OMAP display subsystem - does it work?

[Tony Lindgren]

* Tomi Valkeinen <tomi.valkeinen at ti.com> [131222 23:55]:
> On 2013-12-20 18:55, Tony Lindgren wrote:
> > --- a/arch/arm/mach-omap2/board-ldp.c
> > +++ b/arch/arm/mach-omap2/board-ldp.c
> > @@ -248,7 +248,7 @@ static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
> >  	/* Backlight enable GPIO */
> >  	ldp_lcd_pdata.backlight_gpio = gpio + 15;
> >  
> > -	return 0;
> > +	return platform_device_register(&ldp_lcd_device);
> 
> If the panel device registration fails, does the whole TWL probe fail?
> If so, that sounds a bit harsh to me.

OK I've applied the updated version below which does not make the
TWL GPIO probe to fail on errors.
 
> Looks right to me:
> 
> Acked-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
> 
> Rather ugly, though, but there's probably no point in trying to do it in
> a cleaner way (the new GPIO API, I think?), as we'll move to DT soon.

Yes we should not need the callbacks just to set TWL GPIO numbers
when booted with DT so this problem will disappear.

Updated patch below for reference, I kept your ack hope that's OK with
you.

Regards,

Tony

8< --------------------------------
From: Tony Lindgren <tony at atomide.com>
Date: Fri, 27 Dec 2013 09:33:27 -0800
Subject: [PATCH] ARM: OMAP2+: Fix LCD panel backlight regression for LDP legacy booting

Looks like the LCD panel on LDP has been broken quite a while, and
recently got fixed by commit 0b2aa8bed3e1 (gpio: twl4030: Fix regression
for twl gpio output). However, there's still an issue left where the panel
backlight does not come on if the LCD drivers are built into the
kernel.

Fix the issue by registering the DPI LCD panel only after the twl4030
GPIO has probed.

Reported-by: Russell King <rmk+kernel at arm.linux.org.uk>
Acked-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
[tony at atomide.com: updated per Tomi's comments]
Signed-off-by: Tony Lindgren <tony at atomide.com>

--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -242,12 +242,18 @@ static void __init ldp_display_init(void)
 
 static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
 {
+	int res;
+
 	/* LCD enable GPIO */
 	ldp_lcd_pdata.enable_gpio = gpio + 7;
 
 	/* Backlight enable GPIO */
 	ldp_lcd_pdata.backlight_gpio = gpio + 15;
 
+	res = platform_device_register(&ldp_lcd_device);
+	if (res)
+		pr_err("Unable to register LCD: %d\n", res);
+
 	return 0;
 }
 
@@ -346,7 +352,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
 
 static struct platform_device *ldp_devices[] __initdata = {
 	&ldp_gpio_keys_device,
-	&ldp_lcd_device,
 };
 
 #ifdef CONFIG_OMAP_MUX