[PATCH v4 0/5] Renesas R-Car Gen2 Common Clock Framework arch/ support

[Laurent Pinchart]

Hi Simon,

On Saturday 14 December 2013 10:26:24 Simon Horman wrote:
> [ CC Magnus ]
> 
> On Wed, Dec 11, 2013 at 03:05:11PM +0100, Laurent Pinchart wrote:
> > Hello,
> > 
> > This is a repost of the arch patches from the "[PATCH v3 0/8] Renesas
> > R-Car Gen2 Common Clock Framework support" patch series. The first three
> > patches in that series have been reposted separately in the "[PATCH v4
> > 0/3] Renesas R-Car Gen2 Common Clock Framework drivers" series to get
> > merged through Mike Turquette's tree, while this series will go through
> > the ARM SoC tree.
> > 
> > I've asked Mike to provide a stable branch when merging the CCF driver
> > patches.
> > 
> > Laurent Pinchart (5):
> >   ARM: shmobile: r8a7790: Add clock index macros for DT sources
> >   ARM: shmobile: r8a7791: Add clock index macros for DT sources
> >   ARM: shmobile: r8a7790: Add clocks
> >   ARM: shmobile: r8a7790: Reference clocks
> >   ARM: shmobile: r8a7791: Add clocks
> >  
> >  arch/arm/boot/dts/r8a7790.dtsi            | 328 +++++++++++++++++++++++++
> >  arch/arm/boot/dts/r8a7791.dtsi            | 313 +++++++++++++++++++++++++
> >  include/dt-bindings/clock/r8a7790-clock.h | 100 +++++++++
> >  include/dt-bindings/clock/r8a7791-clock.h | 105 ++++++++++
> >  4 files changed, 846 insertions(+)
> >  create mode 100644 include/dt-bindings/clock/r8a7790-clock.h
> >  create mode 100644 include/dt-bindings/clock/r8a7791-clock.h
> 
> Hi Laurent,
> 
> I would like to confirm the dependencies of this series with you.
> As I understand things the dependencies that were not present
> in renesas-devel-v3.13-rc2-20131211 are as follows.
> 
> If any of the patches below can be skipped without breaking this series
> or the followup series "[PATCH v4 00/16] Lager and Koelsch multiplatform
> support" then I am all for not treating them as dependencies at all.
> 
> 
> * [PATCH v4 0/3] Renesas R-Car Gen2 Common Clock Framework drivers
>   Status: Waiting for response from Mike Turquette

The dependency is correct, but the status has changed. Mike has merged the 
patches in his tree in the clk-next-shmobile branch 
(https://git.linaro.org/people/mike.turquette/linux.git/shortlog/refs/heads/clk-next-shmobile).

> * mmc: sh_mobile_sdhi: Convert to clk_prepare/unprepare
>   Status: Merged by Chris Ball. I believe we need a stable branch from him.

You can drop this dependency as the koelsch reference boards lack SDHI support 
and the lager reference board has the SDHI devices disabled.

> * spi: sh-msiof: Convert to clk_prepare/unprepare
>   spi: sh-msiof: Use devm_* managed allocators
>   Status: Merged by Mark Brown. I believe we need a stable branch from him.

You can drop this dependency as the lager and koelsch reference boards lack 
SPI support.

> * usb: gadget: r8a66597-udc: Convert to clk_prepare/unprepare
>   Status: In Felipe Balbi's next branch. It is stable, right?

Correct, but you can drop this dependency as the lager and koelsch reference 
boards lack USB support.

> * clocksource: sh_tmu: Add clk_prepare/unprepare support
>   clocksource: sh_tmu: Release clock when sh_tmu_register() fails
>   clocksource: sh_mtu2: Add clk_prepare/unprepare support
>   clocksource: sh_mtu2: Release clock when sh_mtu2_register() fails
>   Status: Present in v3.13-rc3. No problem!
> 
> * clocksource: sh_cmt: Add clk_prepare/unprepare support
>   Status: I think I have dropped the ball here.
>           Regardless, I think it it needs to be accepted by Daniel Lezcano

That's the only missing one. Do you plan to handle this with Daniel ?

> * serial: sh-sci: Convert to clk_prepare/unprepare
>   serial: sh-sci: Don't enable/disable port from within break timer
>   Status: I have queued these up

-- 
Regards,

Laurent Pinchart