[RFC] arm: use built-in byte swap function
Kim Phillips
kim.phillips at freescale.com
Tue Feb 19 21:31:15 EST 2013
On Fri, 8 Feb 2013 22:16:47 -0500
Nicolas Pitre <nico at fluxnic.net> wrote:
> On Fri, 8 Feb 2013, Kim Phillips wrote:
>
> > On Fri, 8 Feb 2013 17:47:33 -0500
> > Nicolas Pitre <nico at fluxnic.net> wrote:
> >
> > > On Fri, 8 Feb 2013, Woodhouse, David wrote:
> > >
> > > > On Fri, 2013-02-08 at 15:04 -0500, Nicolas Pitre wrote:
> > > > > On Fri, 8 Feb 2013, Woodhouse, David wrote:
> > > > >
> > > > > > On Thu, 2013-02-07 at 18:13 +0000, Russell King - ARM Linux wrote:
> > > > > > >
> > > > > > > However, the biggest reason not to use libgcc is that we want to control
> > > > > > > what gets used in the kernel - for example, no floating point, and no
> > > > > > > use of 64 x 64bit division.
> > > > > >
> > > > > > Which is all very sensible. But there's no particular reason we couldn't
> > > > > > add a __bswap[sd]i2 to the kernel's version of libgcc if we wanted to.
> > > > >
> > > > > Absolutely.
> > > >
> > > > And then ARM can just set ARCH_USE_BUILTIN_BSWAP like other
> > > > architectures do, right?
> > >
> > > If that turns out to be beneficial over what we have now, then yes.
> > > I didn't read back the whole thread to form an opinion though.
> >
> > The diff below implements __bswap[sd]i2 in arch/arm/lib, and
> > results in the following savings in vmlinux size:
> >
> > column 1: name of defconfig
> > column 2: text+data+bss, linux-next-20130207 vanilla, gcc 4.6.3
> > column 3: text+data+bss, linux-next-20130207+below diff, gcc 4.6.3
> > column 4: col. 3 - col. 2 (ie., -ve numbers represent savings)
> >
> [...]
> > imx_v6_v7_defconfig: 7672373 7667089 -5284
> > lart_defconfig: 2941150 2941054 -96
> > mxs_defconfig: 11091983 11095679 3696
>
> The savings are good, with some impressive cases. However the
> mxs_defconfig is completely the opposite and by far. Any idea?
Unfortunately, I don't seem to be able to reproduce this anymore.
Same linux-next, with three different compilers always produces
smaller binaries:
text data bss dec hex filename
5239363 280576 5569648 11089587 a936b3 linux-next-mxs-orig-gcc4.7/vmlinux
5239169 280556 5569648 11089373 a935dd linux-next-mxs-bswap-gcc4.7/vmlinux
5262223 280592 5569648 11112463 a9900f linux-next-mxs-orig-gcc4.6.3/vmlinux
5261909 280584 5569648 11112141 a98ecd linux-next-mxs-bswap-gcc4.6.3/vmlinux
5241379 280580 5569648 11091607 a93e97 linux-next-mxs-orig-gcc4.6ubuntu/vmlinux
5241189 280600 5569648 11091437 a93ded linux-next-mxs-bswap-gcc4.6ubuntu/vmlinux
So I've since made a more consistent cross-build environment, using
cross tools from Linaro [1,2] instead of via Ubuntu [3].
> > gcc 4.7.3 runs haven't been as good across the board as gcc 4.6.3,
> > however:
>
> Not only that, but in many cases the results are wildly different given
> the same config:
>
> > imx_v6_v7_defconfig: 7637605 7636935 -670
> > lart_defconfig: 2922550 2926600 4050
> > mxs_defconfig: 11071139 11070893 -246
>
> The mxs_defconfig became much better while lart_defconfig regressed a
> lot.
>
> > Haven't looked at why.
>
> Would be a good idea since this is rather weird and gcc could benefit
> from your findings.
The following is next-20130207 built with Linaro gcc 4.7.1 [1], and
before and after the diff at the bottom of this email (and with
normalized linux version string sizes):
lart_defconfig: 2752106 120864 56444 2929414 2cb306 vmlinux
lart_defconfig: 2756092 120864 56444 2933400 2cc298 vmlinux #builtin-bswap
mxs_defconfig: 5229115 280572 5569648 11079335 a90ea7 vmlinux
mxs_defconfig: 5228969 280552 5569648 11079169 a90e01 vmlinux #builtin-bswap
imx_v6_v7_defconfig: 6935025 356172 360648 7651845 74c205 vmlinux
imx_v6_v7_defconfig: 6934091 356180 360648 7650919 74be67 vmlinux #builtin-bswap
so builtin-bswap improved mxs and imx_v6_v7 but in lart, it _added_
3986 bytes to .text -> not good.
