[PATCH 12/12] arm: dts: keystone: add AEMIF/NAND device entry

Santosh Shilimkar santosh.shilimkar at ti.com
Tue Nov 12 11:19:55 EST 2013


On Monday 11 November 2013 12:13 PM, Khoronzhuk, Ivan wrote:
> Add AEMIF/NAND device entry.
> 
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk at ti.com>
> ---
>  arch/arm/boot/dts/keystone.dts |   63 ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 63 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/keystone.dts b/arch/arm/boot/dts/keystone.dts
> index 100bdf5..998da98 100644
> --- a/arch/arm/boot/dts/keystone.dts
> +++ b/arch/arm/boot/dts/keystone.dts
> @@ -179,5 +179,68 @@
>                         interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>;
>                         clocks = <&clkspi>;
>                 };
> +
> +               aemif at 021000A00 {
> +                       compatible = "ti,keystone-aemif";
> +                       #address-cells = <2>;
> +                       #size-cells = <1>;
> +                       clocks = <&clkaemif>;
> +                       clock-names = "aemif";
> +                       clock-ranges;
> +
> +                       reg = <0x2100A00 0x00000100>;
> +                       ranges = <0 0 0x30000000 0x10000000
> +                                 1 0 0x21000A00 0x00000100>;
> +
> +                       nand:cs0 {
> +                               compatible = "ti,davinci-cs";
> +                               #address-cells = <2>;
> +                               #size-cells = <1>;
> +                               clock-ranges;
> +                               ranges;
> +
> +                               /* all timings in nanoseconds */
> +                               ti,davinci-cs-ta = <12>;
> +                               ti,davinci-cs-rhold = <6>;
> +                               ti,davinci-cs-rstrobe = <23>;
> +                               ti,davinci-cs-rsetup = <9>;
> +                               ti,davinci-cs-whold = <8>;
> +                               ti,davinci-cs-wstrobe = <23>;
> +                               ti,davinci-cs-wsetup = <8>;
> +
> +                               nand at 0,0 {
> +                                       compatible = "ti,keystone-nand";
> +                                       #address-cells = <1>;
> +                                       #size-cells = <1>;
> +                                       reg = <0 0 0x4000000
> +                                              1 0 0x0000100>;
> +
> +                                       ti,davinci-chipselect = <0>;
> +                                       ti,davinci-mask-ale = <0x2000>;
> +                                       ti,davinci-mask-cle = <0x4000>;
> +                                       ti,davinci-mask-chipsel = <0>;
> +                                       nand-ecc-mode = "hw";
> +                                       ti,davinci-ecc-bits = <4>;
> +                                       nand-on-flash-bbt;
> +
> +                                       partition at 0 {
> +                                               label = "u-boot";
> +                                               reg = <0x0 0x100000>;
> +                                               read-only;
> +                                       };
> +
> +                                       partition at 100000 {
> +                                               label = "params";
> +                                               reg = <0x100000 0x80000>;
> +                                               read-only;
> +                                       };
> +
> +                                       partition at 180000 {
> +                                               label = "ubifs";
> +                                               reg = <0x180000 0x7E80000>;
> +                                       };
Lets create now board specific k2hk-evm.dts and rename keystone.dts
to keystone.dtsi and include that in boards. That way you can add the
board specific stuff in board files and common soc stuff in keystone.dtsi.

You can update that once the bindings are blessed by DT folks.

Regards,
Santosh




More information about the linux-arm-kernel mailing list