[PATCH 0/2] Fix omap serial early crash during hwmod _setup()

[Tony Lindgren]

* Rajendra Nayak <rnayak at ti.com> [130711 03:59]:
> This series should fix the issue with the early serial crash seen
> during hwmod _setup() as reported by [1]
> 
> The issue was reported on a am33xx device and was not seen on omap4
> or omap5 devices as the hwmod data for both omap4 and omap5 had
> statically defined HWMOD_INIT_NO_IDLE and HWMOD_INIT_NO_RESET for
> uart3 which happens to be the debug console used on omap4 panda and
> omap5 uevm boards.

The serial driver should be capable of setting this on it's own
as it sets up the console.

Regards,

Tony