[PATCH V5 7/9] ARM: vt8500: Provide regulator to pwm-backlight

Andrew Chew achew at nvidia.com
Mon Mar 25 21:21:51 EDT 2013


The pwm-backlight driver now takes a mandatory regulator that is gotten
during driver probe.  Initialize a dummy regulator to satisfy this
requirement.

Signed-off-by: Andrew Chew <achew at nvidia.com>
Acked-by: Alexandre Courbot <acourbot at nvidia.com>
Acked-by: Tony Prisk <linux at prisktech.co.nz>
---
Made the backlight power regulator controlled via <&gpio 0 7 0>.

 arch/arm/boot/dts/wm8850-w70v2.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/wm8850-w70v2.dts b/arch/arm/boot/dts/wm8850-w70v2.dts
index fcc660c..25c96d0 100644
--- a/arch/arm/boot/dts/wm8850-w70v2.dts
+++ b/arch/arm/boot/dts/wm8850-w70v2.dts
@@ -37,11 +37,20 @@
 		};
 	};
 
+	backlight_power: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight-power";
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&gpio 0 7 0>;
+	};
+
 	backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 0 50000 1>;	/* duty inverted */
 
 		brightness-levels = <0 40 60 80 100 130 190 255>;
 		default-brightness-level = <5>;
+		power-supply = <&backlight_power>;
 	};
 };
-- 
1.8.1.5




More information about the linux-arm-kernel mailing list