[PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR

Huang Shijie b32955 at freescale.com
Thu Dec 5 02:59:02 EST 2013


On Thu, Dec 05, 2013 at 12:11:01AM -0800, Brian Norris wrote:
> On Thu, Dec 05, 2013 at 03:12:25PM +0800, Huang Shijie wrote:
> > On Wed, Dec 04, 2013 at 10:44:05AM -0800, Brian Norris wrote:
> > > 
> > > I mostly bring this up, though, because it is an example of hardware
> > > that
> > > 
> > >    (a) can operate as a true SPI device (hardware (1) can handle generic
> > >        SPI transfers), but
> > >    (b) requires knowledge of the details of SPI flash in order to get
> > >        optimal usage out of the acceleration from (2).
> > > 
> > > In my book, point (a) and (b) hold some bearing over the question of
> > > "where should this SPI NOR framework live", because it is reasonable
> > > that a single driver for this hardware should be able to handle either
> > > true SPI devices or accelerated SPI-NOR flash.
> > 
> > We have add a @read_id hook for the spi-nor layer, you can use it to read out
> > more info (such as the Device Geometry Definition) for your spi-nor controller driver.
> > 
> > Is it okay?
> 
> I'm not sure which @read_id hook you're talking about, as I've only
> skimmed the most recent thread, and it's not in the last patch series I
> have from you, I don't think. But that is not a response at all to the
> points I brought up. My statements have nothing to do with device
> geometry detection.

My meaning is You can write a new driver for the (b) with the new spi-nor layer,

In the new driver you can implement the @read_id yourself, and read out the
the necessary info, and implement other hooks for the so-called peculiarities.

> 
> What I was actually addressing:
> 
> Your framework aligns with Mark's original suggestion: that the "SPI
> NOR" framework should be a separate layer held entirely within the MTD
> subsystem, and that any given driver is *either* a "SPI NOR" driver *or*
> a "true SPI" driver, not both.
You can only use a SPI-NOR driver, and you can abandon the "true SPI" driver.

Is there some limits that prevent we just code a SPI-NOR driver for your hardware?

thanks
Huang Shijie




More information about the linux-arm-kernel mailing list