[PATCH v3 2/2] dt: platform driver: Fill the resources before probe and defer if needed
Rob Herring
robherring2 at gmail.com
Fri Apr 11 10:28:52 PDT 2014
On Fri, Mar 21, 2014 at 9:46 AM, Jean-Jacques Hiblot
<jjhiblot at traphandler.com> wrote:
> The goal of this patch is to allow drivers to be probed even if at the time of
> the DT parsing some of their IRQ ressources are not available yet.
>
> In the current situation, the IRQ resources of a platform device are filled from
> the DT at the time the device is created (of_device_alloc()). The drawback of
> this is that a device sitting close to the top of the DT (ahb for example) but
> depending on ressources that are initialized later (IRQ domain dynamically
> created for example) will fail to probe because the ressources don't exist
> at this time.
s/ressources/resources/
>
> This patch fills the resource structure only before the device is probed and
> will defer the probe if the IRQ resource is not yet available.
>
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot at traphandler.com>
> ---
> drivers/base/platform.c | 5 ++
> drivers/of/platform.c | 114 ++++++++++++++++++++++++++++++++++----------
> include/linux/device.h | 1 +
> include/linux/of_platform.h | 10 ++++
> 4 files changed, 105 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/base/platform.c b/drivers/base/platform.c
> index bc78848..cee9b8d 100644
> --- a/drivers/base/platform.c
> +++ b/drivers/base/platform.c
> @@ -481,6 +481,10 @@ static int platform_drv_probe(struct device *_dev)
> struct platform_device *dev = to_platform_device(_dev);
> int ret;
>
> + ret = of_platform_device_prepare(dev);
> + if (ret)
> + goto error;
> +
> if (ACPI_HANDLE(_dev))
> acpi_dev_pm_attach(_dev, true);
>
> @@ -488,6 +492,7 @@ static int platform_drv_probe(struct device *_dev)
> if (ret && ACPI_HANDLE(_dev))
> acpi_dev_pm_detach(_dev, true);
>
> +error:
> if (drv->prevent_deferred_probe && ret == -EPROBE_DEFER) {
> dev_warn(_dev, "probe deferral not supported\n");
> ret = -ENXIO;
> diff --git a/drivers/of/platform.c b/drivers/of/platform.c
> index 404d1da..ba6be4a 100644
> --- a/drivers/of/platform.c
> +++ b/drivers/of/platform.c
> @@ -141,41 +141,17 @@ struct platform_device *of_device_alloc(struct device_node *np,
> struct device *parent)
> {
> struct platform_device *dev;
> - int rc, i, num_reg = 0, num_irq;
> - struct resource *res, temp_res;
>
> dev = platform_device_alloc("", -1);
> if (!dev)
> return NULL;
>
> - /* count the io and irq resources */
> - if (of_can_translate_address(np))
> - while (of_address_to_resource(np, num_reg, &temp_res) == 0)
> - num_reg++;
> - num_irq = of_irq_count(np);
> -
> - /* Populate the resource table */
> - if (num_irq || num_reg) {
> - res = kzalloc(sizeof(*res) * (num_irq + num_reg), GFP_KERNEL);
> - if (!res) {
> - platform_device_put(dev);
> - return NULL;
> - }
> -
> - dev->num_resources = num_reg + num_irq;
> - dev->resource = res;
> - for (i = 0; i < num_reg; i++, res++) {
> - rc = of_address_to_resource(np, i, res);
> - WARN_ON(rc);
> - }
> - WARN_ON(of_irq_to_resource_table(np, res, num_irq) != num_irq);
> - }
> -
> dev->dev.of_node = of_node_get(np);
> #if defined(CONFIG_MICROBLAZE)
> dev->dev.dma_mask = &dev->archdata.dma_mask;
> #endif
> dev->dev.parent = parent;
> + dev->dev.of_device = 1;
>
> if (bus_id)
> dev_set_name(&dev->dev, "%s", bus_id);
> @@ -233,6 +209,94 @@ static struct platform_device *of_platform_device_create_pdata(
> return dev;
> }
>
> +static int of_reg_count(struct device_node *np)
