[PATCH v2] ARM: pxa: Move iotable mapping inside vmalloc region

David Heidelberger david.heidelberger at ixit.cz
Fri Nov 29 13:26:02 EST 2013


Build fails with this patch with:
arch/arm/mach-pxa/standby.S:25: Error: missing ')'
arch/arm/mach-pxa/standby.S:25: Error: garbage following instruction -- 
`mov r3,#(0xff000000UL-0x00100000)'

After replace VMALLOC_END to 0xff000000 (without UL) it fails with:

arch/arm/mach-pxa/sleep.S:52: Error: invalid constant (fffffffffef00000) 
after fixup

it will probably fail everywhere in asm code, where is declared 
UNCACHED_PHYS_0

Thank you,
David

Dne 2013-11-29 01:00, Ezequiel Garcia napsal:
> In order to remove the following ugly message:
> 
>   BUG: mapping for 0x00000000 at 0xff000000 out of vmalloc space
> 
> the iotable mappings should be re-located inside the vmalloc
> region. Such move was introduced at commit:
> 
> commit 0536bdf33faff4d940ac094c77998cfac368cfff
> Author: Nicolas Pitre <nicolas.pitre at linaro.org>
> Date:   Thu Aug 25 00:35:59 2011 -0400
> 
>     ARM: move iotable mappings within the vmalloc region
> 
> While at it, condition the mapping to PXA25x and PXA27x, which
> are the only platforms where it's used.
> 
> Cc: Nicolas Pitre <nicolas.pitre at linaro.org>
> Cc: Russell King - ARM Linux <linux at arm.linux.org.uk>
> Cc: David Heidelberger <david.heidelberger at ixit.cz>
> Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
> ---
> David,
> 
> Is it possible for you to give this a try on your board?
> 
>  arch/arm/mach-pxa/generic.c               | 6 ++++--
>  arch/arm/mach-pxa/include/mach/hardware.h | 5 +++--
>  2 files changed, 7 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
> index 4225417..3c1b4fa 100644
> --- a/arch/arm/mach-pxa/generic.c
> +++ b/arch/arm/mach-pxa/generic.c
> @@ -83,11 +83,13 @@ static struct map_desc common_io_desc[] __initdata 
> = {
>  		.pfn		= __phys_to_pfn(0x40000000),
>  		.length		= 0x02000000,
>  		.type		= MT_DEVICE
> +#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
>  	}, {	/* UNCACHED_PHYS_0 */
> -		.virtual	= 0xff000000,
> +		.virtual	= UNCACHED_PHYS_0,
>  		.pfn		= __phys_to_pfn(0x00000000),
> -		.length		= 0x00100000,
> +		.length		= UNCACHED_SIZE,
>  		.type		= MT_DEVICE
> +#endif
>  	}
>  };
> 
> diff --git a/arch/arm/mach-pxa/include/mach/hardware.h
> b/arch/arm/mach-pxa/include/mach/hardware.h
> index ccb06e4..b365a72 100644
> --- a/arch/arm/mach-pxa/include/mach/hardware.h
> +++ b/arch/arm/mach-pxa/include/mach/hardware.h
> @@ -14,13 +14,14 @@
>  #define __ASM_ARCH_HARDWARE_H
> 
>  #include <mach/addr-map.h>
> +#include <asm/pgtable.h>
> 
>  /*
>   * Workarounds for at least 2 errata so far require this.
>   * The mapping is set in mach-pxa/generic.c.
>   */
> -#define UNCACHED_PHYS_0		0xff000000
> -#define UNCACHED_ADDR		UNCACHED_PHYS_0
> +#define UNCACHED_PHYS_0		(VMALLOC_END - UNCACHED_SIZE)
> +#define UNCACHED_SIZE		SZ_1M
> 
>  /*
>   * Intel PXA2xx internal register mapping:



More information about the linux-arm-kernel mailing list