[PATCH 0/3 RESEND] ARM: dts: sabrelite I2C and HDMI additions

[Gary Bisson]

Eric, All,

On Tue, Dec 2, 2014 at 2:37 PM, Eric Nelson
<eric.nelson at boundarydevices.com> wrote:
> This set of patches adds support for I2C2/3 busses and HDMI output
> for the SABRE Lite board.
>
> The content was gratuitously copied from the following commits
> for the Nitrogen6X board made by Lucas Stach, Michael Olbrich,
> and Philipp Zabel at Pengutronix:
>
>         43c3c00 - ARM: dts: nitrogen6x: add i2c2
>         d653620 - ARM: dts: nitrogen6x: add hdmi
>         1dffdd6 - ARM: dts: nitrogen6x: add i2c3
>
> Eric Nelson (3):
>   ARM: dts: sabrelite: add i2c2
>   ARM: dts: sabrelite: add hdmi
>   ARM: dts: sabrelite: add i2c3
>
>  arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 33 ++++++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
>
> Re-sending to add Shawn Guo to the CC list.
>
> --
> 1.9.1
>

Tested on a SabreLite (iMX6q rev1.2), it works great once the ldb node
is removed from imx6qdl-sabrelite.dtsi.
It is to be noted that I've applied the patches on top of the
linux-stable tree. Eric, are you using Shawn's tree? I'll try with
that latter to see if I can keep both ldb and hdmi nodes at the same
time.

Thanks,
Gary