[PATCH 2/2] mmc: sdhci-esdhc-imx: enable IPG clock for sdio interrupts

Stefan Agner stefan at agner.ch
Tue Dec 2 08:47:25 PST 2014


Enable IPG clock for sdio interrupts while runtime PM, since this
clock is needed for register access. The need of this clock has been
verified on Vybrid, but this is probably true for i.MX53 and maybe
others. The need for bus access during runtime suspend has been
introduced with be138554a792 ("mmc: sdhci: allow sdio interrupts
while sdhci runtime suspended").

Signed-off-by: Stefan Agner <stefan at agner.ch>
---
 drivers/mmc/host/sdhci-esdhc-imx.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 587ee0e..b7e9ad1 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -1193,10 +1193,10 @@ static int sdhci_esdhc_runtime_suspend(struct device *dev)
 
 	ret = sdhci_runtime_suspend_host(host);
 
-	if (!sdhci_sdio_irq_enabled(host)) {
+	if (!sdhci_sdio_irq_enabled(host))
 		clk_disable_unprepare(imx_data->clk_per);
-		clk_disable_unprepare(imx_data->clk_ipg);
-	}
+
+	clk_disable_unprepare(imx_data->clk_ipg);
 	clk_disable_unprepare(imx_data->clk_ahb);
 
 	return ret;
@@ -1208,10 +1208,10 @@ static int sdhci_esdhc_runtime_resume(struct device *dev)
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct pltfm_imx_data *imx_data = pltfm_host->priv;
 
-	if (!sdhci_sdio_irq_enabled(host)) {
+	if (!sdhci_sdio_irq_enabled(host))
 		clk_prepare_enable(imx_data->clk_per);
-		clk_prepare_enable(imx_data->clk_ipg);
-	}
+
+	clk_prepare_enable(imx_data->clk_ipg);
 	clk_prepare_enable(imx_data->clk_ahb);
 
 	return sdhci_runtime_resume_host(host);
-- 
2.1.3




More information about the linux-arm-kernel mailing list