[PATCH stable] ARM: tegra: unify Tegra's Kconfig a bit more

Stephen Warren swarren at wwwdotorg.org
Fri Oct 4 16:10:11 EDT 2013


From: Stephen Warren <swarren at nvidia.com>

Move all common select clauses from ARCH_TEGRA_*_SOC to ARCH_TEGRA to
eliminate duplication. The USB-related selects all should have been
common too, but were missing from Tegra114 previously. Move these to
ARCH_TEGRA too. The latter fixes a build break when only Tegra114
support was enabled, but not Tegra20 or Tegra30 support.

This is 20984c44b5a08620778ea14fa5807489170fd5ca in v3.12-rc1.

Signed-off-by: Stephen Warren <swarren at nvidia.com>
Reported-by: Paul Walmsley <pwalmsley at nvidia.com>
[auto-builders for 3.11.x are failing due to this]
Cc: stable # v3.11
---
 arch/arm/mach-tegra/Kconfig | 21 ++++++---------------
 1 file changed, 6 insertions(+), 15 deletions(-)

diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index add345e..e963db2 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -2,18 +2,24 @@ config ARCH_TEGRA
 	bool "NVIDIA Tegra" if ARCH_MULTI_V7
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
+	select ARM_GIC
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select CLKSRC_OF
 	select COMMON_CLK
+	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if LOCAL_TIMERS
 	select HAVE_CLK
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
+	select PINCTRL
 	select SOC_BUS
 	select SPARSE_IRQ
+	select USB_ARCH_HAS_EHCI if USB_SUPPORT
+	select USB_ULPI if USB_PHY
+	select USB_ULPI_VIEWPORT if USB_PHY
 	select USE_OF
 	help
 	  This enables support for NVIDIA Tegra based systems.
@@ -27,15 +33,9 @@ config ARCH_TEGRA_2x_SOC
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_754327 if SMP
 	select ARM_ERRATA_764369 if SMP
-	select ARM_GIC
-	select CPU_V7
-	select PINCTRL
 	select PINCTRL_TEGRA20
 	select PL310_ERRATA_727915 if CACHE_L2X0
 	select PL310_ERRATA_769419 if CACHE_L2X0
-	select USB_ARCH_HAS_EHCI if USB_SUPPORT
-	select USB_ULPI if USB_PHY
-	select USB_ULPI_VIEWPORT if USB_PHY
 	help
 	  Support for NVIDIA Tegra AP20 and T20 processors, based on the
 	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
@@ -44,14 +44,8 @@ config ARCH_TEGRA_3x_SOC
 	bool "Enable support for Tegra30 family"
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
-	select ARM_GIC
-	select CPU_V7
-	select PINCTRL
 	select PINCTRL_TEGRA30
 	select PL310_ERRATA_769419 if CACHE_L2X0
-	select USB_ARCH_HAS_EHCI if USB_SUPPORT
-	select USB_ULPI if USB_PHY
-	select USB_ULPI_VIEWPORT if USB_PHY
 	help
 	  Support for NVIDIA Tegra T30 processor family, based on the
 	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
@@ -60,10 +54,7 @@ config ARCH_TEGRA_114_SOC
 	bool "Enable support for Tegra114 family"
 	select HAVE_ARM_ARCH_TIMER
 	select ARM_ERRATA_798181
-	select ARM_GIC
 	select ARM_L1_CACHE_SHIFT_6
-	select CPU_V7
-	select PINCTRL
 	select PINCTRL_TEGRA114
 	help
 	  Support for NVIDIA Tegra T114 processor family, based on the
-- 
1.8.1.5




More information about the linux-arm-kernel mailing list