[PATCH] pinctrl: move subsystem mutex to pinctrl_dev struct

Patrice CHOTARD patrice.chotard at st.com
Thu Mar 14 12:59:29 EDT 2013


On 03/13/2013 07:22 PM, Stephen Warren wrote:

> On 03/13/2013 09:44 AM, Linus Walleij wrote:
>> From: Patrice Chotard <patrice.chotard at st.com>
>>
>> This mutex avoids deadlock in case of use of multiple pin
>> controllers. Before this modification, by using a global
>> mutex, deadlock appeared when, for example, a call to
>> pinctrl_pins_show() locked the pinctrl_mutex, called the
>> ops->pin_dbg_show of a particular pin controller. If this
>> pin controller needs I2C access to retrieve configuration
>> information and I2C driver is using pinctrl to drive its
>> pins, a call to pinctrl_select_state() try to lock again
>> pinctrl_mutex which leads to a deadlock.
>>
>> Notice that the mutex grab from the two direction functions
>> was moved into pinctrl_gpio_direction().
>>
>> For two cases, we can't replace pinctrl_mutex by
>> pctldev->mutex, because at this stage, pctldev is
>> not accessible :
>> 	- pinctrl_get()/pinctrl_put()
>> 	- pinctrl_register_maps()
>>
>> So add respectively pinctrl_list_mutex and
>> pinctrl_maps_mutex in order to protect
>> pinctrl_list and pinctrl_maps list instead.
> 
> I can't see how this would be safe, or even how it would solve the
> problem (and still be safe).
> 
> In the scenario described above, pinctrl_pins_show() would need to lock
> the list mutex since it's interacting with the list of pinctrl devices.
> Then, the I2C drivers'c pinctrl_select() also needs to acquire that same
> lock, since it's interacting with another entry in that same list in
> order to re-program the other pinctrl device to route I2C to the correct
> location.
> 

Hi Stephen,

Thanks for your review.

I don't understand why, in pinctrl_pins_show(), pinctrl_list_mutex
should be locked whereas pinctrl_list is not updated or parsed ?

> So, I can't see how separating out the map lock would make any difference.
> 
> Also, why is the map lock relevant here at all anyway? The I2C mux's
> probe() should have executed pinctrl_get(), and isn't the map parsed at
> that time, and converted to a struct pinctrl, and hence any later call
> to pinctrl_select() doesn't touch the map?


Sorry, but i don't follow what you mean ....
In create_pinctrl(), maps is protected by pinctrl_maps_mutex.
I don't understand the link between maps and pinctrl_select(),
pinctrl_select_state_locked() doesn't touch the map.

> 
> Is there a recursive lock type that could be used instead? I'm not sure
> if that'd still be safe though.
> 
> Finally, a long while ago when I removed these separate locks and
> created the single lock, I raised a slew of complex points re: why it
> was extremely hard to split up the locking. I talked about a number of
> AB/BA deadlock cases IIRC mostly w.r.t pinctrl device registration. Were
> those considered when writing this patch? What's the solution?


I suppose you make reference to the comment you put on this commit ?
57b676f9c1b7cd84397fe5a86c9bd2788ac4bd32 : pinctrl: fix and simplify
locking

Added in CC Seraphin Bonnafe as he has reported the deadlock issue using
several pin ctrollers.


More information about the linux-arm-kernel mailing list