mx28evk does not boot with linux-next 20130207

[Fabio Estevam]

Hi,

When booting linux-next 20130207 I get no kernel console output on a
mx28evk. After selecting earlyprintk and CONFIG_DEBUG_LL=y support I
get:

  LD      vmlinux
  SORTEX  vmlinux
sort done marker at 514bcc
  SYSMAP  System.map
  OBJCOPY arch/arm/boot/Image
  Kernel: arch/arm/boot/Image is ready
  GZIP    arch/arm/boot/compressed/piggy.gzip
  AS      arch/arm/boot/compressed/debug.o
arch/arm/boot/compressed/debug.S: Assembler messages:
arch/arm/boot/compressed/debug.S:6: Error: garbage following
instruction -- `ldr
r2,=IOMEM((0xf4000000+((((0x80000000+0x074000))&0x80000000)>>7)+((((0x80000000+0x074000))&0x000fffff))))'

Is this a known issue?

Regards,

Fabio Estevam