Getting a closer look at lart, bloat-o-meter says the code actually
shrunk:
add/remove: 7/1 grow/shrink: 11/19 up/down: 298/-356 (-58)
function old new delta
inet_abc_len - 96 +96
__bswapdi2 - 52 +52
__bswapsi2 - 32 +32
icmp_unreach 472 492 +20
xfrm_selector_match 988 1000 +12
fib_table_insert 2176 2188 +12
__kstrtab___bswapsi2 - 11 +11
__kstrtab___bswapdi2 - 11 +11
__ksymtab___bswapsi2 - 8 +8
__ksymtab___bswapdi2 - 8 +8
vermagic 51 57 +6
linux_banner 230 236 +6
xfrm_replay_check_esn 320 324 +4
xfrm_replay_check_bmp 200 204 +4
xfrm_replay_check 152 156 +4
static.tcp_parse_aligned_timestamp 80 84 +4
fib_table_delete 708 712 +4
cookie_v4_check 1316 1320 +4
tcp_tso_segment 728 724 -4
tcp_options_write 724 720 -4
ip_rt_ioctl 1152 1148 -4
fib_trie_seq_show 724 720 -4
crc32_be 448 444 -4
xfrm_stateonly_find 640 632 -8
tcp_finish_connect 276 268 -8
static.tcp_v4_send_ack 480 472 -8
__xfrm_state_lookup 356 348 -8
__xfrm_state_bump_genids 436 428 -8
__find_acq_core 1256 1248 -8
cookie_v4_init_sequence 272 260 -12
__xfrm_state_insert 616 600 -16
sys_swapon 2500 2480 -20
xfrm_state_find 2420 2396 -24
xfrm_hash_resize 1620 1596 -24
fib_route_seq_show 560 536 -24
fib_table_dump 704 676 -28
devinet_ioctl 1856 1796 -60
static.inet_abc_len 80 - -80
Comparing System.maps, .rodata starts at the same address:
c020a000 R __start_rodata
c020a000 R __start_rodata #builtin-bswap
however, changes including the __bswap[sd]i2 implementation pushes
the .rodata section size just over the 4KiB alignment boundary
specified in arm/kernel/vmlinux.lds:
no builtin_bswap:
c028ffc4 R __stop___modver
c0290000 R __end_rodata
c0290000 R __start___ex_table
with builtin_bswap:
c0290068 R __stop___modver
c0291000 R __end_rodata
c0291000 R __start___ex_table
So, AFAICT, that's why we see a total increase in .text for lart,
and, looking at both numbers being a little less than 4KiB, I
suspect the same with whatever happened with mxs above.
FYI, here are the same platforms with Linaro gcc 4.7.3 [2]:
lart_defconfig: 2745218 120888 56444 2922550 2c9836 vmlinux
lart_defconfig: 2749300 120888 56444 2926632 2ca828 vmlinux #builtin-bswap
mxs_defconfig: 5220919 280572 5569648 11071139 a8eea3 vmlinux
mxs_defconfig: 5220725 280552 5569648 11070925 a8edcd vmlinux #builtin-bswap
imx_v6_v7_defconfig: 6920769 356188 360648 7637605 748a65 vmlinux
imx_v6_v7_defconfig: 6920091 356196 360648 7636935 7487c7 vmlinux #builtin-bswap
so lart is still mostly affected by the .rodata alignment:
add/remove: 7/1 grow/shrink: 11/16 up/down: 330/-308 (22)
function old new delta
inet_abc_len - 96 +96
__bswapdi2 - 52 +52
fib_table_insert 2152 2196 +44
__bswapsi2 - 32 +32
icmp_unreach 472 492 +20
xfrm_selector_match 988 1000 +12
__kstrtab___bswapsi2 - 11 +11
__kstrtab___bswapdi2 - 11 +11
__ksymtab___bswapsi2 - 8 +8
__ksymtab___bswapdi2 - 8 +8
vermagic 51 57 +6
linux_banner 232 238 +6
xfrm_replay_check_esn 320 324 +4
xfrm_replay_check_bmp 200 204 +4
xfrm_replay_check 152 156 +4
static.tcp_parse_aligned_timestamp 80 84 +4
fib_table_delete 708 712 +4
cookie_v4_check 1316 1320 +4
tcp_options_write 724 720 -4
ip_rt_ioctl 1152 1148 -4
fib_trie_seq_show 724 720 -4
crc32_be 448 444 -4
xfrm_stateonly_find 640 632 -8
tcp_finish_connect 276 268 -8
