[PATCH v5 04/45] percpu_rwlock: Implement the core design of Per-CPU Reader-Writer Locks

Srivatsa S. Bhat srivatsa.bhat at linux.vnet.ibm.com
Sun Feb 10 14:10:56 EST 2013


On 02/09/2013 04:40 AM, Paul E. McKenney wrote:
> On Tue, Jan 22, 2013 at 01:03:53PM +0530, Srivatsa S. Bhat wrote:
>> Using global rwlocks as the backend for per-CPU rwlocks helps us avoid many
>> lock-ordering related problems (unlike per-cpu locks). However, global
>> rwlocks lead to unnecessary cache-line bouncing even when there are no
>> writers present, which can slow down the system needlessly.
>>
[...]
> 
> Looks pretty close!  Some comments interspersed below.  Please either
> fix the code or my confusion, as the case may be.  ;-)
> 

Sure :-)

>> ---
>>
>>  include/linux/percpu-rwlock.h |   10 +++
>>  lib/percpu-rwlock.c           |  128 ++++++++++++++++++++++++++++++++++++++++-
>>  2 files changed, 136 insertions(+), 2 deletions(-)
>>
>> diff --git a/include/linux/percpu-rwlock.h b/include/linux/percpu-rwlock.h
>> index 8dec8fe..6819bb8 100644
>> --- a/include/linux/percpu-rwlock.h
>> +++ b/include/linux/percpu-rwlock.h
>> @@ -68,4 +68,14 @@ extern void percpu_free_rwlock(struct percpu_rwlock *);
>>  	__percpu_init_rwlock(pcpu_rwlock, #pcpu_rwlock, &rwlock_key);	\
>>  })
>>
>> +#define reader_uses_percpu_refcnt(pcpu_rwlock, cpu)			\
>> +		(ACCESS_ONCE(per_cpu(*((pcpu_rwlock)->reader_refcnt), cpu)))
>> +
>> +#define reader_nested_percpu(pcpu_rwlock)				\
>> +			(__this_cpu_read(*((pcpu_rwlock)->reader_refcnt)) > 1)
>> +
>> +#define writer_active(pcpu_rwlock)					\
>> +			(__this_cpu_read(*((pcpu_rwlock)->writer_signal)))
>> +
>>  #endif
>> +
>> diff --git a/lib/percpu-rwlock.c b/lib/percpu-rwlock.c
>> index 80dad93..992da5c 100644
>> --- a/lib/percpu-rwlock.c
>> +++ b/lib/percpu-rwlock.c
>> @@ -64,21 +64,145 @@ void percpu_free_rwlock(struct percpu_rwlock *pcpu_rwlock)
>>
>>  void percpu_read_lock(struct percpu_rwlock *pcpu_rwlock)
>>  {
>> -	read_lock(&pcpu_rwlock->global_rwlock);
>> +	preempt_disable();
>> +
>> +	/* First and foremost, let the writer know that a reader is active */
>> +	this_cpu_inc(*pcpu_rwlock->reader_refcnt);
>> +
>> +	/*
>> +	 * If we are already using per-cpu refcounts, it is not safe to switch
>> +	 * the synchronization scheme. So continue using the refcounts.
>> +	 */
>> +	if (reader_nested_percpu(pcpu_rwlock)) {
>> +		goto out;
>> +	} else {
>> +		/*
>> +		 * The write to 'reader_refcnt' must be visible before we
>> +		 * read 'writer_signal'.
>> +		 */
>> +		smp_mb(); /* Paired with smp_rmb() in sync_reader() */
>> +
>> +		if (likely(!writer_active(pcpu_rwlock))) {
>> +			goto out;
>> +		} else {
>> +			/* Writer is active, so switch to global rwlock. */
>> +			read_lock(&pcpu_rwlock->global_rwlock);
>> +
>> +			/*
>> +			 * We might have raced with a writer going inactive
>> +			 * before we took the read-lock. So re-evaluate whether
>> +			 * we still need to hold the rwlock or if we can switch
>> +			 * back to per-cpu refcounts. (This also helps avoid
>> +			 * heterogeneous nesting of readers).
>> +			 */
>> +			if (writer_active(pcpu_rwlock))
> 
> The above writer_active() can be reordered with the following this_cpu_dec(),
> strange though it might seem.  But this is OK because holding the rwlock
> is conservative.  But might be worth a comment.
> 

Ok..

>> +				this_cpu_dec(*pcpu_rwlock->reader_refcnt);
>> +			else
> 
> In contrast, no reordering can happen here because read_unlock() is
> required to keep the critical section underneath the lock.
>

Ok..
 
>> +				read_unlock(&pcpu_rwlock->global_rwlock);
>> +		}
>> +	}
>> +
>> +out:
>> +	/* Prevent reordering of any subsequent reads */
>> +	smp_rmb();
> 
> This should be smp_mb().  "Readers" really can do writes.  Hence the
> name lglock -- "local/global" rather than "reader/writer".
> 

Ok!

[ We were trying to avoid full memory barriers in get/put_online_cpus_atomic()
in the fastpath, as far as possible... Now it feels like all that discussion
was for nothing :-( ]

>>  }
>>
>>  void percpu_read_unlock(struct percpu_rwlock *pcpu_rwlock)
>>  {
>> -	read_unlock(&pcpu_rwlock->global_rwlock);
> 
> We need an smp_mb() here to keep the critical section ordered before the
> this_cpu_dec() below.  Otherwise, if a writer shows up just after we
> exit the fastpath, that writer is not guaranteed to see the effects of
> our critical section.  Equivalently, the prior read-side critical section
> just might see some of the writer's updates, which could be a bit of
> a surprise to the reader.
> 

Ok, will add it.

>> +	/*
>> +	 * We never allow heterogeneous nesting of readers. So it is trivial
>> +	 * to find out the kind of reader we are, and undo the operation
>> +	 * done by our corresponding percpu_read_lock().
>> +	 */
>> +	if (__this_cpu_read(*pcpu_rwlock->reader_refcnt)) {
>> +		this_cpu_dec(*pcpu_rwlock->reader_refcnt);
>> +		smp_wmb(); /* Paired with smp_rmb() in sync_reader() */
> 
> Given an smp_mb() above, I don't understand the need for this smp_wmb().
> Isn't the idea that if the writer sees ->reader_refcnt decremented to
> zero, it also needs to see the effects of the corresponding reader's
> critical section?
>

Not sure what you meant, but my idea here was that the writer should see
the reader_refcnt falling to zero as soon as possible, to avoid keeping the
writer waiting in a tight loop for longer than necessary.
I might have been a little over-zealous to use lighter memory barriers though,
(given our lengthy discussions in the previous versions to reduce the memory
barrier overheads), so the smp_wmb() used above might be wrong.

So, are you saying that the smp_mb() you indicated above would be enough
to make the writer observe the 1->0 transition of reader_refcnt immediately?
 
> Or am I missing something subtle here?  In any case, if this smp_wmb()
> really is needed, there should be some subsequent write that the writer
> might observe.  From what I can see, there is no subsequent write from
> this reader that the writer cares about.
> 

I thought the smp_wmb() here and the smp_rmb() at the writer would ensure
immediate reflection of the reader state at the writer side... Please correct
me if my understanding is incorrect.

>> +	} else {
>> +		read_unlock(&pcpu_rwlock->global_rwlock);
>> +	}
>> +
>> +	preempt_enable();
>> +}
>> +
>> +static inline void raise_writer_signal(struct percpu_rwlock *pcpu_rwlock,
>> +				       unsigned int cpu)
>> +{
>> +	per_cpu(*pcpu_rwlock->writer_signal, cpu) = true;
>> +}
>> +
>> +static inline void drop_writer_signal(struct percpu_rwlock *pcpu_rwlock,
>> +				      unsigned int cpu)
>> +{
>> +	per_cpu(*pcpu_rwlock->writer_signal, cpu) = false;
>> +}
>> +
>> +static void announce_writer_active(struct percpu_rwlock *pcpu_rwlock)
>> +{
>> +	unsigned int cpu;
>> +
>> +	for_each_online_cpu(cpu)
>> +		raise_writer_signal(pcpu_rwlock, cpu);
>> +
>> +	smp_mb(); /* Paired with smp_rmb() in percpu_read_[un]lock() */
>> +}
>> +
>> +static void announce_writer_inactive(struct percpu_rwlock *pcpu_rwlock)
>> +{
>> +	unsigned int cpu;
>> +
>> +	drop_writer_signal(pcpu_rwlock, smp_processor_id());
> 
> Why do we drop ourselves twice?  More to the point, why is it important to
> drop ourselves first?
> 

I don't see where we are dropping ourselves twice. Note that we are no longer
in the cpu_online_mask, so the 'for' loop below won't include us. So we need
to manually drop ourselves. It doesn't matter whether we drop ourselves first
or later.

>> +
>> +	for_each_online_cpu(cpu)
>> +		drop_writer_signal(pcpu_rwlock, cpu);
>> +
>> +	smp_mb(); /* Paired with smp_rmb() in percpu_read_[un]lock() */
>> +}
>> +
>> +/*
>> + * Wait for the reader to see the writer's signal and switch from percpu
>> + * refcounts to global rwlock.
>> + *
>> + * If the reader is still using percpu refcounts, wait for him to switch.
>> + * Else, we can safely go ahead, because either the reader has already
>> + * switched over, or the next reader that comes along on that CPU will
>> + * notice the writer's signal and will switch over to the rwlock.
>> + */
>> +static inline void sync_reader(struct percpu_rwlock *pcpu_rwlock,
>> +			       unsigned int cpu)
>> +{
>> +	smp_rmb(); /* Paired with smp_[w]mb() in percpu_read_[un]lock() */
> 
> As I understand it, the purpose of this memory barrier is to ensure
> that the stores in drop_writer_signal() happen before the reads from
> ->reader_refcnt in reader_uses_percpu_refcnt(),

No, that was not what I intended. announce_writer_inactive() already does
a full smp_mb() after calling drop_writer_signal().

I put the smp_rmb() here and the smp_wmb() at the reader side (after updates
to the ->reader_refcnt) to reflect the state change of ->reader_refcnt
immediately at the writer, so that the writer doesn't have to keep spinning
unnecessarily still referring to the old (non-zero) value of ->reader_refcnt.
Or perhaps I am confused about how to use memory barriers properly.. :-(

> thus preventing the
> race between a new reader attempting to use the fastpath and this writer
> acquiring the lock.  Unless I am confused, this must be smp_mb() rather
> than smp_rmb().
> 
> Also, why not just have a single smp_mb() at the beginning of
> sync_all_readers() instead of executing one barrier per CPU?

Well, since my intention was to help the writer see the update (->reader_refcnt
dropping to zero) ASAP, I kept the multiple smp_rmb()s.

> 
>> +
>> +	while (reader_uses_percpu_refcnt(pcpu_rwlock, cpu))
>> +		cpu_relax();
>> +}
>> +
>> +static void sync_all_readers(struct percpu_rwlock *pcpu_rwlock)
>> +{
>> +	unsigned int cpu;
>> +
>> +	for_each_online_cpu(cpu)
>> +		sync_reader(pcpu_rwlock, cpu);
>>  }
>>
>>  void percpu_write_lock(struct percpu_rwlock *pcpu_rwlock)
>>  {
>> +	/*
>> +	 * Tell all readers that a writer is becoming active, so that they
>> +	 * start switching over to the global rwlock.
>> +	 */
>> +	announce_writer_active(pcpu_rwlock);
>> +	sync_all_readers(pcpu_rwlock);
>>  	write_lock(&pcpu_rwlock->global_rwlock);
>>  }
>>
>>  void percpu_write_unlock(struct percpu_rwlock *pcpu_rwlock)
>>  {
>> +	/*
>> +	 * Inform all readers that we are done, so that they can switch back
>> +	 * to their per-cpu refcounts. (We don't need to wait for them to
>> +	 * see it).
>> +	 */
>> +	announce_writer_inactive(pcpu_rwlock);
>>  	write_unlock(&pcpu_rwlock->global_rwlock);
>>  }
>>
>>

Thanks a lot for your detailed review and comments! :-)

Regards,
Srivatsa S. Bhat




More information about the linux-arm-kernel mailing list