[PATCH v3 0/2] watchdog: bcm281xx: Watchdog Driver

Markus Mayer markus.mayer at linaro.org
Mon Nov 18 20:24:08 EST 2013


This is version 3 of the watchdog driver for the BCM281xx family of mobile
SoCs.

Changes since version 2:

- BCM_KONA_WDT_NAME: "bcm-kona-wdt" -> "bcm_kona_wdt"
- Don't initialize static variable
- Remove '{'/'}' from single-line statements
- busy_count retains the maximum loop count of the longest loop rather
  than an over-all maximum
- Use seq_puts() in lieu of seq_printf() in 2 locations
- Removed error message after devm_kzalloc()
- Added MODULE_ALIAS

Changes since version 1:

- Added module name to "help" section in Kconfig A few cosmetic code
- simplifications and fixes Removed most dev_info() calls and changed the
- remaining ones to dev_dbg() Renamed SECWDOG_WD_LOAD_FLAG_MASK to
- SECWDOG_WD_LOAD_FLAG Added some comments to secure_register_read() and
- struct bcm_kona_wdt Added delay to secure_register_read() Reduced maximum
- retry loop from 10000 to 1000 Introduced "busy_count" variable to count
- how often secure_register_read() gets stalled; this is available through
- debugfs Simplified secure_register_read() to return -ETIMEDOUT rather than
- using a variable parameter to indicate a timeout error Got rid of all uses
- of -EAGAIN Fixed return value check for debugfs_create_dir() Simplified
- bcm_kona_wdt_debugfs_init() by getting rid of goto Created new generic
- function bcm_kona_wdt_ctrl_reg_modify() The following functions now use
- bcm_kona_wdt_ctrl_reg_modify():
    - bcm_kona_wdt_set_resolution_reg() bcm_kona_wdt_set_timeout_reg()
    - bcm_kona_wdt_stop()
- Made bcm_kona_wdt_set_timeout_reg() more generic, so bcm_kona_wdt_start()
  can use it Removed MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR)




Markus Mayer (2):
  watchdog: bcm281xx: Watchdog Driver
  ARM: bcm281xx: watchdog configuration

 arch/arm/configs/bcm_defconfig  |    3 +
 drivers/watchdog/Kconfig        |   22 +++
 drivers/watchdog/Makefile       |    1 +
 drivers/watchdog/bcm_kona_wdt.c |  366 +++++++++++++++++++++++++++++++++++++++
 4 files changed, 392 insertions(+)
 create mode 100644 drivers/watchdog/bcm_kona_wdt.c

-- 
1.7.9.5





More information about the linux-arm-kernel mailing list