static.tcp_v4_send_ack 480 472 -8
__xfrm_state_lookup 356 348 -8
__xfrm_state_bump_genids 436 428 -8
__find_acq_core 1252 1244 -8
cookie_v4_init_sequence 272 260 -12
__xfrm_state_insert 616 600 -16
xfrm_state_find 2420 2396 -24
xfrm_hash_resize 1620 1596 -24
fib_table_dump 704 676 -28
devinet_ioctl 1856 1796 -60
static.inet_abc_len 80 - -80
> > In any case, some questions I have are:
> >
> > (a) are the __bswap[sd]i2 implementations acceptable written in C,
> > as in the diff? I don't speak ARM asm (yet at least). The
> > generated code looks pretty optimal in both armv5 and 6+.
>
> It looks pretty nice indeed:
>
> __bswapsi2:
> eor r2, r0, r0, ror #16
> mov r1, r2, lsr #8
> bic r3, r1, #65280
> eor r0, r3, r0, ror #8
> bx lr
>
> There is no way to do better than that. But that's true only if -Os is
> _not_ used. With -Os we get the following output:
>
> __bswapsi2:
> mov r3, r0, asl #24
> and r2, r0, #65280
> orr r3, r3, r0, lsr #24
> orr r3, r3, r2, asl #8
> and r0, r0, #16711680
> orr r0, r3, r0, lsr #8
> bx lr
>
> I really don't get why gcc thinks the above is shorter. I'm saving you
> from pasting the __bswapdi2 result which is also way way worse.
> That was with Linaro gcc v4.6.2.
>
> With Sourcery gcc v4.5.1 we get:
>
> __bswapsi2:
> stmfd sp!, {r3, lr}
> bl __bswapsi2
> ldmfd sp!, {r3, pc}
>
> This is indeed shorter, but much less useful. So you better enforce -O2
> for this file. And the nice thing with C code is that it is fully
> optimized with the rev instruction when compiling for ARMv6+ if it is
> ever used in that case.
ok, so to avoid recursion, I've enforced a -O2 on bswapsdi2.o.
> > (c) testing allyesconfigs is proving to be a pain - lots of
> > breakeage - other than defconfig testing, is there any more I can do?
>
> The defconfigs provide wildly different results and that is a good
> thing for further investigation. You may concentrate on a small
> interesting sample such as those I kept above.
>
> With allyesconfig the good configs would cancel out the bad ones making
> the bad ones invisible.
ok, thanks for your comments, Nicolas.
Here's the new diff:
changes from last diff:
- enforce -O2 for bswapsdi2.o
- fix building out-of-source tree
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4265a26..5e8b735 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -58,6 +58,7 @@ config ARM
select CLONE_BACKWARDS
select OLD_SIGSUSPEND3
select OLD_SIGACTION
+ select ARCH_USE_BUILTIN_BSWAP
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index c9865f6..8ef97c4 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -111,12 +111,12 @@ endif
targets := vmlinux vmlinux.lds \
piggy.$(suffix_y) piggy.$(suffix_y).o \
- lib1funcs.o lib1funcs.S ashldi3.o ashldi3.S \
+ lib1funcs.o lib1funcs.S ashldi3.o ashldi3.S bswapsdi2.o \
font.o font.c head.o misc.o $(OBJS)
# Make sure files are removed during clean
extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern \
- lib1funcs.S ashldi3.S $(libfdt) $(libfdt_hdrs)
+ lib1funcs.S ashldi3.S bswapsdi2.o $(libfdt) $(libfdt_hdrs)
ifeq ($(CONFIG_FUNCTION_TRACER),y)
ORIG_CFLAGS := $(KBUILD_CFLAGS)
@@ -158,6 +158,12 @@ ashldi3 = $(obj)/ashldi3.o
$(obj)/ashldi3.S: $(srctree)/arch/$(SRCARCH)/lib/ashldi3.S
