[PATCH 1/2] ARM: dts: Enable PMIC interrupts on ODROID

[Kukjin Kim]

On 08/12/14 08:06, Tomeu Vizoso wrote:
> Tested on an Odroid-U2:
>
> Tested-by: Tomeu Vizoso<tomeu at tomeuvizoso.net>
>
> Thanks,
>
> Tomeu
>
>
> On 16 July 2014 10:50, Daniel Drake<drake at endlessm.com>  wrote:
>> The ODROID kernel shows that the PMIC interrupt line is hooked up
>> to pin GPX3-2.
>>
>> This is needed for the max77686-irq driver to create the PMIC IRQ
>> domain, which is needed by max77686-rtc.
>>
>> Signed-off-by: Daniel Drake<drake at endlessm.com>
>> ---
>>   arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 11 +++++++++++
>>   1 file changed, 11 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
>> index 6d6d23c..cb6f55f 100644
>> --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
>> +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
>> @@ -148,6 +148,10 @@
>>
>>                  max77686: pmic at 09 {
>>                          compatible = "maxim,max77686";
>> +                       interrupt-parent =<&gpx3>;
>> +                       interrupts =<2 0>;
>> +                       pinctrl-names = "default";
>> +                       pinctrl-0 =<&max77686_irq>;
>>                          reg =<0x09>;
>>                          #clock-cells =<1>;
>>
>> @@ -368,4 +372,11 @@
>>                  samsung,pins = "gpx1-3";
>>                  samsung,pin-pud =<0>;
>>          };
>> +
>> +       max77686_irq: max77686-irq {
>> +               samsung,pins = "gpx3-2";
>> +               samsung,pin-function =<0>;
>> +               samsung,pin-pud =<0>;
>> +               samsung,pin-drv =<0>;
>> +       };
>>   };

Thanks, applied this series.

- Kukjin