[PATCH v2 08/10] arm64: efi: add EFI stub

Leif Lindholm leif.lindholm at linaro.org
Fri Apr 25 09:09:12 PDT 2014


From: Mark Salter <msalter at redhat.com>

This patch adds PE/COFF header fields to the start of the kernel
Image so that it appears as an EFI application to UEFI firmware.
An EFI stub is included to allow direct booting of the kernel
Image.

Signed-off-by: Mark Salter <msalter at redhat.com>
[Add support in PE/COFF header for signed images]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
Signed-off-by: Leif Lindholm <leif.lindholm at linaro.org>
---
 arch/arm64/Kconfig              |    5 +-
 arch/arm64/kernel/Makefile      |    4 +-
 arch/arm64/kernel/efi-entry.S   |  109 +++++++++++++++++
 arch/arm64/kernel/efi-stub.c    |   81 +++++++++++++
 arch/arm64/kernel/head.S        |  112 ++++++++++++++++++
 drivers/firmware/efi/arm-stub.c |  247 +++++++++++++++++++++++++++++++++++++++
 6 files changed, 555 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm64/kernel/efi-entry.S
 create mode 100644 arch/arm64/kernel/efi-stub.c
 create mode 100644 drivers/firmware/efi/arm-stub.c

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 392a2d5..a863663 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -290,8 +290,9 @@ config EFI
 	help
 	  This option provides support for runtime services provided
 	  by UEFI firmware (such as non-volatile variables, realtime
-          clock, and platform reset). This is only useful on systems
-	  that have UEFI firmware.
+          clock, and platform reset). A UEFI stub is also provided to
+	  allow the kernel to be booted as an EFI application. This
+	  is only useful on systems that have UEFI firmware.
 
 endmenu
 
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index f57ccd7..db63a0a 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -4,6 +4,8 @@
 
 CPPFLAGS_vmlinux.lds	:= -DTEXT_OFFSET=$(TEXT_OFFSET)
 AFLAGS_head.o		:= -DTEXT_OFFSET=$(TEXT_OFFSET)
+CFLAGS_efi-stub.o 	:= -DTEXT_OFFSET=$(TEXT_OFFSET) \
+			   -I$(src)/../../../scripts/dtc/libfdt
 
 # Object file lists.
 arm64-obj-y		:= cputable.o debug-monitors.o entry.o irq.o fpsimd.o	\
@@ -22,7 +24,7 @@ arm64-obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 arm64-obj-$(CONFIG_ARM64_CPU_SUSPEND)	+= sleep.o suspend.o
 arm64-obj-$(CONFIG_JUMP_LABEL)		+= jump_label.o
 arm64-obj-$(CONFIG_KGDB)		+= kgdb.o
-arm64-obj-$(CONFIG_EFI)			+= efi.o
+arm64-obj-$(CONFIG_EFI)			+= efi.o efi-stub.o efi-entry.o
 
 obj-y					+= $(arm64-obj-y) vdso/
 obj-m					+= $(arm64-obj-m)
diff --git a/arch/arm64/kernel/efi-entry.S b/arch/arm64/kernel/efi-entry.S
new file mode 100644
index 0000000..66716c9
--- /dev/null
+++ b/arch/arm64/kernel/efi-entry.S
@@ -0,0 +1,109 @@
+/*
+ * EFI entry point.
+ *
+ * Copyright (C) 2013, 2014 Red Hat, Inc.
+ * Author: Mark Salter <msalter at redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+#include <asm/assembler.h>
+
+#define EFI_LOAD_ERROR 0x8000000000000001
+
+	__INIT
+
+	/*
+	 * We arrive here from the EFI boot manager with:
+	 *
+	 *    * CPU in little-endian mode
+	 *    * MMU on with identity-mapped RAM
+	 *    * Icache and Dcache on
+	 *
+	 * We will most likely be running from some place other than where
+	 * we want to be. The kernel image wants to be placed at TEXT_OFFSET
+	 * from start of RAM.
+	 */
+ENTRY(efi_stub_entry)
+	/*
+	 * Create a stack frame to save FP/LR with extra space
+	 * for image_addr variable passed to efi_entry().
+	 */
+	stp	x29, x30, [sp, #-32]!
+
+	/*
+	 * Call efi_entry to do the real work.
+	 * x0 and x1 are already set up by firmware. Current runtime
+	 * address of image is calculated and passed via *image_addr.
+	 *
+	 * unsigned long efi_entry(void *handle,
+	 *                         efi_system_table_t *sys_table,
+	 *                         unsigned long *image_addr) ;
+	 */
+	adrp	x8, _text
+	add	x8, x8, #:lo12:_text
+	add	x2, sp, 16
+	str	x8, [x2]
+	bl	efi_entry
+	cmn	x0, #1
+	b.eq	efi_load_fail
+
+	/*
+	 * efi_entry() will have relocated the kernel image if necessary
+	 * and we return here with device tree address in x0 and the kernel
+	 * entry point stored at *image_addr. Save those values in registers
+	 * which are callee preserved.
+	 */
+	mov	x20, x0		// DTB address
+	ldr	x0, [sp, #16]	// relocated _text address
+	mov	x21, x0
+
+	/*
+	 * Flush dcache covering current runtime addresses
+	 * of kernel text/data. Then flush all of icache.
+	 */
+	adrp	x1, _text
+	add	x1, x1, #:lo12:_text
+	adrp	x2, _edata
+	add	x2, x2, #:lo12:_edata
+	sub	x1, x2, x1
+
+	bl	__flush_dcache_area
+	ic	ialluis
+
+	/* Turn off Dcache and MMU */
+	mrs	x0, CurrentEL
+	cmp	x0, #PSR_MODE_EL2t
+	ccmp	x0, #PSR_MODE_EL2h, #0x4, ne
+	b.ne	1f
+	mrs	x0, sctlr_el2
+	bic	x0, x0, #1 << 0	// clear SCTLR.M
+	bic	x0, x0, #1 << 2	// clear SCTLR.C
+	msr	sctlr_el2, x0
+	isb
+	b	2f
+1:
+	mrs	x0, sctlr_el1
+	bic	x0, x0, #1 << 0	// clear SCTLR.M
+	bic	x0, x0, #1 << 2	// clear SCTLR.C
+	msr	sctlr_el1, x0
+	isb
+2:
+	/* Jump to kernel entry point */
+	mov	x0, x20
+	mov	x1, xzr
+	mov	x2, xzr
+	mov	x3, xzr
+	br	x21
+
+efi_load_fail:
+	mov	x0, #EFI_LOAD_ERROR
+	ldp	x29, x30, [sp], #32
+	ret
+
+ENDPROC(efi_stub_entry)
diff --git a/arch/arm64/kernel/efi-stub.c b/arch/arm64/kernel/efi-stub.c
new file mode 100644
index 0000000..60e98a63
--- /dev/null
+++ b/arch/arm64/kernel/efi-stub.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2013, 2014 Linaro Ltd;  <roy.franz at linaro.org>
+ *
+ * This file implements the EFI boot stub for the arm64 kernel.
+ * Adapted from ARM version by Mark Salter <msalter at redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/efi.h>
+#include <linux/libfdt.h>
+#include <asm/sections.h>
+#include <generated/compile.h>
+#include <generated/utsrelease.h>
+
+/*
+ * AArch64 requires the DTB to be 8-byte aligned in the first 512MiB from
+ * start of kernel and may not cross a 2MiB boundary. We set alignment to
+ * 2MiB so we know it won't cross a 2MiB boundary.
+ */
+#define EFI_FDT_ALIGN	SZ_2M   /* used by allocate_new_fdt_and_exit_boot() */
+#define MAX_FDT_OFFSET	SZ_512M
+
+#define efi_call_early(f, ...) sys_table_arg->boottime->f(__VA_ARGS__)
+
+static void efi_char16_printk(efi_system_table_t *sys_table_arg,
+			      efi_char16_t *str);
+
+static efi_status_t efi_open_volume(efi_system_table_t *sys_table,
+				    void *__image, void **__fh);
+static efi_status_t efi_file_close(void *handle);
+
+static efi_status_t
+efi_file_read(void *handle, unsigned long *size, void *addr);
+
+static efi_status_t
+efi_file_size(efi_system_table_t *sys_table, void *__fh,
+	      efi_char16_t *filename_16, void **handle, u64 *file_sz);
+
+/* Include shared EFI stub code */
+#include "../../../drivers/firmware/efi/efi-stub-helper.c"
+#include "../../../drivers/firmware/efi/fdt.c"
+#include "../../../drivers/firmware/efi/arm-stub.c"
+
+
+static efi_status_t handle_kernel_image(efi_system_table_t *sys_table,
+					unsigned long *image_addr,
+					unsigned long *image_size,
+					unsigned long *reserve_addr,
+					unsigned long *reserve_size,
+					unsigned long dram_base,
+					efi_loaded_image_t *image)
+{
+	efi_status_t status;
+	unsigned long kernel_size, kernel_memsize = 0;
+
+	/* Relocate the image, if required. */
+	kernel_size = _edata - _text;
+	if (*image_addr != (dram_base + TEXT_OFFSET)) {
+		kernel_memsize = kernel_size + (_end - _edata);
+		status = efi_relocate_kernel(sys_table, image_addr,
+					     kernel_size, kernel_memsize,
+					     dram_base + TEXT_OFFSET,
+					     PAGE_SIZE);
+		if (status != EFI_SUCCESS) {
+			pr_efi_err(sys_table, "Failed to relocate kernel\n");
+			return status;
+		}
+		if (*image_addr != (dram_base + TEXT_OFFSET)) {
+			pr_efi_err(sys_table, "Failed to alloc kernel memory\n");
+			efi_free(sys_table, kernel_memsize, *image_addr);
+			return EFI_ERROR;
+		}
+		*image_size = kernel_memsize;
+	}
+
+
+	return EFI_SUCCESS;
+}
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 0fd5650..738291b 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -108,8 +108,18 @@
 	/*
 	 * DO NOT MODIFY. Image header expected by Linux boot-loaders.
 	 */
+#ifdef CONFIG_EFI
+efi_head:
+	/*
+	 * This add instruction has no meaningful effect except that
+	 * its opcode forms the magic "MZ" signature required by UEFI.
+	 */
+	add	x13, x18, #0x16
+	b	stext
+#else
 	b	stext				// branch to kernel start, magic
 	.long	0				// reserved
+#endif
 	.quad	TEXT_OFFSET			// Image load offset from start of RAM
 	.quad	0				// reserved
 	.quad	0				// reserved
@@ -120,7 +130,109 @@
 	.byte	0x52
 	.byte	0x4d
 	.byte	0x64
+#ifdef CONFIG_EFI
+	.long	pe_header - efi_head		// Offset to the PE header.
+#else
 	.word	0				// reserved
+#endif
+
+#ifdef CONFIG_EFI
+	.align 3
+pe_header:
+	.ascii	"PE"
+	.short 	0
+coff_header:
+	.short	0xaa64				// AArch64
+	.short	2				// nr_sections
+	.long	0 				// TimeDateStamp
+	.long	0				// PointerToSymbolTable
+	.long	1				// NumberOfSymbols
+	.short	section_table - optional_header	// SizeOfOptionalHeader
+	.short	0x206				// Characteristics.
+						// IMAGE_FILE_DEBUG_STRIPPED |
+						// IMAGE_FILE_EXECUTABLE_IMAGE |
+						// IMAGE_FILE_LINE_NUMS_STRIPPED
+optional_header:
+	.short	0x20b				// PE32+ format
+	.byte	0x02				// MajorLinkerVersion
+	.byte	0x14				// MinorLinkerVersion
+	.long	_edata - stext			// SizeOfCode
+	.long	0				// SizeOfInitializedData
+	.long	0				// SizeOfUninitializedData
+	.long	efi_stub_entry - efi_head	// AddressOfEntryPoint
+	.long	stext - efi_head		// BaseOfCode
+
+extra_header_fields:
+	.quad	0				// ImageBase
+	.long	0x20				// SectionAlignment
+	.long	0x8				// FileAlignment
+	.short	0				// MajorOperatingSystemVersion
+	.short	0				// MinorOperatingSystemVersion
+	.short	0				// MajorImageVersion
+	.short	0				// MinorImageVersion
+	.short	0				// MajorSubsystemVersion
+	.short	0				// MinorSubsystemVersion
+	.long	0				// Win32VersionValue
+
+	.long	_edata - efi_head		// SizeOfImage
+
+	// Everything before the kernel image is considered part of the header
+	.long	stext - efi_head		// SizeOfHeaders
+	.long	0				// CheckSum
+	.short	0xa				// Subsystem (EFI application)
+	.short	0				// DllCharacteristics
+	.quad	0				// SizeOfStackReserve
+	.quad	0				// SizeOfStackCommit
+	.quad	0				// SizeOfHeapReserve
+	.quad	0				// SizeOfHeapCommit
+	.long	0				// LoaderFlags
+	.long	0x6				// NumberOfRvaAndSizes
+
+	.quad	0				// ExportTable
+	.quad	0				// ImportTable
+	.quad	0				// ResourceTable
+	.quad	0				// ExceptionTable
+	.quad	0				// CertificationTable
+	.quad	0				// BaseRelocationTable
+
+	// Section table
+section_table:
+
+	/*
+	 * The EFI application loader requires a relocation section
+	 * because EFI applications must be relocatable.  This is a
+	 * dummy section as far as we are concerned.
+	 */
+	.ascii	".reloc"
+	.byte	0
+	.byte	0			// end of 0 padding of section name
+	.long	0
+	.long	0
+	.long	0			// SizeOfRawData
+	.long	0			// PointerToRawData
+	.long	0			// PointerToRelocations
+	.long	0			// PointerToLineNumbers
+	.short	0			// NumberOfRelocations
+	.short	0			// NumberOfLineNumbers
+	.long	0x42100040		// Characteristics (section flags)
+
+
+	.ascii	".text"
+	.byte	0
+	.byte	0
+	.byte	0        		// end of 0 padding of section name
+	.long	_edata - stext		// VirtualSize
+	.long	stext - efi_head	// VirtualAddress
+	.long	_edata - stext		// SizeOfRawData
+	.long	stext - efi_head	// PointerToRawData
+
+	.long	0		// PointerToRelocations (0 for executables)
+	.long	0		// PointerToLineNumbers (0 for executables)
+	.short	0		// NumberOfRelocations  (0 for executables)
+	.short	0		// NumberOfLineNumbers  (0 for executables)
+	.long	0xe0500020	// Characteristics (section flags)
+	.align 5
+#endif
 
