[PATCH] arm64: psci: Fix build breakage without PM_SLEEP

Lorenzo Pieralisi lorenzo.pieralisi at arm.com
Fri Dec 12 07:06:08 PST 2014


On Tue, Dec 09, 2014 at 04:15:11PM +0000, Catalin Marinas wrote:
> On Tue, Dec 09, 2014 at 12:38:09PM +0000, Krzysztof Kozlowski wrote:
> > On wto, 2014-12-09 at 13:29 +0100, Arnd Bergmann wrote:
> > > On Tuesday 09 December 2014 12:48:36 Krzysztof Kozlowski wrote:
> > > > Fix build failure of defconfig when PM_SLEEP is disabled (e.g. by
> > > > disabling SUSPEND) and CPU_IDLE enabled:
> > > > 
> > > > arch/arm64/kernel/psci.c:543:2: error: unknown field 'cpu_suspend' specified in initializer
> > > >   .cpu_suspend = cpu_psci_cpu_suspend,
> > > >   ^
> > > > arch/arm64/kernel/psci.c:543:2: warning: initialization from incompatible pointer type [enabled by default]
> > > > arch/arm64/kernel/psci.c:543:2: warning: (near initialization for 'cpu_psci_ops.cpu_prepare') [enabled by default]
> > > > make[1]: *** [arch/arm64/kernel/psci.o] Error 1
> > > > 
> > > > The cpu_operations.cpu_suspend field exists only if ARM64_CPU_SUSPEND is
> > > > defined, not CPU_IDLE.
> > > > 
> > > > Signed-off-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
> > > > 
> > > 
> > > No objection to fixing this obvious build bug, but why do we even have
> > > an ARM64_CPU_SUSPEND option? On ARM32 we only have the respective option
> > > because we have a random collection of platform specific drivers that
> > > use the symbols, but that's not the case on ARM64.
> > 
> > I believe because of cpuidle. It's the same as on ARM32: the cpu_suspend
> > is used by both PM_SLEEP and CPU_IDLE.
> 
> I guess at some point we can replace (as a separate patch)
> ARM64_CPU_SUSPEND with PM_SLEEP.
> 
> But what I don't fully understand, we can enable CPU_IDLE without
> ARM64_CPU_SUSPEND. However, the cpuidle-arm64.c driver will fail to
> link since it calls cpu_suspend(). Wouldn't it be better if
> ARM64_CPU_SUSPEND depends on CPU_PM (or replaced by it) rather than
> PM_SLEEP?

I think that ARM64_CPU_SUSPEND should depend on PM_SLEEP || CPU_IDLE,
if CPU_IDLE is enabled it is certainly because some idle states are
expected to be present, true, not all of them lose context (which is
why ARM64_CPU_SUSPEND is needed, to save/restore context and clean
it to RAM), but I think that's too fine grain, making it depend on
CPU_IDLE should be ok.

Having CPU_IDLE enabled without arm64 cpuidle driver enabled (which
selects ARM64_CPU_SUSPEND) is useless at the moment.

As to cpu_ops, I think that the suspend hook should ifdef on CPU_IDLE,
but I have to wait and see how we implement S2R to make it a final
decision.

> Can we allow deeper idle states when CONFIG_SUSPEND is disabled? I see
> CONFIG_SUSPEND related to suspend-to-RAM (system standby) rather than
> CPU idle, in which case we may want to allow cpu_suspend when only
> CPU_IDLE is enabled (which implies CONFIG_CPU_PM).

Yes, deep idle states are enabled even when suspend is disabled, but
both S2R and CPU_IDLE should turn on ARM64_CPU_SUSPEND to save/restore
context, unless we remove ARM64_CPU_SUSPEND entirely and we always
compile that code in.

I will put together a patch first thing next week to clarify this
thread.

Thanks,
Lorenzo




More information about the linux-arm-kernel mailing list