[PATCH] ARM: dts: imx51-babbage: Fix hang on USB probe

[Fabio Estevam]

Currently the following hang is observed during USB probe:

[    1.243660] usbcore: registered new interface driver usb-storage
[    1.261619] ci_hdrc ci_hdrc.1: doesn't support gadget
[    1.266730] ci_hdrc ci_hdrc.1: EHCI Host Controller
[    1.272058] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
[    1.290639] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[    1.301162] hub 1-0:1.0: USB hub found
[    1.305248] hub 1-0:1.0: 1 port detected
(hangs here...)

Pass the 'regulator-always-on' to make sure that the USB PHY and USB hub are
properly powered.

Cc: <stable at vger.kernel.org> # 3.16
Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 arch/arm/boot/dts/imx51-babbage.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 56569ce..65d3d97 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -137,6 +137,7 @@
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
+			regulator-always-on;
 		};
 
 		reg_usbotg_vbus: regulator at 1 {
@@ -149,6 +150,7 @@
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
+			regulator-always-on;
 		};
 	};
 
-- 
1.9.1