[PATCH 08/19] clk: samsung: exynos5433: Add clocks for CMU_AUD domain

[Pankaj Dubey]

Hi Chanwoo,

On Tuesday 02 December 2014 02:19 PM, Chanwoo Choi wrote:
> This patch adds the mux/divider/gate clocks for CMU_AUD domain which
> includes the clocks of Cortex-A6/Bus/Audio clocks.

Cortex-A6? I think it should be Cortex-A5?

>
> Cc: Sylwester Nawrocki <s.nawrocki at samsung.com>
> Cc: Tomasz Figa <tomasz.figa at gmail.com>
> Signed-off-by: Chanwoo Choi <cw00.choi at samsung.com>
> Acked-by: Inki Dae <inki.dae at samsung.com>
> Acked-by: Geunsik Lim <geunsik.lim at samsung.com>
> ---
>   .../devicetree/bindings/clock/exynos5433-clock.txt |   7 +
>   drivers/clk/samsung/clk-exynos5433.c               | 173 +++++++++++++++++++++
>   include/dt-bindings/clock/exynos5433.h             |  53 +++++++
>   3 files changed, 233 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
> index 8d3dad4..9a6ae75 100644
> --- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
> @@ -23,6 +23,8 @@ Required Properties:
>       which generates clocks for G2D/MDMA IPs.
>     - "samsung,exynos5433-cmu-disp"  - clock controller compatible for CMU_DISP
>       which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs.
> +  - "samsung,exynos5433-cmu-aud"   - clock controller compatible for CMU_AUD
> +    which generates clocks for Cortex-A5/BUS/AUDIO clocks.

Commit message says Cortex-A6?

>
>   - reg: physical base address of the controller and length of memory mapped
>     region.
> @@ -86,6 +88,11 @@ Example 1: Examples of clock controller nodes are listed below.
>   		#clock-cells = <1>;
>   	};
>
> +	cmu_aud: clock-controller at 0x114c0000 {
> +		compatible = "samsung,exynos5433-cmu-aud";
> +		reg = <0x114c0000 0x0b04>;
> +		#clock-cells = <1>;
> +	};
>
>   Example 2: UART controller node that consumes the clock generated by the clock
>   	   controller.
> diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
> index ec23e97..99262e0 100644
> --- a/drivers/clk/samsung/clk-exynos5433.c
> +++ b/drivers/clk/samsung/clk-exynos5433.c
> @@ -2454,3 +2454,176 @@ static void __init exynos5433_cmu_disp_init(struct device_node *np)
>
>   CLK_OF_DECLARE(exynos5433_cmu_disp, "samsung,exynos5433-cmu-disp",
>   		exynos5433_cmu_disp_init);
> +
> +/*
> + * Register offset definitions for CMU_AUD
> + */
> +#define MUX_SEL_AUD0			0x0200
> +#define MUX_SEL_AUD1			0x0204
> +#define MUX_ENABLE_AUD0			0x0300
> +#define MUX_ENABLE_AUD1			0x0304
> +#define MUX_STAT_AUD0			0x0400
> +#define DIV_AUD0			0x0600
> +#define DIV_AUD1			0x0604
> +#define DIV_STAT_AUD0			0x0700
> +#define DIV_STAT_AUD1			0x0704
> +#define ENABLE_ACLK_AUD			0x0800
> +#define ENABLE_PCLK_AUD			0x0900
> +#define ENABLE_SCLK_AUD0		0x0a00
> +#define ENABLE_SCLK_AUD1		0x0a04
> +#define ENABLE_IP_AUD0			0x0b00
> +#define ENABLE_IP_AUD1			0x0b04
> +
> +static unsigned long aud_clk_regs[] __initdata = {
> +	MUX_SEL_AUD0,
> +	MUX_SEL_AUD1,
> +	MUX_ENABLE_AUD0,
> +	MUX_ENABLE_AUD1,
> +	MUX_STAT_AUD0,
> +	DIV_AUD0,
> +	DIV_AUD1,
> +	DIV_STAT_AUD0,
> +	DIV_STAT_AUD1,
> +	ENABLE_ACLK_AUD,
> +	ENABLE_PCLK_AUD,
> +	ENABLE_SCLK_AUD0,
> +	ENABLE_SCLK_AUD1,
> +	ENABLE_IP_AUD0,
> +	ENABLE_IP_AUD1,
> +};
> +
> +/* list of all parent clock list */
> +PNAME(mout_aud_pll_user_aud_p)	= { "fin_pll", "fout_aud_pll", };
> +PNAME(mout_sclk_aud_pcm_p)	= { "mout_aud_pll_user", "ioclk_audiocdclk0",};
> +PNAME(mout_sclk_aud_i2s_p)	= { "mout_aud_pll_user", "ioclk_audiocdclk0",};

Above two lines can be clubbed with some common name as both has same 
parent clocks.

> +
> +static struct samsung_fixed_rate_clock aud_fixed_clks[] __initdata = {
> +	FRATE(0, "ioclk_jtag_tclk", NULL, CLK_IS_ROOT, 188000000),
> +	FRATE(0, "ioclk_slimbus_clk", NULL, CLK_IS_ROOT, 188000000),
> +	FRATE(0, "ioclk_i2s_bclk", NULL, CLK_IS_ROOT, 188000000),

Are you sure about these clock rates?
As per UM I have, these are having rates as 33 MHz, 25 MHz and 50 MHz 
respectively.

> +};
> +
> +static struct samsung_mux_clock aud_mux_clks[] __initdata = {
> +	/* MUX_SEL_AUD0 */
> +	MUX(CLK_MOUT_AUD_PLL_USER, "mout_aud_pll_user",
> +			mout_aud_pll_user_aud_p, MUX_SEL_AUD0, 0, 1),
> +
> +	/* MUX_SEL_AUD1 */
> +	MUX(CLK_MOUT_SCLK_AUD_PCM, "mout_sclk_aud_pcm", mout_sclk_aud_pcm_p,
> +			MUX_SEL_AUD1, 8, 1),
> +	MUX(CLK_MOUT_SCLK_AUD_I2S, "mout_sclk_aud_i2s", mout_sclk_aud_i2s_p,
> +			MUX_SEL_AUD1, 0, 1),
> +};
> +

Thanks,
Pankaj Dubey