[PATCH v3 4/6] edac: Document Krait L1/L2 EDAC driver binding

[Stephen Boyd]

The Krait L1/L2 error reporting device is made up of two
interrupts, one per-CPU interrupt for the L1 caches and one
interrupt for the L2 cache.

Cc: Mark Rutland <mark.rutland at arm.com>
Acked-by: Kumar Gala <galak at codeaurora.org>
Cc: <devicetree at vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd at codeaurora.org>
---
 Documentation/devicetree/bindings/arm/cpus.txt | 49 ++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index f32494d..c30d547 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -44,6 +44,8 @@ For the ARM architecture every CPU node must contain the following properties:
 		"marvell,mohawk"
 		"marvell,xsc3"
 		"marvell,xscale"
+		"qcom,scorpion"
+		"qcom,krait"
 
 Example:
 
@@ -75,3 +77,50 @@ Example:
 			reg = <0x101>;
 		};
 	};
+
+If the compatible string contains "qcom,krait" there shall be an interrupts
+property containing the L1/CPU error interrupt number. There shall also be a
+l2-cache node containing the following properties:
+
+ - compatible: Shall contain at least "cache"
+ - cache-level: Must be 2
+ - interrupts: Shall contain the L2 error interrupt
+
+Example:
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <1 9 0xf04>;
+		compatible = "qcom,krait";
+
+		cpu at 0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu at 1 {
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu at 2 {
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu at 3 {
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			interrupts = <0 2 0x4>;
+		};
+	};
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation