[PATCH 3/6] ARM: dts: zynq: drop address cells from GIC node

Lucas Stach l.stach at pengutronix.de
Fri Apr 11 07:59:37 PDT 2014


This is likely a copy-and-paste error from the
ARM GIC documentation, that has already been fixed.

address-cells should have been set to 0, as with the size
cells. As having those properties set to 0 is the
same thing as not specifying them, drop them completely.

Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
 arch/arm/boot/dts/zynq-7000.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 511180769af5..3f277c2bc19c 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -57,7 +57,6 @@
 		intc: interrupt-controller at f8f01000 {
 			compatible = "arm,cortex-a9-gic";
 			#interrupt-cells = <3>;
-			#address-cells = <1>;
 			interrupt-controller;
 			reg = <0xF8F01000 0x1000>,
 			      <0xF8F00100 0x100>;
-- 
1.9.1




More information about the linux-arm-kernel mailing list