[PATCH 0/6] Add CPTS support for AM437x

[George Cherian]

The series adds CPTS support for AM4372.

Patch 1 - CPTS clock name harcoding in the driver is removed. 
	  Easier to pass the clock name from dt rather than hardcoding in driver.
	  Also in prepration for DRA7x CPTS support.
Patch 2 - DT changes w.r.t clock changes for AM33xx.
Patch 3 - Enable the CPTS support for both DRA7x and AM4372 in the driver.
Patch 4 - Enable the Annexe F for L2 PTP for AM437x and DRA7x.
Patch 5 - Change the default clocksource to dpll_core_m5 
Patch 6 - DT changes for AM4372.
 
George Cherian (6):
  drivers: net: cpts: Remove hardcoded clock name for CPTS
  ARM: dts: am33xx: Add clock names for cpsw and cpts
  drivers: net: cpsw: Enable CPTS for DRA7xx and AM4372
  drivers: net: cpsw: Enable Annexe F Time sync
  ARM: AM43xx: clk: Change the cpts ref clock source to dpll_core_m5 clk
  ARM: dts: am4372: Add clock names for cpsw and cpts

 arch/arm/boot/dts/am33xx.dtsi  |  2 ++
 arch/arm/boot/dts/am4372.dtsi  |  2 ++
 drivers/clk/ti/clk-43xx.c      | 16 ++++++++++++++++
 drivers/net/ethernet/ti/cpsw.c | 15 ++++++++++-----
 drivers/net/ethernet/ti/cpts.c | 11 ++++-------
 5 files changed, 34 insertions(+), 12 deletions(-)

-- 
1.8.3.1