[PATCH v4 3/7] ARM: Exynos: add device tree support for MCT controller driver

Mark Rutland mark.rutland at arm.com
Mon Jan 21 08:46:10 EST 2013


On Mon, Jan 21, 2013 at 10:02:18AM +0000, Thomas Abraham wrote:
> Allow the MCT controller base address and interrupts to be obtained from
> device tree and remove unused static definitions of these. The non-dt support
> for Exynos5250 is removed but retained for Exynos4210 based platforms.
> 
> Cc: Changhwan Youn <chaos.youn at samsung.com>
> Signed-off-by: Thomas Abraham <thomas.abraham at linaro.org>
> ---
>  .../bindings/timer/samsung,exynos4210-mct.txt      |   68 ++++++++++++++++++++
>  arch/arm/mach-exynos/include/mach/irqs.h           |    6 --
>  arch/arm/mach-exynos/mct.c                         |   49 +++++++++++----
>  3 files changed, 105 insertions(+), 18 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
> 
> diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
> new file mode 100644
> index 0000000..cb47bfb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
> @@ -0,0 +1,68 @@
> +Samsung's Multi Core Timer (MCT)
> +
> +The Samsung's Multi Core Timer (MCT) module includes two main blocks, the
> +global timer and CPU local timers. The global timer is a 64-bit free running
> +up-counter and can generate 4 interrupts when the counter reaches one of the
> +four preset counter values. The CPU local timers are 32-bit free running
> +down-counters and generate an interrupt when the counter expires. There is
> +one CPU local timer instantiated in MCT for every CPU in the system.
> +
> +Required properties:
> +
> +- compatible: should be "samsung,exynos4210-mct".
> +  (a) "samsung,exynos4210-mct", for mct compatible with Exynos4210 mct.
> +  (b) "samsung,exynos4412-mct", for mct compatible with Exynos4412 mct.
> +
> +- reg: base address of the mct controller and length of the address space
> +  it occupies.
> +
> +- interrupts: the list of interrupts generated by the controller. The following
> +  should be the order of the interrupts specified. The local timer interrupts
> +  should be specified after the four global timer interrupts have been
> +  specified.
> +
> +	0: Global Timer Interrupt 0
> +	1: Global Timer Interrupt 1
> +	2: Global Timer Interrupt 2
> +	3: Global Timer Interrupt 3
> +	4: Local Timer Interrupt 0
> +	5: Local Timer Interrupt 1
> +	6: ..
> +	7: ..
> +	i: Local Timer Interrupt n
> +
> +Example 1: In this example, the system uses only the first global timer
> +	   interrupt generated by MCT and the remaining three global timer
> +	   interrupts are unused. Two local timer interrupts have been
> +	   specified.
> +
> +	mct at 10050000 {
> +		compatible = "samsung,exynos4210-mct";
> +		reg = <0x10050000 0x800>;
> +		interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>,
> +			     <0 42 0>, <0 48 0>;

Rather than padding the interrupts list with nonexistent interrupts, could you
not use something like a #global-interrupts property?

That way you don't have to list fake interrupts, you know exactly how many
global interrupts to expect (so you can sanity-check the list without any
special knowledge of the interrupt controller), and it's easier to support
future revisions which could have more interrupts, in a backwards-compatible
fashion.

> +	};
> +
> +Example 2: In this example, the MCT global and local timer interrupts are
> +	   connected to two seperate interrupt controllers. Hence, an
> +	   interrupt-map is created to map the interrupts to the respective
> +	   interrupt controllers.
> +
> +	mct at 101C0000 {
> +		compatible = "samsung,exynos4210-mct";
> +		reg = <0x101C0000 0x800>;
> +		interrupt-controller;
> +		#interrups-cells = <2>;
> +		interrupt-parent = <&mct_map>;
> +		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
> +			     <4 0>, <5 0>;
> +
> +		mct_map: mct-map {
> +			#interrupt-cells = <2>;
> +			#address-cells = <0>;
> +			#size-cells = <0>;
> +			interrupt-map = <0x0 0 &combiner 23 3>,
> +					<0x4 0 &gic 0 120 0>,
> +					<0x5 0 &gic 0 121 0>;
> +		};
> +	};


[...]

Thanks,
Mark.




More information about the linux-arm-kernel mailing list