[PATCH v4 04/11] gpio: pxa: remove gpio_type

Haojian Zhuang haojian.zhuang at linaro.org
Tue Feb 19 11:22:21 EST 2013


Since gpio_type is used to check whether gafr register is valid. So
move it into platform data.

Signed-off-by: Haojian Zhuang <haojian.zhuang at linaro.org>
---
 arch/arm/mach-pxa/pxa25x.c |    1 +
 arch/arm/mach-pxa/pxa27x.c |    1 +
 drivers/gpio/gpio-pxa.c    |   54 +++++++++-----------------------------------
 include/linux/gpio-pxa.h   |    1 +
 4 files changed, 14 insertions(+), 43 deletions(-)

diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 9c9c224..ef1bb41 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -343,6 +343,7 @@ static struct pxa_gpio_platform_data pxa25x_gpio_info __initdata = {
 #ifdef CONFIG_CPU_PXA26x
 	.inverted = true,
 #endif
+	.gafr = true,
 	.gpio_set_wake = gpio_set_wake,
 };
 
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 3203a9f..7f1f18a 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -431,6 +431,7 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 }
 
 static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = {
+	.gafr = true,
 	.gpio_set_wake = gpio_set_wake,
 };
 
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index 11a732e..f31509e 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -72,6 +72,7 @@ struct pxa_gpio_chip {
 	struct gpio_chip	gc;
 	void __iomem		*regbase;
 	bool			inverted;
+	bool			gafr;
 	char			label[10];
 
 	unsigned long		irq_mask;
@@ -87,18 +88,8 @@ struct pxa_gpio_chip {
 #endif
 };
 
-enum {
-	PXA25X_GPIO = 0,
-	PXA26X_GPIO,
-	PXA27X_GPIO,
-	PXA3XX_GPIO,
-	PXA93X_GPIO,
-	MMP_GPIO = 0x10,
-};
-
 static DEFINE_SPINLOCK(gpio_lock);
 static struct pxa_gpio_chip *pxa_gpio_chips;
-static int gpio_type;
 static void __iomem *gpio_reg_base;
 
 #define for_each_gpio_chip(i, c)			\
@@ -114,16 +105,6 @@ static inline struct pxa_gpio_chip *gpio_to_pxachip(unsigned gpio)
 	return &pxa_gpio_chips[gpio_to_bank(gpio)];
 }
 
-static inline int gpio_is_pxa_type(int type)
-{
-	return (type & MMP_GPIO) == 0;
-}
-
-static inline int gpio_is_mmp_type(int type)
-{
-	return (type & MMP_GPIO) != 0;
-}
-
 /* GPIO86/87/88/89 on PXA26x have their direction bits in PXA_GPDR(2 inverted,
  * as well as their Alternate Function value being '1' for GPIO in GAFRx.
  */
@@ -149,10 +130,7 @@ static inline int __gpio_is_occupied(struct pxa_gpio_chip *chip, unsigned gpio)
 	base = gpio_chip_base(&chip->gc);
 	gpdr = readl_relaxed(base + GPDR_OFFSET);
 
-	switch (gpio_type) {
-	case PXA25X_GPIO:
-	case PXA26X_GPIO:
-	case PXA27X_GPIO:
+	if (chip->gafr) {
 		gafr = readl_relaxed(base + GAFR_OFFSET);
 		af = (gafr >> ((gpio & 0xf) * 2)) & 0x3;
 		dir = gpdr & GPIO_bit(gpio);
@@ -161,10 +139,8 @@ static inline int __gpio_is_occupied(struct pxa_gpio_chip *chip, unsigned gpio)
 			ret = (af != 1) || (dir == 0);
 		else
 			ret = (af != 0) || (dir != 0);
-		break;
-	default:
+	} else {
 		ret = gpdr & GPIO_bit(gpio);
-		break;
 	}
 	return ret;
 }
@@ -445,30 +421,23 @@ static int pxa_gpio_nums(void)
 	if (cpu_is_pxa25x()) {
 #ifdef CONFIG_CPU_PXA26x
 		count = 89;
-		gpio_type = PXA26X_GPIO;
 #elif defined(CONFIG_PXA25x)
 		count = 84;
-		gpio_type = PXA26X_GPIO;
 #endif /* CONFIG_CPU_PXA26x */
 	} else if (cpu_is_pxa27x()) {
 		count = 120;
-		gpio_type = PXA27X_GPIO;
 	} else if (cpu_is_pxa93x()) {
 		count = 191;
-		gpio_type = PXA93X_GPIO;
 	} else if (cpu_is_pxa3xx()) {
 		count = 127;
-		gpio_type = PXA3XX_GPIO;
 	}
 #endif /* CONFIG_ARCH_PXA */
 
