[PATCH 10/10] ARM: dts: sun9i: Enable mmc2 on A80 Optimus Board

Chen-Yu Tsai wens at csie.org
Tue Dec 2 22:36:05 PST 2014


The A80 Optimus Board has a 16GB eMMC connected to mmc2, with 8 bit
wide data bus.

Signed-off-by: Chen-Yu Tsai <wens at csie.org>
Signed-off-by: Andreas Färber <afaerber at suse.de>
---
 arch/arm/boot/dts/sun9i-a80-optimus.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index 02a4aa7..69b30dd 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -69,6 +69,15 @@
 			status = "okay";
 		};
 
+		mmc2: mmc at 01c11000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc2_pins>, <&mmc2_8bit_pins>;
+			vmmc-supply = <&reg_vcc3v0>;
+			bus-width = <8>;
+			non-removable;
+			status = "okay";
+		};
+
 		pio: pinctrl at 06000800 {
 			i2c3_pins_a: i2c3 at 0 {
 				/* Enable internal pull-up */
-- 
2.1.3




More information about the linux-arm-kernel mailing list