[PATCH 02/15] ARM: dts: kirkwood: add node labels
Sebastian Hesselbarth
sebastian.hesselbarth at gmail.com
Wed Apr 30 05:56:29 PDT 2014
This adds missing node labels to Kirkwood common and SoC specific nodes
to allow to reference them more easily.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
---
Cc: Rob Herring <robh+dt at kernel.org>
Cc: Pawel Moll <pawel.moll at arm.com>
Cc: Mark Rutland <mark.rutland at arm.com>
Cc: Ian Campbell <ijc+devicetree at hellion.org.uk>
Cc: Kumar Gala <galak at codeaurora.org>
Cc: Russell King <linux at arm.linux.org.uk>
Cc: Jason Cooper <jason at lakedaemon.net>
Cc: Andrew Lunn <andrew at lunn.ch>
Cc: Gregory Clement <gregory.clement at free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
Cc: devicetree at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
arch/arm/boot/dts/kirkwood-6192.dtsi | 10 +++++-----
arch/arm/boot/dts/kirkwood-6281.dtsi | 10 +++++-----
arch/arm/boot/dts/kirkwood-6282.dtsi | 16 ++++++++--------
arch/arm/boot/dts/kirkwood.dtsi | 16 ++++++++--------
4 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi
index 3916937d6818..294a6fa0208c 100644
--- a/arch/arm/boot/dts/kirkwood-6192.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6192.dtsi
@@ -1,6 +1,6 @@
/ {
mbus {
- pcie-controller {
+ pciec: pcie-controller {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
@@ -15,7 +15,7 @@
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>;
- pcie at 1,0 {
+ pcie0: pcie at 1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
@@ -76,14 +76,14 @@
};
};
- rtc at 10300 {
+ rtc: rtc at 10300 {
compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
reg = <0x10300 0x20>;
interrupts = <53>;
clocks = <&gate_clk 7>;
};
- sata at 80000 {
+ sata: sata at 80000 {
compatible = "marvell,orion-sata";
reg = <0x80000 0x5000>;
interrupts = <21>;
@@ -92,7 +92,7 @@
status = "disabled";
};
- mvsdio at 90000 {
+ sdio: mvsdio at 90000 {
compatible = "marvell,orion-sdio";
reg = <0x90000 0x200>;
interrupts = <28>;
diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi
index 416d96e1302f..2560cbbdb0b3 100644
--- a/arch/arm/boot/dts/kirkwood-6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6281.dtsi
@@ -1,6 +1,6 @@
/ {
mbus {
- pcie-controller {
+ pciec: pcie-controller {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
@@ -15,7 +15,7 @@
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>;
- pcie at 1,0 {
+ pcie0: pcie at 1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
@@ -76,14 +76,14 @@
};
};
- rtc at 10300 {
+ rtc: rtc at 10300 {
compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
reg = <0x10300 0x20>;
interrupts = <53>;
clocks = <&gate_clk 7>;
};
- sata at 80000 {
+ sata: sata at 80000 {
compatible = "marvell,orion-sata";
reg = <0x80000 0x5000>;
interrupts = <21>;
@@ -94,7 +94,7 @@
status = "disabled";
};
- mvsdio at 90000 {
+ sdio: mvsdio at 90000 {
compatible = "marvell,orion-sdio";
reg = <0x90000 0x200>;
interrupts = <28>;
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index 2902e0d7971d..f4b4786b9a01 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -1,6 +1,6 @@
/ {
mbus {
- pcie-controller {
+ pciec: pcie-controller {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
@@ -19,7 +19,7 @@
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1.0 MEM */
0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1.0 IO */>;
- pcie at 1,0 {
+ pcie0: pcie at 1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
@@ -36,7 +36,7 @@
status = "disabled";
};
- pcie at 2,0 {
+ pcie1: pcie at 2,0 {
device_type = "pci";
assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
@@ -104,20 +104,20 @@
};
};
- thermal at 10078 {
+ thermal: thermal at 10078 {
compatible = "marvell,kirkwood-thermal";
reg = <0x10078 0x4>;
status = "okay";
};
- rtc at 10300 {
+ rtc: rtc at 10300 {
compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
reg = <0x10300 0x20>;
interrupts = <53>;
clocks = <&gate_clk 7>;
};
- i2c at 11100 {
+ i2c1: i2c at 11100 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11100 0x20>;
#address-cells = <1>;
@@ -128,7 +128,7 @@
status = "disabled";
};
- sata at 80000 {
+ sata: sata at 80000 {
compatible = "marvell,orion-sata";
reg = <0x80000 0x5000>;
interrupts = <21>;
@@ -139,7 +139,7 @@
status = "disabled";
};
- mvsdio at 90000 {
+ sdio: mvsdio at 90000 {
compatible = "marvell,orion-sdio";
reg = <0x90000 0x200>;
interrupts = <28>;
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 90384587c278..2570e0f1673f 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -40,7 +40,7 @@
pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */
- crypto at 0301 {
+ cesa: crypto at 0301 {
compatible = "marvell,orion-crypto";
reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>,
<MBUS_ID(0x03, 0x01) 0 0x800>;
@@ -77,7 +77,7 @@
#clock-cells = <1>;
};
- spi at 10600 {
+ spi0: spi at 10600 {
compatible = "marvell,orion-spi";
#address-cells = <1>;
#size-cells = <0>;
@@ -123,7 +123,7 @@
status = "disabled";
};
- serial at 12000 {
+ uart0: serial at 12000 {
compatible = "ns16550a";
reg = <0x12000 0x100>;
reg-shift = <2>;
@@ -132,7 +132,7 @@
status = "disabled";
};
- serial at 12100 {
+ uart1: serial at 12100 {
compatible = "ns16550a";
reg = <0x12100 0x100>;
reg-shift = <2>;
@@ -146,7 +146,7 @@
reg = <0x20000 0x80>, <0x1500 0x20>;
};
- system-controller at 20000 {
+ sysc: system-controller at 20000 {
compatible = "marvell,orion-system-controller";
reg = <0x20000 0x120>;
};
@@ -196,7 +196,7 @@
status = "okay";
};
- ehci at 50000 {
+ usb0: ehci at 50000 {
compatible = "marvell,orion-ehci";
reg = <0x50000 0x1000>;
interrupts = <19>;
@@ -204,7 +204,7 @@
status = "okay";
};
- xor at 60800 {
+ dma0: xor at 60800 {
compatible = "marvell,orion-xor";
reg = <0x60800 0x100
0x60A00 0x100>;
@@ -224,7 +224,7 @@
};
};
- xor at 60900 {
+ dma1: xor at 60900 {
compatible = "marvell,orion-xor";
reg = <0x60900 0x100
0x60B00 0x100>;
--
1.9.1
More information about the linux-arm-kernel
mailing list