[PATCHv2 2/2] arm: dts: omap5-evm: Add mcspi data

Sourav Poddar sourav.poddar at ti.com
Mon Feb 4 03:52:18 EST 2013


Add mcspi node and pinmux data for omap5 mcspi controller.

Tested on omap5430 evm with 3.8-rc4 custom kernel.

Signed-off-by: Sourav Poddar <sourav.poddar at ti.com>
---
v1->v2
Pinctrl nodes were pointing to a different parent.
Fixing the same.
 arch/arm/boot/dts/omap5-evm.dts |   46 +++++++++++++++++++++++++++++++++++++++
 1 files changed, 46 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts
index 8722c15..3625c5c 100644
--- a/arch/arm/boot/dts/omap5-evm.dts
+++ b/arch/arm/boot/dts/omap5-evm.dts
@@ -80,6 +80,33 @@
 			0x15a 0x100	/* abemcbsp2_clkx.abemcbsp2_clkx INPUT | MODE0 */
 		>;
 	};
+
+	mcspi2_pins: pinmux_mcspi2_pins {
+		pinctrl-single,pins = <
+			0xbc 0x100
+			0xbe 0x100
+			0xc0 0x118
+			0xc2 0x0
+		>;
+	};
+
+	mcspi3_pins: pinmux_mcspi3_pins {
+		pinctrl-single,pins = <
+			0x78 0x101
+			0x7a 0x101
+			0x7c 0x101
+			0x7e 0x101
+		>;
+	};
+
+	mcspi4_pins: pinmux_mcspi4_pins {
+		pinctrl-single,pins = <
+			0x164 0x101
+			0x168 0x101
+			0x16a 0x101
+			0x16c 0x101
+		>;
+	};
 };
 
 &mmc1 {
@@ -151,3 +178,22 @@
 	cs1-used;
 	device-handle = <&samsung_K3PE0E000B>;
 };
+
+&mcspi1 {
+
+};
+
+&mcspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi2_pins>;
+};
+
+&mcspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi3_pins>;
+};
+
+&mcspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi4_pins>;
+};
-- 
1.7.1




More information about the linux-arm-kernel mailing list