[PATCH 3/7] ARM i.MX6q: Add GPU, VPU, IPU, and OpenVG resets to System Reset Controller (SRC)

Philipp Zabel p.zabel at pengutronix.de
Wed Jan 16 11:13:03 EST 2013


The SRC has auto-deasserting reset bits that control reset lines to
the GPU, VPU, IPU, and OpenVG IP modules. This patch adds a reset
controller that can be controlled by those devices using the
reset controller API.

Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
---
 .../devicetree/bindings/reset/fsl,imx-src.txt      |   49 +++++++++++++
 arch/arm/mach-imx/src.c                            |   72 ++++++++++++++++++++
 include/linux/imx-src.h                            |    6 ++
 3 files changed, 127 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/fsl,imx-src.txt
 create mode 100644 include/linux/imx-src.h

diff --git a/Documentation/devicetree/bindings/reset/fsl,imx-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx-src.txt
new file mode 100644
index 0000000..1330177
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/fsl,imx-src.txt
@@ -0,0 +1,49 @@
+Freescale i.MX System Reset Controller
+======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "fsl,<chip>-src"
+- reg: should be register base and length as documented in the
+  datasheet
+- interrupts: Should contain SRC interrupt and CPU WDOG interrupt,
+  in this order.
+- #reset-cells: 1, see below
+
+example:
+
+src: src at 020d8000 {
+        compatible = "fsl,imx6q-src";
+        reg = <0x020d8000 0x4000>;
+        interrupts = <0 91 0x04 0 96 0x04>;
+        #reset-cells = <1>;
+};
+
+Specifying reset lines connected to IP modules
+==============================================
+
+The system reset controller can be used to reset the GPU, VPU,
+IPU, and OpenVG IP modules on i.MX5 and i.MX6 ICs. Those device
+nodes should specify the reset line on the SRC in their resets
+property, containing a phandle to the SRC device node and a
+RESET_INDEX specifying which module to reset, as described in
+reset.txt
+
+example:
+
+        ipu1: ipu at 02400000 {
+                resets = <&src 2>;
+        };
+        ipu2: ipu at 02800000 {
+                resets = <&src 4>;
+        };
+
+The following RESET_INDEX values are valid for i.MX5:
+GPU_RESET     0
+VPU_RESET     1
+IPU1_RESET    2
+OPEN_VG_RESET 3
+The following additional RESET_INDEX value is valid for i.MX6:
+IPU2_RESET    4
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index e15f155..41687c6 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -15,16 +15,85 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/smp.h>
+#include <linux/reset-controller.h>
 #include <asm/smp_plat.h>
 
 #define SRC_SCR				0x000
 #define SRC_GPR1			0x020
 #define BP_SRC_SCR_WARM_RESET_ENABLE	0
+#define BP_SRC_SCR_SW_GPU_RST		1
+#define BP_SRC_SCR_SW_VPU_RST		2
+#define BP_SRC_SCR_SW_IPU1_RST		3
+#define BP_SRC_SCR_SW_OPEN_VG_RST	4
+#define BP_SRC_SCR_SW_IPU2_RST		12
 #define BP_SRC_SCR_CORE1_RST		14
 #define BP_SRC_SCR_CORE1_ENABLE		22
 
 static void __iomem *src_base;
 
+static int sw_reset_bits[5] = {
+	BP_SRC_SCR_SW_GPU_RST,
+	BP_SRC_SCR_SW_VPU_RST,
+	BP_SRC_SCR_SW_IPU1_RST,
+	BP_SRC_SCR_SW_OPEN_VG_RST,
+	BP_SRC_SCR_SW_IPU2_RST
+};
+
+static int imx_src_reset(unsigned long sw_reset_idx)
+{
+	unsigned long timeout;
+	int bit;
+	u32 val;
+
+	if (!src_base)
+		return -ENODEV;
+
+	if (sw_reset_idx >= ARRAY_SIZE(sw_reset_bits))
+		return -EINVAL;
+
+	bit = 1 << sw_reset_bits[sw_reset_idx];
+
+	val = readl_relaxed(src_base + SRC_SCR);
+	val |= bit;
+	writel_relaxed(val, src_base + SRC_SCR);
+
+	timeout = jiffies + msecs_to_jiffies(1000);
+	while (readl(src_base + SRC_SCR) & bit) {
+		if (time_after(jiffies, timeout))
+			return -ETIME;
+		cpu_relax();
+	}
+
+	return 0;
+}
+
+static int imx_src_is_asserted(unsigned long sw_reset_idx)
+{
+	int bit;
+	u32 val;
+
+	if (!src_base)
+		return -ENODEV;
+
+	if (sw_reset_idx >= ARRAY_SIZE(sw_reset_bits))
+		return -EINVAL;
+
+	bit = 1 << sw_reset_bits[sw_reset_idx];
+
+	val = readl_relaxed(src_base + SRC_SCR);
+
+	return (val & bit) ? 1 : 0;
+}
+
+static struct reset_control_ops imx_src_ops = {
+	.reset = imx_src_reset,
+	.is_asserted = imx_src_is_asserted,
+};
+
+static struct reset_controller_dev imx_reset_controller = {
+	.ops = &imx_src_ops,
+};
+
 void imx_enable_cpu(int cpu, bool enable)
 {
 	u32 mask, val;
@@ -65,6 +134,9 @@ void __init imx_src_init(void)
 	src_base = of_iomap(np, 0);
 	WARN_ON(!src_base);
 
+	imx_reset_controller.of_node = np;
+	reset_controller_register(&imx_reset_controller);
+
 	/*
 	 * force warm reset sources to generate cold reset
 	 * for a more reliable restart
diff --git a/include/linux/imx-src.h b/include/linux/imx-src.h
new file mode 100644
index 0000000..b93ed96
--- /dev/null
+++ b/include/linux/imx-src.h
@@ -0,0 +1,6 @@
+#ifndef __IMX_SRC_H__
+#define __IMX_SRC_H__
+
+extern int imx_src_reset(int sw_reset_idx);
+
+#endif /* __IMX_SRC_H__ */
-- 
1.7.10.4




More information about the linux-arm-kernel mailing list