[PATCH 1/2] doc: dt/bindings: input: introduce TI DRV2667 haptic driver description

[Dan Murphy]

DRV2667 is a haptic/vibrator driver for Linear Resonant Actuators.
Adding dt binding for this part

Signed-off-by: Dan Murphy <dmurphy at ti.com>
---
 .../devicetree/bindings/input/ti,drv2667.txt       |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/ti,drv2667.txt

diff --git a/Documentation/devicetree/bindings/input/ti,drv2667.txt b/Documentation/devicetree/bindings/input/ti,drv2667.txt
new file mode 100644
index 0000000..525216d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ti,drv2667.txt
@@ -0,0 +1,18 @@
+Texas Instruments - drv2667 Haptics driver
+
+The drv2667 uses serial control bus communicates through I2C protocols
+
+Required properties:
+	- compatible - "ti,drv2667" - DRV2667
+	- reg -  I2C slave address
+	- vbat-supply - Required supply regulator
+
+Example:
+
+drv2667: drv2667 at 59 {
+		compatible = "ti,drv2667";
+		reg = <0x59>;
+};
+
+For more product information please see the link below:
+http://www.ti.com/product/drv2667
-- 
1.7.9.5