 ENTRY(stext)
 	mov	x21, x0				// x21=FDT
diff --git a/drivers/firmware/efi/arm-stub.c b/drivers/firmware/efi/arm-stub.c
new file mode 100644
index 0000000..19239a9
--- /dev/null
+++ b/drivers/firmware/efi/arm-stub.c
@@ -0,0 +1,247 @@
+/*
+ * EFI stub implementation that is shared by arm and arm64 architectures.
+ * This should be #included by the EFI stub implementation files.
+ *
+ * Copyright (C) 2013,2014 Linaro Limited
+ *     Roy Franz <roy.franz at linaro.org
+ * Copyright (C) 2013 Red Hat, Inc.
+ *     Mark Salter <msalter at redhat.com>
+ *
+ * This file is part of the Linux kernel, and is made available under the
+ * terms of the GNU General Public License version 2.
+ *
+ */
+
+static efi_status_t efi_open_volume(efi_system_table_t *sys_table_arg,
+				    void *__image, void **__fh)
+{
+	efi_file_io_interface_t *io;
+	efi_loaded_image_t *image = __image;
+	efi_file_handle_t *fh;
+	efi_guid_t fs_proto = EFI_FILE_SYSTEM_GUID;
+	efi_status_t status;
+	void *handle = (void *)(unsigned long)image->device_handle;
+
+	status = sys_table_arg->boottime->handle_protocol(handle,
+				 &fs_proto, (void **)&io);
+	if (status != EFI_SUCCESS) {
+		efi_printk(sys_table_arg, "Failed to handle fs_proto\n");
+		return status;
+	}
+
+	status = io->open_volume(io, &fh);
+	if (status != EFI_SUCCESS)
+		efi_printk(sys_table_arg, "Failed to open volume\n");
+
+	*__fh = fh;
+	return status;
+}
+static efi_status_t efi_file_close(void *handle)
+{
+	efi_file_handle_t *fh = handle;
+
+	return fh->close(handle);
+}
+
+static efi_status_t
+efi_file_read(void *handle, unsigned long *size, void *addr)
+{
+	efi_file_handle_t *fh = handle;
+
+	return fh->read(handle, size, addr);
+}
+
+
+static efi_status_t
+efi_file_size(efi_system_table_t *sys_table_arg, void *__fh,
+	      efi_char16_t *filename_16, void **handle, u64 *file_sz)
+{
+	efi_file_handle_t *h, *fh = __fh;
+	efi_file_info_t *info;
+	efi_status_t status;
+	efi_guid_t info_guid = EFI_FILE_INFO_ID;
+	unsigned long info_sz;
+
+	status = fh->open(fh, &h, filename_16, EFI_FILE_MODE_READ, (u64)0);
+	if (status != EFI_SUCCESS) {
+		efi_printk(sys_table_arg, "Failed to open file: ");
+		efi_char16_printk(sys_table_arg, filename_16);
+		efi_printk(sys_table_arg, "\n");
+		return status;
+	}
+
+	*handle = h;
+
+	info_sz = 0;
+	status = h->get_info(h, &info_guid, &info_sz, NULL);
+	if (status != EFI_BUFFER_TOO_SMALL) {
+		efi_printk(sys_table_arg, "Failed to get file info size\n");
+		return status;
+	}
+
+grow:
+	status = sys_table_arg->boottime->allocate_pool(EFI_LOADER_DATA,
+				 info_sz, (void **)&info);
+	if (status != EFI_SUCCESS) {
+		efi_printk(sys_table_arg, "Failed to alloc mem for file info\n");
+		return status;
+	}
+
+	status = h->get_info(h, &info_guid, &info_sz,
+						   info);
+	if (status == EFI_BUFFER_TOO_SMALL) {
+		sys_table_arg->boottime->free_pool(info);
+		goto grow;
+	}
+
+	*file_sz = info->file_size;
+	sys_table_arg->boottime->free_pool(info);
+
+	if (status != EFI_SUCCESS)
+		efi_printk(sys_table_arg, "Failed to get initrd info\n");
+
+	return status;
+}
+
+
+
+static void efi_char16_printk(efi_system_table_t *sys_table_arg,
+			      efi_char16_t *str)
+{
+	struct efi_simple_text_output_protocol *out;
+
+	out = (struct efi_simple_text_output_protocol *)sys_table_arg->con_out;
+	out->output_string(out, str);
+}
+
+
+/*
+ * This function handles the architcture specific differences between arm and
+ * arm64 regarding where the kernel image must be loaded and any memory that
+ * must be reserved. On failure it is required to free all
+ * all allocations it has made.
+ */
+static efi_status_t handle_kernel_image(efi_system_table_t *sys_table,
+					unsigned long *image_addr,
+					unsigned long *image_size,
+					unsigned long *reserve_addr,
+					unsigned long *reserve_size,
+					unsigned long dram_base,
+					efi_loaded_image_t *image);
+/*
