[PATCH] ARM: dts: disable MDMA1 node for smdk5420 board

[Tushar Behera]

On 22 April 2014 07:48, Kukjin Kim <kgene.kim at samsung.com> wrote:
> Seungwon Jeon wrote:
>>
>
> + Javi Merino and Tushar Behera
>
>> This change is similar to commit 3da355c(ARM: dts: Disable MDMA1 node
>> for arndale-octa board). If MDMA1 region is configured with secure mode,
>> it makes the boot failure with the following.
>>
>> Unhandled fault: imprecise external abort (0x1406) at 0x00000000
>>
> If so, how about adding the 'disabled' status in 5420 dtsi file? Then if 'enabling' is required, we can enable in each board dt file...
>

That should be okay. While at it, we can remove the node disabling
code from Arndale-Octa board DTS file.


> - Kukjin
>
>> Signed-off-by: Seungwon Jeon <tgih.jun at samsung.com>
>> ---
>>  arch/arm/boot/dts/exynos5420-smdk5420.dts |    6 ++++++
>>  1 files changed, 6 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> b/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> index 6910485..9a48e3f 100644
>> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> @@ -373,4 +373,10 @@
>>                       };
>>               };
>>       };
>> +
>> +     amba {
>> +             mdma1: mdma at 11C10000 {
>> +                     status = "disabled";
>> +             };
>> +     };
>>  };
>> --
>> 1.7.0.4
>



-- 
Tushar Behera