[PATCH] arm: edma: Fix xbar mapping

Thomas Gleixner tglx at linutronix.de
Sun Apr 13 13:48:48 PDT 2014


Subject: arm: edma: Fix xbar mapping
From: Thomas Gleixner <tglx at linutronix.de>
Date: Sun, 13 Apr 2014 20:44:46 +0200

This is another great example of trainwreck engineering:

commit 2646a0e529 (ARM: edma: Add EDMA crossbar event mux support)
added support for using EDMA on peripherals which have no direct EDMA
event mapping.

The code compiles and does not explode in your face, but that's it.

1) Reading an u16 array from an u32 device tree array simply does not
   work. Even if the function is named "edma_of_read_u32_to_s16_array".

   It merily calls of_property_read_u16_array. So the resulting 16bit
   array will have every other entry = 0.

2) The DT entry for the xbar registers related to xbar has length 0x10
   instead of the real length: 0xfd0 - 0xf90 = 0x40.

   Not a real problem as it does not cross a page boundary, but
   wrong nevertheless.

3) But none of this matters as the mapping never happens:

   After reading nonsense edma_of_read_u32_to_s16_array() invalidates
   the first array entry pair, so nobody can ever notice the
   braindamage by immediate explosion.

Seems the QA criteria for this code was solely not to explode when
someone adds edma-xbar-event-map entries to the DT. Goal achieved,
congratulations!

Not really helpful if someone wants to use edma on a device which
requires a xbar mapping.

Fix the issues by:

- annotating the device tree entry with "/bits/ 16" as documented in
  the of_property_read_u16_array kernel doc

- make the size of the xbar register mapping correct

- invalidating the end of the array and not the start

This convoluted mess wants to be completely rewritten as there is no
point to keep the xbar_chan array memory and the iomapping of the xbar
regs around forever. Marking the xbar mapped channels as used should
be done right there.

But that's a different issue and this patch is small enough to make it
work and allows a simple backport for stable.

Signed-off-by: Thomas Gleixner <tglx at linutronix.de>
---
 Documentation/devicetree/bindings/dma/ti-edma.txt |    4 -
 arch/arm/boot/dts/am33xx.dtsi                     |    2 
 arch/arm/common/edma.c                            |   48 ++++++----------------
 3 files changed, 18 insertions(+), 36 deletions(-)

Index: linux-2.6/Documentation/devicetree/bindings/dma/ti-edma.txt
===================================================================
--- linux-2.6.orig/Documentation/devicetree/bindings/dma/ti-edma.txt
+++ linux-2.6/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -29,6 +29,6 @@ edma: edma at 49000000 {
 	dma-channels = <64>;
 	ti,edma-regions = <4>;
 	ti,edma-slots = <256>;
-	ti,edma-xbar-event-map = <1 12
-				  2 13>;
+	ti,edma-xbar-event-map = /bits/ 16 <1 12
+				  	    2 13>;
 };
Index: linux-2.6/arch/arm/boot/dts/am33xx.dtsi
===================================================================
--- linux-2.6.orig/arch/arm/boot/dts/am33xx.dtsi
+++ linux-2.6/arch/arm/boot/dts/am33xx.dtsi
@@ -144,7 +144,7 @@
 			compatible = "ti,edma3";
 			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
 			reg =	<0x49000000 0x10000>,
-				<0x44e10f90 0x10>;
+				<0x44e10f90 0x40>;
 			interrupts = <12 13 14>;
 			#dma-cells = <1>;
 			dma-channels = <64>;
Index: linux-2.6/arch/arm/common/edma.c
===================================================================
--- linux-2.6.orig/arch/arm/common/edma.c
+++ linux-2.6/arch/arm/common/edma.c
@@ -1423,55 +1423,38 @@ EXPORT_SYMBOL(edma_clear_event);
 
 #if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DMADEVICES)
 
-static int edma_of_read_u32_to_s16_array(const struct device_node *np,
-					 const char *propname, s16 *out_values,
-					 size_t sz)
+static int edma_xbar_event_map(struct device *dev, struct device_node *node,
+			       struct edma_soc_info *pdata, size_t sz)
 {
-	int ret;
-
-	ret = of_property_read_u16_array(np, propname, out_values, sz);
-	if (ret)
-		return ret;
-
-	/* Terminate it */
-	*out_values++ = -1;
-	*out_values++ = -1;
-
-	return 0;
-}
-
-static int edma_xbar_event_map(struct device *dev,
-			       struct device_node *node,
-			       struct edma_soc_info *pdata, int len)
-{
-	int ret, i;
+	const char pname[] = "ti,edma-xbar-event-map";
 	struct resource res;
 	void __iomem *xbar;
-	const s16 (*xbar_chans)[2];
+	s16 (*xbar_chans)[2];
+	size_t nelm = sz / sizeof(s16);
 	u32 shift, offset, mux;
+	int ret, i;
 
-	xbar_chans = devm_kzalloc(dev,
-				  len/sizeof(s16) + 2*sizeof(s16),
-				  GFP_KERNEL);
+	xbar_chans = devm_kzalloc(dev, (nelm + 2) * sizeof(s16), GFP_KERNEL);
 	if (!xbar_chans)
 		return -ENOMEM;
 
 	ret = of_address_to_resource(node, 1, &res);
 	if (ret)
-		return -EIO;
+		return -ENOMEM;
 
 	xbar = devm_ioremap(dev, res.start, resource_size(&res));
 	if (!xbar)
 		return -ENOMEM;
 
-	ret = edma_of_read_u32_to_s16_array(node,
-					    "ti,edma-xbar-event-map",
-					    (s16 *)xbar_chans,
-					    len/sizeof(u32));
+	ret = of_property_read_u16_array(node, pname, (u16 *)xbar_chans, nelm);
 	if (ret)
 		return -EIO;
 
-	for (i = 0; xbar_chans[i][0] != -1; i++) {
+	/* Invalidate last entry for the other user of this mess */
+	nelm >>= 1;
+	xbar_chans[nelm][0] = xbar_chans[nelm][1] = -1;
+
+	for (i = 0; i < nelm; i++) {
 		shift = (xbar_chans[i][1] & 0x03) << 3;
 		offset = xbar_chans[i][1] & 0xfffffffc;
 		mux = readl(xbar + offset);
@@ -1480,8 +1463,7 @@ static int edma_xbar_event_map(struct de
 		writel(mux, (xbar + offset));
 	}
 
-	pdata->xbar_chans = xbar_chans;
-
+	pdata->xbar_chans = (const s16 (*)[2]) xbar_chans;
 	return 0;
 }
 



More information about the linux-arm-kernel mailing list