 #ifdef CONFIG_ARCH_MMP
 	if (cpu_is_pxa168() || cpu_is_pxa910()) {
 		count = 127;
-		gpio_type = MMP_GPIO;
 	} else if (cpu_is_mmp2()) {
 		count = 191;
-		gpio_type = MMP_GPIO;
 	}
 #endif /* CONFIG_ARCH_MMP */
 	return count;
@@ -477,7 +446,7 @@ static int pxa_gpio_nums(void)
 #ifdef CONFIG_OF
 static struct of_device_id pxa_gpio_dt_ids[] = {
 	{ .compatible = "mrvl,pxa-gpio" },
-	{ .compatible = "mrvl,mmp-gpio", .data = (void *)MMP_GPIO },
+	{ .compatible = "mrvl,mmp-gpio" },
 	{}
 };
 
@@ -517,7 +486,6 @@ static int pxa_gpio_probe_dt(struct platform_device *pdev)
 		pdata->inverted = true;
 	/* set the platform data */
 	pdev->dev.platform_data = pdata;
-	gpio_type = (int)of_id->data;
 
 	next = of_get_next_child(np, NULL);
 	prev = next;
@@ -563,12 +531,11 @@ static int pxa_gpio_probe(struct platform_device *pdev)
 	if (ret < 0) {
 		pxa_last_gpio = pxa_gpio_nums();
 #ifdef CONFIG_ARCH_PXA
-		if (gpio_is_pxa_type(gpio_type))
-			irq_base = PXA_GPIO_TO_IRQ(0);
-#endif
-#ifdef CONFIG_ARCH_MMP
-		if (gpio_is_mmp_type(gpio_type))
-			irq_base = MMP_GPIO_TO_IRQ(0);
+		irq_base = PXA_GPIO_TO_IRQ(0);
+#elif defined(CONFIG_ARCH_MMP)
+		irq_base = MMP_GPIO_TO_IRQ(0);
+#else
+#error "gpio-pxa driver can't be used for your architecture"
 #endif
 	} else {
 		use_of = 1;
@@ -619,8 +586,9 @@ static int pxa_gpio_probe(struct platform_device *pdev)
 		/* unmask GPIO edge detect for AP side */
 		if (info->ed_mask)
 			writel_relaxed(~0, c->regbase + ED_MASK_OFFSET);
-		/* update for gpio inverted */
+		/* update for gpio inverted & gafr */
 		c->inverted = info->inverted;
+		c->gafr = info->gafr;
 	}
 
 	if (!use_of) {
diff --git a/include/linux/gpio-pxa.h b/include/linux/gpio-pxa.h
index 759e865..a5670c5 100644
--- a/include/linux/gpio-pxa.h
+++ b/include/linux/gpio-pxa.h
@@ -16,6 +16,7 @@ extern int pxa_irq_to_gpio(int irq);
 struct pxa_gpio_platform_data {
 	bool ed_mask;	/* true means that ed_mask reg is available */
 	bool inverted;	/* only valid for PXA26x */
+	bool gafr;	/* only valid for PXA25x/PXA26x/PXA27x */
 	int (*gpio_set_wake)(unsigned int gpio, unsigned int on);
 };
 
-- 
1.7.10.4




More information about the linux-arm-kernel mailing list