[PATCH 3/4 V3] irqchip: gic: Add supports for ARM GICv2m MSI(-X)

Rob Herring robherring2 at gmail.com
Sun Aug 17 17:41:45 PDT 2014


On 07/09/2014 06:05 PM, suravee.suthikulpanit at amd.com wrote:
> From: Suravee Suthikulpanit <Suravee.Suthikulpanit at amd.com>
> 
> ARM GICv2m specification extends GICv2 to support MSI(-X) with
> a new set of register frames. This patch introduces support for
> the non-secure GICv2m register frame.
> 
> The driver currently matchs "arm,gic-400-plus" in device tree binding,
> which implements GICv2m.
> 
> The "msi-controller" keyword in ARM GIC devicetree binding is used to indentify
> GIC driver that it should enable MSI(-X) support, The region of GICv2m MSI
> register frame is specified using the register frame index 4 in the device tree.
> MSI support is optional.
> 
> Each GIC maintains an "msi_chip" structure. To discover the msi_chip,
> PCI host driver can do the following:
> 
>     struct device_node *gic_node = of_irq_find_parent(pdev->dev.of_node);
>     pcie_bus->msi_chip = of_pci_find_msi_chip_by_node(gic_node);
> 
> Cc: Mark Rutland <Mark.Rutland at arm.com>
> Cc: Marc Zyngier <Marc.Zyngier at arm.com>
> Cc: Jason Cooper <jason at lakedaemon.net>
> Cc: Catalin Marinas <Catalin.Marinas at arm.com>
> Cc: Will Deacon <Will.Deacon at arm.com>
> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit at amd.com>
> ---
>  Documentation/devicetree/bindings/arm/gic.txt |  20 +-
>  arch/arm64/Kconfig                            |   1 +
>  drivers/irqchip/Kconfig                       |   7 +
>  drivers/irqchip/Makefile                      |   1 +
>  drivers/irqchip/irq-gic-v2m.c                 | 251 ++++++++++++++++++++++++++
>  drivers/irqchip/irq-gic-v2m.h                 |  13 ++
>  drivers/irqchip/irq-gic.c                     |  23 ++-
>  drivers/irqchip/irq-gic.h                     |  31 +++-
>  8 files changed, 334 insertions(+), 13 deletions(-)
>  create mode 100644 drivers/irqchip/irq-gic-v2m.c
>  create mode 100644 drivers/irqchip/irq-gic-v2m.h
> 
> diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
> index 5573c08..d2eea0b 100644
> --- a/Documentation/devicetree/bindings/arm/gic.txt
> +++ b/Documentation/devicetree/bindings/arm/gic.txt
> @@ -12,11 +12,14 @@ Main node required properties:
>  
>  - compatible : should be one of:
>  	"arm,gic-400"
> +	"arm,gic-400-v2m"

There is no such hardware. There is a gic-400 from ARM and then there
are gic-400 plus extra logic from each Si vendor. So this should have a
vendor specific compatible string in case there are quirks in your h/w.

