[PATCH 18/22] ARM: dts: Remove '0x's from OMAP5 DTS file

[Lee Jones]

Tony, Benoit,

Poke

> Cc: Benoît Cousson <b-cousson at ti.com>
> Cc: Tony Lindgren <tony at atomide.com>
> Cc: linux-omap at vger.kernel.org
> Signed-off-by: Lee Jones <lee.jones at linaro.org>
> ---
>  arch/arm/boot/dts/omap5.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> index e643620..be58604 100644
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -604,7 +604,7 @@
>  			ti,hwmods = "wd_timer2";
>  		};
>  
> -		emif1: emif at 0x4c000000 {
> +		emif1: emif at 4c000000 {
>  			compatible	= "ti,emif-4d5";
>  			ti,hwmods	= "emif1";
>  			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
> @@ -615,7 +615,7 @@
>  			hw-caps-temp-alert;
>  		};
>  
> -		emif2: emif at 0x4d000000 {
> +		emif2: emif at 4d000000 {
>  			compatible	= "ti,emif-4d5";
>  			ti,hwmods	= "emif2";
>  			phy-type	= <2>; /* DDR PHY type: Intelli PHY */

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog