[PATCH] ARM: EXYNOS: Update defconfig for Arndale and Origen board

Tushar Behera tushar.behera at linaro.org
Wed May 29 04:50:53 EDT 2013


On 05/29/2013 11:01 AM, Olof Johansson wrote:
> On Tue, May 28, 2013 at 8:59 PM, Tushar Behera <tushar.behera at linaro.org> wrote:
> 
>> The patches are at [1].
> 
> FWIW, a cgit/gitweb link is easier to follow when you're reading an
> email. Anyway, found the patches.
> 
>> There are a total of 6 patches on top of
>> v3.10-rc3. 3 of them (a, b, d) are queued for 3.10-rc4 and another patch
>> (c) is just a defconfig hack to get Arndale booting. Remaining 2 patches
>> (e, f) are required to reset the hub during EHCI initialization.
> 
> Huh, I thought you said that (c) wasn't needed when I posted the
> defconfig update. It'd be nice to see the code fixed to handle this
> case instead of Linaro carrying a patch like this though. I.e. make it
> able to deselect the uart, or make it tied to DEBUG_LL like on other
> platforms instead of having a separate config for this.
> 

It would be good to free up the dependency on the correct UART port for
the board to boot. Without that, there would always be boards that don't
boot with default mainline defconfig file even though all other
components are in place.

>> a. ARM: exynos: defconfig update
>> b. ARM: EXYNOS: Update defconfig for Arndale and Origen board
>> c. [TEMP] ARM: EXYNOS: Set low-level UART port to 2
>> d. ARM: dts: Enabling samsung-usb2phy driver for exynos5250
>> e. usb: ehci-s5p: add the HSIC port initialization
>> f. ARM: dts: Add USB gpio entries for Arndale board
>>
>> I am not sure whether such kind of board-specific patches (e, f) are
>> appreciated in the drivers. But that is all we need to get USB and
>> Ethernet to work on v3.10-rc3 kernel.
> 
> I've come across a similar situation with wifi reset sequence on the
> chromebook. On the product kernel we added some code to the board file
> to deal with it, but if we keep doing that things will grow out of
> hand.
> 
> I don't know if it'll be unpopular, but I think it's time to start a
> drivers/platform/arm for these kind of things, and have those drivers
> probe on the system compatible value, similar to how x86 does it (with
> DMI tables). At least that's my plan for approaching the wifi
> reset/power-on sequence on the Chromebook. I hope to have patches in
> not all that long...
> 
> Likewise, the hub reset/enable code doesn't have to go with the USB
> driver, right? I.e. if you cycle reset/enable on the hub after the
> host and phy is configured, you'll still have a working setup?
> 

Right, hub reset/enable code need not be tied up with USB driver. As per
your suggestion regarding drivers/platform/arm, I implemented an Arndale
specific driver [2] in drivers/platform/arm and verified USB and
ethernet to be working.

[2]
https://git.linaro.org/gitweb?p=landing-teams/working/samsung/kernel.git;a=shortlog;h=refs/heads/upstream/arndale-usb-2

> 
> -Olof
> 


-- 
Tushar Behera



More information about the linux-arm-kernel mailing list