>  	"arm,cortex-a15-gic"
>  	"arm,cortex-a9-gic"
>  	"arm,cortex-a7-gic"
>  	"arm,arm11mp-gic"
> +
>  - interrupt-controller : Identifies the node as an interrupt controller
> +
>  - #interrupt-cells : Specifies the number of cells needed to encode an
>    interrupt source.  The type shall be a <u32> and the value shall be 3.
>  
> @@ -37,9 +40,16 @@ Main node required properties:
>  	the 8 possible cpus attached to the GIC.  A bit set to '1' indicated
>  	the interrupt is wired to that CPU.  Only valid for PPI interrupts.
>  
> -- reg : Specifies base physical address(s) and size of the GIC registers. The
> -  first region is the GIC distributor register base and size. The 2nd region is
> -  the GIC cpu interface register base and size.
> +- reg : Specifies base physical address(s) and size of the GIC register frames.
> +
> +  Region | Description
> +  Index  |
> +  -------------------------------------------------------------------
> +     0   | GIC distributor register base and size
> +     1   | GIC cpu interface register base and size
> +     2   | VGIC interface control register base and size (Optional)
> +     3   | VGIC CPU interface register base and size (Optional)
> +     4   | GICv2m MSI interface register base and size (Optional)
>  
>  Optional
>  - interrupts	: Interrupt source of the parent interrupt controller on
> @@ -55,6 +65,10 @@ Optional
>  		  by a crossbar/multiplexer preceding the GIC. The GIC irq
>  		  input line is assigned dynamically when the corresponding
>  		  peripheral's crossbar line is mapped.
> +
> +- msi-controller : Identifies the node as an MSI controller.
> +                   (Required for GICv2m)
> +
>  Example:
>  
>  	intc: interrupt-controller at fff11000 {
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index be52492..0f9b11d 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -9,6 +9,7 @@ config ARM64
>  	select ARM_AMBA
>  	select ARM_ARCH_TIMER
>  	select ARM_GIC
> +	select ARM_GIC_V2M if (PCI && PCI_MSI)
>  	select ARM_GIC_V3
>  	select BUILDTIME_EXTABLE_SORT
>  	select CLONE_BACKWARDS
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index 7f0c2a3..274910d 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -7,6 +7,13 @@ config ARM_GIC
>  	select IRQ_DOMAIN
>  	select MULTI_IRQ_HANDLER
>  
> +config ARM_GIC_V2M
> +	bool
> +	select IRQ_DOMAIN
> +	select MULTI_IRQ_HANDLER
> +	depends on ARM_GIC
> +	depends on PCI && PCI_MSI
> +
>  config GIC_NON_BANKED
>  	bool
>  
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index c57e642..09c035a 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -16,6 +16,7 @@ obj-$(CONFIG_ARCH_SUNXI)		+= irq-sun4i.o
>  obj-$(CONFIG_ARCH_SUNXI)		+= irq-sunxi-nmi.o
>  obj-$(CONFIG_ARCH_SPEAR3XX)		+= spear-shirq.o
>  obj-$(CONFIG_ARM_GIC)			+= irq-gic.o irq-gic-common.o
> +obj-$(CONFIG_ARM_GIC_V2M)		+= irq-gic-v2m.o
>  obj-$(CONFIG_ARM_GIC_V3)		+= irq-gic-v3.o irq-gic-common.o
>  obj-$(CONFIG_ARM_NVIC)			+= irq-nvic.o
>  obj-$(CONFIG_ARM_VIC)			+= irq-vic.o
> diff --git a/drivers/irqchip/irq-gic-v2m.c b/drivers/irqchip/irq-gic-v2m.c
> new file mode 100644
> index 0000000..e54ca1d
> --- /dev/null
> +++ b/drivers/irqchip/irq-gic-v2m.c
> @@ -0,0 +1,251 @@
> +/*
> + * ARM GIC v2m MSI(-X) support
> + * Support for Message Signalelled Interrupts for systems that
> + * implement ARM Generic Interrupt Controller: GICv2m.
> + *
> + * Copyright (C) 2014 Advanced Micro Devices, Inc.
> + * Authors: Suravee Suthikulpanit <suravee.suthikulpanit at amd.com>
> + *          Harish Kasiviswanathan <harish.kasiviswanathan at amd.com>
> + *          Brandon Anderson <brandon.anderson at amd.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published
> + * by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pci.h>
> +#include <linux/irq.h>
> +#include <linux/spinlock.h>
> +#include <linux/slab.h>
> +#include <linux/of_address.h>
> +#include <linux/of_pci.h>
> +#include <linux/bitmap.h>
> +
> +#include "irqchip.h"
> +#include "irq-gic.h"
> +
> +/*
> +* MSI_TYPER:
> +*     [31:26] Reserved
> +*     [25:16] lowest SPI assigned to MSI
> +*     [15:10] Reserved
> +*     [9:0]   Numer of SPIs assigned to MSI
> +*/
> +#define V2M_MSI_TYPER			0x008
> +#define V2M_MSI_TYPER_BASE_SHIFT	(16)
> +#define V2M_MSI_TYPER_BASE_MASK		(0x3FF)
> +#define V2M_MSI_TYPER_NUM_MASK		(0x3FF)
> +#define V2M_MSI_SETSPI_NS		0x040
> +#define V2M_MIN_SPI			32
> +#define V2M_MAX_SPI			1019
> +
> +#define GIC_OF_MSIV2M_RANGE_INDEX	4
> +
> +/*
> + * alloc_msi_irq - Allocate MSIs from avaialbe MSI bitmap.
> + * @data: Pointer to v2m_data
> + * @nvec: Number of interrupts to allocate
> + * @irq: Pointer to the allocated irq
> + *
> + * Allocates interrupts only if the contiguous range of MSIs
> + * with specified nvec are available. Otherwise return the number
> + * of available interrupts. If none are available, then returns -ENOENT.
> + */
> +static int alloc_msi_irq(struct v2m_data *data, int nvec, int *irq)
> +{
> +	int size = data->nr_spis;
> +	int next = size, i = nvec, ret;
> +
> +	/* We should never allocate more than available nr_spis */
> +	if (i >= size)
> +		i = size;
> +
> +	spin_lock(&data->msi_cnt_lock);
> +
> +	for (; i > 0; i--) {
> +		next = bitmap_find_next_zero_area(data->bm,
> +					size, 0, i, 0);
> +		if (next < size)
> +			break;
> +	}
> +
> +	if (i != nvec) {
> +		ret = i ? : -ENOENT;
> +	} else {
> +		bitmap_set(data->bm, next, nvec);
> +		*irq = data->spi_start + next;
> +		ret = 0;
> +	}
> +
> +	spin_unlock(&data->msi_cnt_lock);
> +
> +	return ret;
> +}
> +
> +static struct v2m_data *to_v2m_data(struct msi_chip *chip)
> +{
> +	struct gic_chip_data *gic = container_of(chip, struct gic_chip_data,
> +						 msi_chip);
> +	return &gic->v2m_data;
> +}
> +
> +static void gicv2m_teardown_msi_irq(struct msi_chip *chip, unsigned int irq)
> +{
> +	int pos;
> +	struct v2m_data *data = to_v2m_data(chip);
> +
> +	spin_lock(&data->msi_cnt_lock);
> +
> +	pos = irq - data->spi_start;
> +	if (pos >= 0 && pos < data->nr_spis)
> +		bitmap_clear(data->bm, pos, 1);
> +
> +	spin_unlock(&data->msi_cnt_lock);
> +}
> +
> +static int gicv2m_setup_msi_irq(struct msi_chip *chip, struct pci_dev *pdev,
> +		      struct msi_desc *desc)
> +{
> +	int avail, irq = 0;
> +	struct msi_msg msg;
> +	phys_addr_t addr;
> +	struct v2m_data *data = to_v2m_data(chip);
> +
> +	if (!desc) {
> +		dev_err(&pdev->dev,
> +			"GICv2m: MSI setup failed. Invalid msi descriptor\n");
> +		return -EINVAL;
> +	}
> +
> +	avail = alloc_msi_irq(data, 1, &irq);
> +	if (avail != 0) {
> +		dev_err(&pdev->dev,
> +			"GICv2m: MSI setup failed. Cannnot allocate IRQ\n");
> +		return -ENOSPC;
> +	}
> +
> +	irq_set_chip_data(irq, chip);
> +	irq_set_msi_desc(irq, desc);
> +	irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
> +
> +	addr = data->res.start + V2M_MSI_SETSPI_NS;
> +
> +	msg.address_hi = (u32)(addr >> 32);
> +	msg.address_lo = (u32)(addr);
> +	msg.data = irq;
> +	write_msi_msg(irq, &msg);
> +
> +	return 0;
> +}
> +
> +static int __init
> +gicv2m_msi_init(struct device_node *node, struct v2m_data *v2m)
> +{
> +	unsigned int val;
> +
> +	if (of_address_to_resource(node, GIC_OF_MSIV2M_RANGE_INDEX,
> +				   &v2m->res)) {
> +		pr_err("GICv2m: Failed locate GICv2m MSI register frame\n");
> +		return -EINVAL;
> +	}
> +
> +	v2m->base = of_iomap(node, GIC_OF_MSIV2M_RANGE_INDEX);
> +	if (!v2m->base) {
> +		pr_err("GICv2m: Failed to map GIC MSI registers\n");
> +		return -EINVAL;
> +	}
> +
> +	val = readl_relaxed(v2m->base + V2M_MSI_TYPER);
> +	if (!val) {
> +		pr_warn("GICv2m: Failed to read V2M_MSI_TYPER register\n");
> +		return -EINVAL;
> +	}
> +
> +	v2m->spi_start = (val >> V2M_MSI_TYPER_BASE_SHIFT) &
> +				V2M_MSI_TYPER_BASE_MASK;
> +	v2m->nr_spis = val & V2M_MSI_TYPER_NUM_MASK;
> +	if ((v2m->spi_start < V2M_MIN_SPI) || (v2m->nr_spis >= V2M_MAX_SPI)) {
> +			pr_err("GICv2m: Invalid MSI_TYPER (%#x)\n", val);
> +			return -EINVAL;
> +	}
> +
> +	v2m->bm = kzalloc(sizeof(long) * BITS_TO_LONGS(v2m->nr_spis),
> +			  GFP_KERNEL);
> +	if (!v2m->bm) {
> +		pr_err("GICv2m: Failed to allocate MSI bitmap\n");
> +		return -ENOMEM;
> +	}
> +
> +	spin_lock_init(&v2m->msi_cnt_lock);
> +
> +	pr_info("GICv2m: SPI range [%d:%d]\n",
> +		v2m->spi_start, (v2m->spi_start + v2m->nr_spis));
> +
> +	return 0;
> +}
> +
> +static void gicv2m_mask_irq(struct irq_data *d)
> +{
> +	gic_mask_irq(d);
> +	if (d->msi_desc)
> +		mask_msi_irq(d);
> +}
> +
> +static void gicv2m_unmask_irq(struct irq_data *d)
> +{
> +	gic_unmask_irq(d);
> +	if (d->msi_desc)
> +		unmask_msi_irq(d);
> +}
> +
> +static struct irq_chip gicv2m_chip = {
> +	.name			= "GICv2m",
> +	.irq_mask		= gicv2m_mask_irq,
> +	.irq_unmask		= gicv2m_unmask_irq,
> +	.irq_eoi		= gic_eoi_irq,
> +	.irq_set_type		= gic_set_type,
> +	.irq_retrigger		= gic_retrigger,
> +#ifdef CONFIG_SMP
> +	.irq_set_affinity	= gic_set_affinity,
> +#endif
> +#ifdef CONFIG_PM
> +	.irq_set_wake		= gic_set_wake,
> +#endif
> +};
> +
> +#ifdef CONFIG_OF
> +static int __init
> +gicv2m_of_init(struct device_node *node, struct device_node *parent)
> +{
> +	struct gic_chip_data *gic;
> +	int ret;
> +
> +	ret = _gic_of_init(node, parent, &gicv2m_chip, &gic);
> +	if (ret) {
> +		pr_err("GICv2m: Failed to initialize GIC\n");
> +		return ret;
> +	}
> +
> +	gic->msi_chip.owner = THIS_MODULE;
> +	gic->msi_chip.of_node = node;
> +	gic->msi_chip.setup_irq = gicv2m_setup_msi_irq;
> +	gic->msi_chip.teardown_irq = gicv2m_teardown_msi_irq;
> +	ret = of_pci_msi_chip_add(&gic->msi_chip);
> +	if (ret) {
> +		/* MSI is optional and not supported here */
> +		pr_info("GICv2m: MSI is not supported.\n");
> +		return 0;
> +	}
> +
> +	ret = gicv2m_msi_init(node, &gic->v2m_data);
> +	if (ret)
> +		return ret;
> +	return ret;
> +}
> +
> +IRQCHIP_DECLARE(arm_gic_400_v2m, "arm,gic-400-v2m", gicv2m_of_init);
> +
> +#endif /* CONFIG_OF */
> diff --git a/drivers/irqchip/irq-gic-v2m.h b/drivers/irqchip/irq-gic-v2m.h
> new file mode 100644
> index 0000000..2d93a87
> --- /dev/null
> +++ b/drivers/irqchip/irq-gic-v2m.h
> @@ -0,0 +1,13 @@
> +#ifndef _IRQ_GIC_V2M_H_
> +#define _IRQ_GIC_V2M_H_
> +
> +struct v2m_data {
> +	spinlock_t msi_cnt_lock;
> +	struct resource res;      /* GICv2m resource */
> +	void __iomem *base;       /* GICv2m virt address */
> +	unsigned int spi_start;   /* The SPI number that MSIs start */
> +	unsigned int nr_spis;     /* The number of SPIs for MSIs */
> +	unsigned long *bm;        /* MSI vector bitmap */
> +};
> +
> +#endif /*_IRQ_GIC_V2M_H_*/
> diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
> index 966e1d5..a054e0d 100644
> --- a/drivers/irqchip/irq-gic.c
> +++ b/drivers/irqchip/irq-gic.c
> @@ -111,15 +111,34 @@ static inline void gic_set_base_accessor(struct gic_chip_data *data,
>  #define gic_set_base_accessor(d, f)
>  #endif
>  
> +static inline
> +struct gic_chip_data *irq_data_get_gic_chip_data(struct irq_data *d)
> +{
> +	struct gic_chip_data *gic_data;
> +	struct msi_chip *mchip;
> +
> +	/*
> +	 * For MSI, irq_data.chip_data points to struct msi_chip.
> +	 * For non-MSI, irq_data.chip_data points to struct gic_chip_data.
> +	 */
> +	if (d->msi_desc) {
> +		mchip = irq_data_get_irq_chip_data(d);
> +		gic_data = container_of(mchip, struct gic_chip_data, msi_chip);
> +	} else {
> +		gic_data = irq_data_get_irq_chip_data(d);
> +	}
> +	return gic_data;
> +}
> +
>  static inline void __iomem *gic_dist_base(struct irq_data *d)
>  {
> -	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
> +	struct gic_chip_data *gic_data = irq_data_get_gic_chip_data(d);
>  	return gic_data_dist_base(gic_data);
>  }
>  
>  static inline void __iomem *gic_cpu_base(struct irq_data *d)
>  {
> -	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
> +	struct gic_chip_data *gic_data = irq_data_get_gic_chip_data(d);
>  	return gic_data_cpu_base(gic_data);
>  }
>  
> diff --git a/drivers/irqchip/irq-gic.h b/drivers/irqchip/irq-gic.h
> index a4beb4a..1c6547d 100644
> --- a/drivers/irqchip/irq-gic.h
> +++ b/drivers/irqchip/irq-gic.h
> @@ -8,6 +8,17 @@ union gic_base {
>  	void __percpu * __iomem *percpu_base;
>  };
>  
> +#ifdef CONFIG_ARM_GIC_V2M
> +struct v2m_data {
> +	spinlock_t msi_cnt_lock;
> +	struct resource res;      /* GICv2m resource */
> +	void __iomem *base;       /* GICv2m virt address */
> +	unsigned int spi_start;   /* The SPI number that MSIs start */
> +	unsigned int nr_spis;     /* The number of SPIs for MSIs */
> +	unsigned long *bm;        /* MSI vector bitmap */
> +};
> +#endif

This doesn't need ifdef.

> +
>  struct gic_chip_data {
>  	union gic_base dist_base;
>  	union gic_base cpu_base;
> @@ -20,12 +31,23 @@ struct gic_chip_data {
>  #endif
>  	struct irq_domain *domain;
>  	unsigned int gic_irqs;
> -	struct irq_chip *irq_chip;
>  #ifdef CONFIG_GIC_NON_BANKED
>  	void __iomem *(*get_base)(union gic_base *);
>  #endif
> +	struct irq_chip *irq_chip;
> +	struct msi_chip msi_chip;
> +#ifdef CONFIG_ARM_GIC_V2M
> +	struct v2m_data v2m_data;
> +#endif

Making this a ptr would mean you only use space when the h/w supports
v2m. It appears that would require a pointer in msi_chip to get access
to gic_chip_data.

>  };
>  
> +#ifdef CONFIG_OF
> +int _gic_of_init(struct device_node *node,
> +		 struct device_node *parent,
> +		 struct irq_chip *chip,
> +		 struct gic_chip_data **gic) __init;
> +#endif
> +
>  void gic_mask_irq(struct irq_data *d);
>  void gic_unmask_irq(struct irq_data *d);
>  void gic_eoi_irq(struct irq_data *d);
> @@ -42,11 +64,4 @@ int gic_set_affinity(struct irq_data *d,
>  int gic_set_wake(struct irq_data *d, unsigned int on);
>  #endif
>  
> -#ifdef CONFIG_OF
> -int _gic_of_init(struct device_node *node,
> -		 struct device_node *parent,
> -		 struct irq_chip *chip,
> -		 struct gic_chip_data **gic) __init;
> -#endif
> -

This change looks unnecessary.

Rob




More information about the linux-arm-kernel mailing list