[PATCH v5 1/4] ARM: OMAP2+: Make sure pandora_wl1251_init_card() applies to SDIO only

[Tony Lindgren]

* Doug Anderson <dianders at chromium.org> [141202 15:45]:
> In preparation for having init_card() called for all card types (not
> just SDIO), change pandora_wl1251_init_card() so it checks whether the
> card type is SDIO.

Seems OK to me and should not conflict with linux-omap patches:

Acked-by: Tony Lindgren <tony at atomide.com>

> Signed-off-by: Doug Anderson <dianders at chromium.org>
> ---
> Changes in v5:
> - Split fixup to pandora_wl1251_init_card() into its own patch.
> 
> Changes in v3: None
> Changes in v2: None
> 
>  arch/arm/mach-omap2/board-omap3pandora.c | 14 ++++++++------
>  1 file changed, 8 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
> index 7f17087..969e100 100644
> --- a/arch/arm/mach-omap2/board-omap3pandora.c
> +++ b/arch/arm/mach-omap2/board-omap3pandora.c
> @@ -254,12 +254,14 @@ static void pandora_wl1251_init_card(struct mmc_card *card)
>  	 * We have TI wl1251 attached to MMC3. Pass this information to
>  	 * SDIO core because it can't be probed by normal methods.
>  	 */
> -	card->quirks |= MMC_QUIRK_NONSTD_SDIO;
> -	card->cccr.wide_bus = 1;
> -	card->cis.vendor = 0x104c;
> -	card->cis.device = 0x9066;
> -	card->cis.blksize = 512;
> -	card->cis.max_dtr = 20000000;
> +	if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
> +		card->quirks |= MMC_QUIRK_NONSTD_SDIO;
> +		card->cccr.wide_bus = 1;
> +		card->cis.vendor = 0x104c;
> +		card->cis.device = 0x9066;
> +		card->cis.blksize = 512;
> +		card->cis.max_dtr = 20000000;
> +	}
>  }
>  
>  static struct omap2_hsmmc_info omap3pandora_mmc[] = {
> -- 
> 2.2.0.rc0.207.ga3a616c
>