[RESEND PATCH v9 0/2] usb: phy: samsung: Introducing usb phy driver for samsung SoCs

Felipe Balbi balbi at ti.com
Fri Jan 18 13:46:19 EST 2013


Hi,

On Fri, Jan 18, 2013 at 02:30:21PM +0530, Praveen Paneri wrote:
> Changes from v8:
> Resending this patch series after rebasing to the latest usb-next branch.
> Rewording inline comments for better readability.
> Removed IS_ENABLED(CONFIG_OF) as pdev->dev.of_node is enough to check for dt support.
> Using of_match_ptr to add of_match_table to platform_driver structure.
> Removed unnecessary variables.
> 
> Changes from v7:
> Rebased to the latest usb-next branch.
> Separating arch patches from these driver patches.
> 
> Changes from v6:
> Modified register definitions according to the existing ones.
> Changed default PHY clk selection for SoCs.
> Improved binding text and rebased to the latest usb-next.
> 
> Changes from v5:
> Moved clk_get() to driver's probe function. Now reference clock frequency
> selection value is stored in samsung_usbphy structure for later use. Used
> IS_ENABLED() instead of #ifdef in samsung_usbphy_get_driver_data().
> 
> Changes from v4:
> Moved header file contents to driver's source file
> Removed unnecessary print message from driver's probe function
> Dropped the Free Software Foundation address from the header
> 
> Changes from v3:
> Replaced susbsys_initcall()/module_exit() by module_platform_driver().
> Accordingly in the hsotg driver returned -EPROBE_DEFER until phy driver
> is registered
> Removed unnecessary devm_usb_put_phy() call from the hsotg driver remove.
> 
> Changes from v2:
> Changed the driver filenames to samsung-usbphy
> Rectified coding style related errors
> 
> Changes from v1:
> Rebased patches to latest usb-next branch
> Changed the name 'sec_usbphy' to 'samsung_usbphy'
> 
> This patch set introduces a phy driver for samsung SoCs. It uses the existing
> transceiver infrastructure to provide phy control functions. Use of this driver
> can be extended for usb host phy as well. Over the period of time all the phy
> related code for most of the samsung SoCs can be integrated here.
> Removing the existing phy code from mach-s3c64xx. Same can be done for other SoCs
> when they start supporting this phy driver. 
> This driver is tested with smdk6410 and Exynos4210(with DT).
> 
> Praveen Paneri (2):
>   usb: phy: samsung: Introducing usb phy driver for hsotg
>   usb: s3c-hsotg: Adding phy driver support

Can you check on my xceiv branch if this is applied correctly ?

thanks

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130118/2bfd8ea3/attachment.sig>


More information about the linux-arm-kernel mailing list