$(call cmd,shipped)
+# For __bswapsi2, __bswapdi2
+bswapsdi2 = $(obj)/bswapsdi2.o
+
+$(obj)/bswapsdi2.o: $(obj)/../../../../arch/$(SRCARCH)/lib/bswapsdi2.o
+ $(call cmd,shipped)
+
# We need to prevent any GOTOFF relocs being used with references
# to symbols in the .bss section since we cannot relocate them
# independently from the rest at run time. This can be achieved by
@@ -179,7 +185,8 @@ if [ $(words $(ZRELADDR)) -gt 1 -a "$(CONFIG_AUTO_ZRELADDR)" = "" ]; then \
fi
$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
- $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) FORCE
+ $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) \
+ $(bswapsdi2) FORCE
@$(check_for_multiple_zreladdr)
$(call if_changed,ld)
@$(check_for_bad_syms)
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 60d3b73..ba578f7 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -35,6 +35,8 @@ extern void __ucmpdi2(void);
extern void __udivsi3(void);
extern void __umodsi3(void);
extern void __do_div64(void);
+extern void __bswapsi2(void);
+extern void __bswapdi2(void);
extern void __aeabi_idiv(void);
extern void __aeabi_idivmod(void);
@@ -114,6 +116,8 @@ EXPORT_SYMBOL(__ucmpdi2);
EXPORT_SYMBOL(__udivsi3);
EXPORT_SYMBOL(__umodsi3);
EXPORT_SYMBOL(__do_div64);
+EXPORT_SYMBOL(__bswapsi2);
+EXPORT_SYMBOL(__bswapdi2);
#ifdef CONFIG_AEABI
EXPORT_SYMBOL(__aeabi_idiv);
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index af72969..dbee639 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -13,7 +13,7 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \
ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
ucmpdi2.o lib1funcs.o div64.o \
io-readsb.o io-writesb.o io-readsl.o io-writesl.o \
- call_with_stack.o
+ call_with_stack.o bswapsdi2.o
mmu-y := clear_user.o copy_page.o getuser.o putuser.o
@@ -45,3 +45,5 @@ lib-$(CONFIG_ARCH_SHARK) += io-shark.o
$(obj)/csumpartialcopy.o: $(obj)/csumpartialcopygeneric.S
$(obj)/csumpartialcopyuser.o: $(obj)/csumpartialcopygeneric.S
+
+CFLAGS_bswapsdi2.o = -O2
diff --git a/arch/arm/lib/bswapsdi2.c b/arch/arm/lib/bswapsdi2.c
new file mode 100644
index 0000000..1923b2f
--- /dev/null
+++ b/arch/arm/lib/bswapsdi2.c
@@ -0,0 +1,19 @@
+unsigned int __bswapsi2(unsigned int x)
+{
+ return ((x & 0x000000ffUL) << 24) |
+ ((x & 0x0000ff00UL) << 8) |
+ ((x & 0x00ff0000UL) >> 8) |
+ ((x & 0xff000000UL) >> 24);
+}
+
+unsigned long long __bswapdi2(unsigned long long x)
+{
+ return ((x & 0x00000000000000ffULL) << 56) |
+ ((x & 0x000000000000ff00ULL) << 40) |
+ ((x & 0x0000000000ff0000ULL) << 24) |
+ ((x & 0x00000000ff000000ULL) << 8) |
+ ((x & 0x000000ff00000000ULL) >> 8) |
+ ((x & 0x0000ff0000000000ULL) >> 24) |
+ ((x & 0x00ff000000000000ULL) >> 40) |
+ ((x & 0xff00000000000000ULL) >> 56);
+}
Thanks,
Kim
[1] arm-linux-gnueabihf-gcc (crosstool-NG linaro-1.13.1-2012.06-20120625 - Linaro GCC 2012.06) 4.7.1 20120531 (prerelease)
[2] arm-linux-gnueabihf-gcc (crosstool-NG linaro-1.13.1-4.7-2013.01-20130125 - Linaro GCC 2013.01) 4.7.3 20130102 (prerelease)
[3] gcc version 4.6.3 20120624 (prerelease) (Ubuntu/Linaro 4.6.3-8ubuntu1)
(deb http://mirrors.us.kernel.org/ubuntu/ precise main universe)
More information about the linux-arm-kernel
mailing list