[PATCH V2 2/4] clk: exynos-audss: set correct parent clocks

Mike Turquette mturquette at linaro.org
Tue Aug 27 20:43:41 EDT 2013


Quoting Padmavathi Venna (2013-08-16 00:49:36)
> From: Andrew Bresticker <abrestic at chromium.org>
> 
> Different Exynos SoCs have different names for certain input clocks
> to the AudioSS block.  Since the order in which clock providers are
> probed is not guaranteed, we can't use the device-tree to pass the
> correct input clocks.

Why not? Could your audss binding include something like a "clocks"
property with phandles to the input clocks? Then your audss clock driver
could just use clk_get like a regular driver to get the parents.

Regards,
Mike

> Instead, use the compatibility string to
> determine what the correct parent clocks should be.
> 
> Signed-off-by: Andrew Bresticker <abrestic at chromium.org>
> ---
>  drivers/clk/samsung/clk-exynos-audss.c |   12 +++++++++++-
>  1 files changed, 11 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/clk/samsung/clk-exynos-audss.c b/drivers/clk/samsung/clk-exynos-audss.c
> index 86d2606..d81c5f8 100644
> --- a/drivers/clk/samsung/clk-exynos-audss.c
> +++ b/drivers/clk/samsung/clk-exynos-audss.c
> @@ -35,6 +35,7 @@ static unsigned long reg_save[][2] = {
>  /* list of all parent clock list */
>  static const char *mout_audss_p[] = { "fin_pll", "fout_epll" };
>  static const char *mout_i2s_p[] = { "mout_audss", "cdclk0", "sclk_audio0" };
> +static const char *sclk_pcm_p = "sclk_pcm0";
>  
>  #ifdef CONFIG_PM_SLEEP
>  static int exynos_audss_clk_suspend(void)
> @@ -77,6 +78,15 @@ void __init exynos_audss_clk_init(struct device_node *np)
>                 return;
>         }
>  
> +       /* fix up clock parent names based on SoC */
> +       if (of_device_is_compatible(np, "samsung,exynos5420-audss-clock")) {
> +               mout_i2s_p[2] = "sclk_maudio0";
> +               sclk_pcm_p = "sclk_maupcm0";
> +       } else if (of_device_is_compatible(np,
> +                                       "samsung,exynos5250-audss-clock")) {
> +               sclk_pcm_p = "div_pcm0";
> +       }
> +
>         clk_data.clks = clk_table;
>         clk_data.clk_num = EXYNOS_AUDSS_MAX_CLKS;
>         of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
> @@ -118,7 +128,7 @@ void __init exynos_audss_clk_init(struct device_node *np)
>                                 reg_base + ASS_CLK_GATE, 4, 0, &lock);
>  
>         clk_table[EXYNOS_SCLK_PCM] = clk_register_gate(NULL, "sclk_pcm",
> -                               "div_pcm0", CLK_SET_RATE_PARENT,
> +                               sclk_pcm_p, CLK_SET_RATE_PARENT,
>                                 reg_base + ASS_CLK_GATE, 5, 0, &lock);
>  
>         if (of_device_is_compatible(np, "samsung,exynos5420-audss-clock")) {
> -- 
> 1.7.4.4



More information about the linux-arm-kernel mailing list