+ * EFI entry point for the arm/arm64 EFI stubs.  This is the entrypoint
+ * that is described in the PE/COFF header.  Most of the code is the same
+ * for both archictectures, with the arch-specific code provided in the
+ * handle_kernel_image() function.
+ */
+unsigned long __init efi_entry(void *handle, efi_system_table_t *sys_table,
+			       unsigned long *image_addr)
+{
+	efi_loaded_image_t *image;
+	efi_status_t status;
+	unsigned long image_size = 0;
+	unsigned long dram_base;
+	/* addr/point and size pairs for memory management*/
+	unsigned long initrd_addr;
+	u64 initrd_size = 0;
+	unsigned long fdt_addr;  /* Original DTB */
+	u64 fdt_size = 0;  /* We don't get size from configuration table */
+	char *cmdline_ptr = NULL;
+	int cmdline_size = 0;
+	unsigned long new_fdt_addr;
+	efi_guid_t loaded_image_proto = LOADED_IMAGE_PROTOCOL_GUID;
+	unsigned long reserve_addr = 0;
+	unsigned long reserve_size = 0;
+
+	/* Check if we were booted by the EFI firmware */
+	if (sys_table->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE)
+		goto fail;
+
+	pr_efi(sys_table, "Booting Linux Kernel...\n");
+
+	/*
+	 * Get a handle to the loaded image protocol.  This is used to get
+	 * information about the running image, such as size and the command
+	 * line.
+	 */
+	status = sys_table->boottime->handle_protocol(handle,
+					&loaded_image_proto, (void *)&image);
+	if (status != EFI_SUCCESS) {
+		pr_efi_err(sys_table, "Failed to get loaded image protocol\n");
+		goto fail;
+	}
+
+	dram_base = get_dram_base(sys_table);
+	if (dram_base == EFI_ERROR) {
+		pr_efi_err(sys_table, "Failed to find DRAM base\n");
+		goto fail;
+	}
+	status = handle_kernel_image(sys_table, image_addr, &image_size,
+				     &reserve_addr,
+				     &reserve_size,
+				     dram_base, image);
+	if (status != EFI_SUCCESS) {
+		pr_efi_err(sys_table, "Failed to relocate kernel\n");
+		goto fail;
+	}
+
+	/*
+	 * Get the command line from EFI, using the LOADED_IMAGE
+	 * protocol. We are going to copy the command line into the
+	 * device tree, so this can be allocated anywhere.
+	 */
+	cmdline_ptr = efi_convert_cmdline(sys_table, image, &cmdline_size);
+	if (!cmdline_ptr) {
+		pr_efi_err(sys_table, "getting command line via LOADED_IMAGE_PROTOCOL\n");
+		goto fail_free_image;
+	}
+
+	/* Load a device tree from the configuration table, if present. */
+	fdt_addr = (uintptr_t)get_fdt(sys_table);
+	if (!fdt_addr) {
+		status = handle_cmdline_files(sys_table, image, cmdline_ptr,
+					      "dtb=",
+					      ~0UL, (unsigned long *)&fdt_addr,
+					      (unsigned long *)&fdt_size);
+
+		if (status != EFI_SUCCESS) {
+			pr_efi_err(sys_table, "Failed to load device tree!\n");
+			goto fail_free_cmdline;
+		}
+	}
+
+	status = handle_cmdline_files(sys_table, image, cmdline_ptr,
+				      "initrd=", dram_base + SZ_512M,
+				      (unsigned long *)&initrd_addr,
+				      (unsigned long *)&initrd_size);
+	if (status != EFI_SUCCESS)
+		pr_efi_err(sys_table, "Failed initrd from command line!\n");
+
+	new_fdt_addr = fdt_addr;
+	status = allocate_new_fdt_and_exit_boot(sys_table, handle,
+				&new_fdt_addr, dram_base + MAX_FDT_OFFSET,
+				initrd_addr, initrd_size, cmdline_ptr,
+				fdt_addr, fdt_size);
+
+	/*
+	 * If all went well, we need to return the FDT address to the
+	 * calling function so it can be passed to kernel as part of
+	 * the kernel boot protocol.
+	 */
+	if (status == EFI_SUCCESS)
+		return new_fdt_addr;
+
+	pr_efi_err(sys_table, "Failed to update FDT and exit boot services\n");
+
+	efi_free(sys_table, initrd_size, initrd_addr);
+	efi_free(sys_table, fdt_size, fdt_addr);
+
+fail_free_cmdline:
+	efi_free(sys_table, cmdline_size, (unsigned long)cmdline_ptr);
+
+fail_free_image:
+	efi_free(sys_table, image_size, *image_addr);
+	efi_free(sys_table, reserve_size, reserve_addr);
+fail:
+	return EFI_ERROR;
+}
-- 
1.7.10.4




More information about the linux-arm-kernel mailing list