[PATCH v2 05/18] ARM: mvebu: Add Device Tree description of xHCI hosts on Armada 38x

Andrew Lunn andrew at lunn.ch
Fri Apr 25 08:53:40 PDT 2014


On Fri, Apr 25, 2014 at 04:07:03PM +0200, Gregory CLEMENT wrote:
> The Marvell Armada 38x SoCs contain two xHCI host. This commit adds
> the Device Tree description of those interfaces at the SoC level, and
> also enables the two USB3 ports on the Armada 385 DB platform and one
> USB3 port on the Armada 385 RD platforms.
> 
> Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
> ---
>  arch/arm/boot/dts/armada-385-db.dts |  8 ++++++++
>  arch/arm/boot/dts/armada-385-rd.dts |  4 ++++
>  arch/arm/boot/dts/armada-38x.dtsi   | 17 +++++++++++++++++
>  3 files changed, 29 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts
> index 6828d77696a6..d5db1466da82 100644
> --- a/arch/arm/boot/dts/armada-385-db.dts
> +++ b/arch/arm/boot/dts/armada-385-db.dts
> @@ -101,6 +101,14 @@
>  					reg = <0x1000000 0x3f000000>;
>  				};
>  			};
> +
> +			usb3 at f0000 {
> +				status = "okay";
> +			};
> +
> +			usb3 at f8000 {
> +				status = "okay";
> +			};
>  		};
>  
>  		pcie-controller {
> diff --git a/arch/arm/boot/dts/armada-385-rd.dts b/arch/arm/boot/dts/armada-385-rd.dts
> index 45250c88814b..a505fe94ff37 100644
> --- a/arch/arm/boot/dts/armada-385-rd.dts
> +++ b/arch/arm/boot/dts/armada-385-rd.dts
> @@ -77,6 +77,10 @@
>  					reg = <1>;
>  				};
>  			};
> +
> +			usb3 at f0000 {
> +				status = "okay";
> +			};
>  		};
>  
>  		pcie-controller {
> diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
> index a064f59da02d..5913ce1cc601 100644
> --- a/arch/arm/boot/dts/armada-38x.dtsi
> +++ b/arch/arm/boot/dts/armada-38x.dtsi
> @@ -355,6 +355,23 @@
>  				clocks = <&coredivclk 0>;
>  				status = "disabled";
>  			};
> +
> +			usb3 at f0000 {
> +				compatible = "marvell,armada-380-xhci";
> +				reg = <0xf0000 0x3fff>,<0xf4000 0x3fff>;

s/0x3fff/0x4000/g  ?

	Andrew		   

> +				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&gateclk 9>;
> +				status = "disabled";
> +			};
> +
> +			usb3 at f8000 {
> +				compatible = "marvell,armada-380-xhci";
> +				reg = <0xf8000 0x3fff>,<0xfc000 0x3fff>;
> +				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&gateclk 10>;
> +				status = "disabled";
> +			};
> +
>  		};
>  	};
>  
> -- 
> 1.8.1.2
> 



More information about the linux-arm-kernel mailing list