[PATCH 0/6] ARM: tegra114: add CPU hotplug support

[Joseph Lo]

Tegra 114 is different with other Tegra SoC chips. It using ARM Cortex-A15
as CPU core and a enhanced flow controller for CPU power control. So
we need to skip some code that was for Contex-A9 and some other support
code that was for other Tegra SoC chips. Then adding the proper power up
and hot plug control for Tegra114.

Joseph Lo (6):
  ARM: tegra: add an assembly marco to check Tegra SoC ID
  ARM: tegra: skip SCU and PL310 code when CPU is not Cortex-A9
  ARM: tegra: make tegra_resume can work for Tegra114
  ARM: tegra114: add power up sequence for warm boot CPU
  clk: tegra114: implement wait_for_reset and disable_clock for
    tegra_cpu_car_ops
  ARM: tegra114: add CPU hotplug support

 arch/arm/mach-tegra/Makefile        |  1 +
 arch/arm/mach-tegra/flowctrl.h      |  1 +
 arch/arm/mach-tegra/fuse.h          | 22 +++++++++---------
 arch/arm/mach-tegra/hotplug.c       |  2 ++
 arch/arm/mach-tegra/platsmp.c       | 25 ++++++++++++++++++++-
 arch/arm/mach-tegra/reset-handler.S | 45 ++++++++++++++++++++-----------------
 arch/arm/mach-tegra/sleep-tegra30.S | 27 ++++++++++++++++++----
 arch/arm/mach-tegra/sleep.S         |  8 ++++---
 arch/arm/mach-tegra/sleep.h         | 35 ++++++++++++++++++++++++-----
 drivers/clk/tegra/clk-tegra114.c    | 23 ++++++++++++++++++-
 10 files changed, 143 insertions(+), 46 deletions(-)

-- 
1.8.2.2