[PATCH v2] ARM: imx: clk-imx27: Do not register peripheral clock for SSI

[Sascha Hauer]

On Tue, Jan 29, 2013 at 10:17:35AM -0200, Fabio Estevam wrote:
> imx ssi block has two types of clocks:
>     
> - ipg: bus clock, the clock needed for accessing registers.
> - per: peripheral clock, the clock needed for generating the bit rate.
> 
> Currently ssi driver only supports slave mode and thus need only to handle
> the ipg clock, because the peripheral clock comes from the master codec.
> 
> Only register the ipg clock and do not register the peripheral clock for ssi
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>

Applied, thanks

Sascha

> ---
> Changes since v1:
> - Fix typo in email address in the From field
> 
>  arch/arm/mach-imx/clk-imx27.c |    2 --
>  1 file changed, 2 deletions(-)
> 
> diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
> index 1ffe3b534..303d7bd 100644
> --- a/arch/arm/mach-imx/clk-imx27.c
> +++ b/arch/arm/mach-imx/clk-imx27.c
> @@ -274,8 +274,6 @@ int __init mx27_clocks_init(unsigned long fref)
>  	clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL);
>  	clk_register_clkdev(clk[cpu_div], "cpu", NULL);
>  	clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL);
> -	clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0");
> -	clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1");
>  
>  	mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);
>  
> -- 
> 1.7.9.5
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |