[PATCH v2 1/3] arm: mvebu: Add support for USB host controllers in Armada 370/XP

Jason Cooper jason at lakedaemon.net
Tue Jan 29 14:03:15 EST 2013


On Tue, Jan 29, 2013 at 03:56:20PM -0300, Ezequiel Garcia wrote:
> Hi Jason,
> 
> On Wed, Jan 23, 2013 at 2:40 PM, Jason Cooper <jason at lakedaemon.net> wrote:
> > On Wed, Jan 23, 2013 at 02:06:12PM -0300, Ezequiel Garcia wrote:
> >> Jason,
> >>
> >> On Wed, Jan 23, 2013 at 12:26 PM, Ezequiel Garcia <ezequiel.garcia at free-electrons.com> wrote:
> >> > The Armada 370 and Armada XP SoC has an Orion EHCI USB controller.
> >> > This patch adds support for this controller in Armada 370
> >> > and Armada XP SoC common device tree files.
> >> >
> >> > Cc: Lior Amsalem <alior at marvell.com>
> >> > Cc: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
> >> > Tested-by: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
> >> > Tested-by: Florian Fainelli <florian at openwrt.org>
> >> > Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
> >> > Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
> >> > ---
> >> > Changes from v1:
> >> >  * Remove uneeded USB_ARCH_HAS_EHCI selection as noted by Florian.
> >> >
> >> >  arch/arm/boot/dts/armada-370-xp.dtsi |   15 +++++++++++++++
> >> >  arch/arm/boot/dts/armada-370.dtsi    |    9 +++++++++
> >> >  arch/arm/boot/dts/armada-xp.dtsi     |   17 +++++++++++++++++
> >> >  3 files changed, 41 insertions(+), 0 deletions(-)
> >>
> >> Do you think we're still in time to get this series into v3.9 (given
> >> we decide soon on the OpenBlocks issue)?
> >
> > That shouldn't be a problem.
> >
> 
> Do you think we can take this series for v3.9 as it is?

I'm working though a few other issues first.  I'll take a closer look
when I get up to this series.

> I have no problems making any changes if they are needed
> but I can't move forward with the OpenBlocks issue since
> I don't have access to the hardware.

understood.

> I think we can sanely merge this as it is, since it has been tested in
> every platform.
> If there's anything to change we can do it later, when I have more
> information about the
> OpenBlocks hardware.

As long that that will be clean, there shouldn't be a problem.

thx,

Jason.



More information about the linux-arm-kernel mailing list