
 1 file changed, 1 insertion(+), 16 deletions(-)

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 67c0451..4ae800c 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1160,8 +1160,6 @@ static int dw_mci_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
 	struct dw_mci *host = slot->host;
 	u32 uhs;
 	u32 v18 = SDMMC_UHS_18V << slot->id;
-	int min_uv, max_uv;
-	int ret;
 
 	/*
 	 * Program the voltage.  Note that some instances of dw_mmc may use
@@ -1170,24 +1168,11 @@ static int dw_mci_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
 	 */
 	uhs = mci_readl(host, UHS_REG);
 	if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
-		min_uv = 2700000;
-		max_uv = 3600000;
 		uhs &= ~v18;
 	} else {
-		min_uv = 1700000;
-		max_uv = 1950000;
 		uhs |= v18;
 	}
-	if (!IS_ERR(mmc->supply.vqmmc)) {
-		ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv);
-
-		if (ret) {
-			dev_dbg(&mmc->class_dev,
-					 "Regulator set error %d: %d - %d\n",
-					 ret, min_uv, max_uv);
-			return ret;
-		}
-	}
+	mmc_regulator_set_vqmmc(mmc, ios);
 	mci_writel(host, UHS_REG, uhs);
 
 	return 0;
-- 
2.2.0.rc0.207.ga3a616c




More information about the linux-arm-kernel mailing list