[PATCH 09/12] usb: phy-mxs: update binding for adding anatop phandle

[Shawn Guo]

On Sat, Oct 12, 2013 at 05:09:43PM +0800, Peter Chen wrote:
> Add anatop phandle which is used to access anatop registers to
> control PHY's power and other USB operations.
> 
> Signed-off-by: Peter Chen <peter.chen at freescale.com>
> ---
>  Documentation/devicetree/bindings/usb/mxs-phy.txt |    2 ++
>  1 files changed, 2 insertions(+), 0 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt
> index 5835b27..1a9bd85 100644
> --- a/Documentation/devicetree/bindings/usb/mxs-phy.txt
> +++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt
> @@ -4,10 +4,12 @@ Required properties:
>  - compatible: Should be "fsl,imx23-usbphy"
>  - reg: Should contain registers location and length
>  - interrupts: Should contain phy interrupt
> +- fsl,anatop: phandle for anatop register

It's only required for imx6 phy not necessarily for imx23/28 phy, right?

Shawn

>  
>  Example:
>  usbphy1: usbphy at 020c9000 {
>  	compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
>  	reg = <0x020c9000 0x1000>;
>  	interrupts = <0 44 0x04>;
> +	fsl,anatop = <&anatop>;
>  };
> -- 
> 1.7.1
> 
>