This belongs in of/address.c. It can be more efficiently written as:
int of_reg_count(struct device_node *dev)
{
const __be32 *prop;
unsigned int psize;
struct device_node *parent;
struct of_bus *bus;
int na, ns;
/* Get parent & match bus type */
parent = of_get_parent(dev);
if (!parent)
return 0;
bus = of_match_bus(parent);
bus->count_cells(dev, &na, &ns);
of_node_put(parent);
if (!OF_CHECK_COUNTS(na, ns))
return 0;
/* Get "reg" or "assigned-addresses" property */
prop = of_get_property(dev, bus->addresses, &psize);
if (!prop)
return 0;
psize /= 4;
return psize / (na + ns);
}
> +{
> + int nreg = 0;
> + if (of_can_translate_address(np)) {
> + struct resource temp_res;
> + while (of_address_to_resource(np, nreg, &temp_res) == 0)
> + nreg++;
> + }
> + return nreg;
> +}
> +
> +int of_platform_device_prepare(struct platform_device *dev)
> +{
> + struct device_node *np;
> + int i, irq_index;
> + struct resource *res;
> +
> + /*
> + * This function applies only devices described in the DT and
> + * created by of_device_alloc().
> + * Other platform devices have their ressources already populated.
> + */
> + np = dev->dev.of_node;
> + if (!np || !dev->dev.of_device)
> + return 0;
> +
> + /* Populate the resource table */
> + if (!dev->resource) {
> + int rc, nreg = 0, nirq;
> + /* count the io and irq resources */
> + nreg = of_reg_count(np);
> + nirq = of_irq_count(np);
I think of_irq_count should be changed to return errors from
of_irq_parse_one. It's complicated by the fact you want to distinguish
checking the index is too big versus all other errors.
> +
> + if (!nirq && !nreg)
> + return 0;
> +
> + res = kzalloc(sizeof(*res) * (nirq + nreg), GFP_KERNEL);
> + if (!res)
> + return -ENOMEM;
> +
> + dev->resource = res;
> + dev->num_resources = nreg + nirq;
> +
> + for (i = 0; i < nreg; i++, res++) {
> + rc = of_address_to_resource(np, i, res);
> + if (WARN_ON(rc)) {
> + /* THIS IS BAD; don't try to defer probing */
> + dev->num_resources = 0;
> + dev->resource = NULL;
> + kfree(res);
You are incrementing res, so this kfree is wrong. Using "res + i"
instead would work, but...
> + return rc;
> + }
> + }
> +
> + if (!rc && of_irq_to_resource_table(np, res, nirq) != nirq)
...then res needs to change here.
Doesn't this give a rc may not be initialized warning? You don't need
to check rc. You need to check !nirq instead.
> + /*
> + * Not all irqs can be translated. redo the irq
> + * resources to check if the probe can be deferred
> + */
> + goto redo_irq_resources;
> +
> + return 0;
But then, you don't really need any of this. You can just fall-thru
and the code below will work.
> + }
> +
> +redo_irq_resources:
> + /* See which IRQ resources need to be redone */
> + irq_index = 0;
> + for (i = 0, res = dev->resource; i < dev->num_resources; i++, res++) {
> + if (!res->flags) {
> + int rc;
> + /*
> + * If the IRQ can't be translated to a resource, check
> + * if its IRQ domain exists.
> + */
> + rc = of_irq_to_resource(np, irq_index, res);
> + if (!rc) {
> + if (of_find_irq_domain(np, irq_index) == NULL)
> + return -EPROBE_DEFER;
> + return rc;
> + }
I would move this check into of_irq_to_resource_table and also make it
skip entries with IORESOURCE_IRQ set. Then this can become:
for (i = 0, res = dev->resource; i < dev->num_resources; i++, res++) {
if (resource_type(res) != IORESOURCE_MEM)
break;
}
rc = of_irq_to_resource_table(np, res, dev->num_resources - i);
return (rc < 0) ? rc : 0;
Rob
More information about the linux-arm-kernel
mailing list