[PATCH] ARM: dts: imx6qdl: Remove OCRAM clock from VPU node

[Fabio Estevam]

According to Documentation/devicetree/bindings/media/coda.txt:

- clock-names : Should be "ahb", "per"

The OCRAM clock is already provided inside the ocram node, so remove the OCRAM 
clock from the VPU node.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 arch/arm/boot/dts/imx6qdl.dtsi | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index f821999..2409d1f 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -339,9 +339,8 @@
 				             <0 3 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "bit", "jpeg";
 				clocks = <&clks IMX6QDL_CLK_VPU_AXI>,
-					 <&clks IMX6QDL_CLK_MMDC_CH0_AXI>,
-					 <&clks IMX6QDL_CLK_OCRAM>;
-				clock-names = "per", "ahb", "ocram";
+					 <&clks IMX6QDL_CLK_MMDC_CH0_AXI>;
+				clock-names = "per", "ahb";
 				resets = <&src 1>;
 				iram = <&ocram>;
 			};
-- 
1.9.1