[PATCH 7/8] ARM: dts: imx: add IMX50 SoC device tree bindings

[Sascha Hauer]

On Fri, Oct 18, 2013 at 04:04:19PM +1000, gerg at uclinux.org wrote:
> From: Greg Ungerer <gerg at uclinux.org>
> 
> Create device tree bindings for the Freescale IMX50 SoC. This was based on
> the IMX53 bindings with changes made as necessary.
> 
> Signed-off-by: Greg Ungerer <gerg at uclinux.org>
> ---
> +
> +			iomuxc: iomuxc at 53fa8000 {
> +				compatible = "fsl,imx50-iomuxc";
> +				reg = <0x53fa8000 0x4000>;
> +
> +				fec {
> +					pinctrl_fec_1: fecgrp-1 {
> +						fsl,pins = <
> +							MX50_PAD_SSI_RXFS__FEC_MDC	0x80
> +							MX50_PAD_SSI_RXC__FEC_MDIO	0x80
> +							MX50_PAD_DISP_D0__FEC_TX_CLK	0x80
> +							MX50_PAD_DISP_D1__FEC_RX_ERR	0x80
> +							MX50_PAD_DISP_D2__FEC_RX_DV	0x80
> +							MX50_PAD_DISP_D3__FEC_RDATA_1	0x80
> +							MX50_PAD_DISP_D4__FEC_RDATA_0	0x80
> +							MX50_PAD_DISP_D5__FEC_TX_EN	0x80
> +							MX50_PAD_DISP_D6__FEC_TDATA_1	0x80
> +							MX50_PAD_DISP_D7__FEC_TDATA_0	0x80
> +						>;
> +					};
> +

Shawn recently removed the pinctrl groups here and referenced to this
node by doing

&iomuxc {
	fec {
		...
	};
};

> +				cspi {
> +					pinctrl_cspi_1: cspigrp-1 {
> +						fsl,pins = <
> +							MX50_PAD_CSPI_SCLK__CSPI_SCLK	0

0 is definitely wrong here. We have 0x80000000 for "Don't touch
padctrl", but otherwise this should contain some real padctrl settings.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |