[PATCH] ARM: at91/dt: split sam9x5 peripheral definitions
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Thu Aug 8 10:07:22 EDT 2013
On 12:14 Wed 07 Aug , Boris BREZILLON wrote:
> This patch splits the sam9x5 peripheral definitions into:
> - a common base for all sam9x5 SoCs (at91sam9x5.dtsi)
> - several optional peripheral definitions which will be included by specific
> sam9x5 SoCs (at91sam9x5_'periph name'.dtsi)
>
> This provides a better representation of the real hardware (drop unneeded
> dt nodes) and avoids future peripheral id conflict (lcdc and isi both use
> peripheral id 25).
I really don't like this
the mapping is soc specific (here familly) so I does not see any advantage
except move files so NO for me
Best Regards,
J.
>
> Signed-off-by: Boris BREZILLON <b.brezillon at overkiz.com>
> ---
> arch/arm/boot/dts/at91sam9g25.dtsi | 2 +
> arch/arm/boot/dts/at91sam9g35.dtsi | 1 +
> arch/arm/boot/dts/at91sam9x25.dtsi | 24 ++---------
> arch/arm/boot/dts/at91sam9x35.dtsi | 1 +
> arch/arm/boot/dts/at91sam9x5.dtsi | 67 ------------------------------
> arch/arm/boot/dts/at91sam9x5_macb0.dtsi | 56 +++++++++++++++++++++++++
> arch/arm/boot/dts/at91sam9x5_macb1.dtsi | 44 ++++++++++++++++++++
> arch/arm/boot/dts/at91sam9x5_usart3.dtsi | 51 +++++++++++++++++++++++
> 8 files changed, 158 insertions(+), 88 deletions(-)
> create mode 100644 arch/arm/boot/dts/at91sam9x5_macb0.dtsi
> create mode 100644 arch/arm/boot/dts/at91sam9x5_macb1.dtsi
> create mode 100644 arch/arm/boot/dts/at91sam9x5_usart3.dtsi
>
> diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi
> index b4ec6fe..17b8799 100644
> --- a/arch/arm/boot/dts/at91sam9g25.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g25.dtsi
> @@ -7,6 +7,8 @@
> */
>
> #include "at91sam9x5.dtsi"
> +#include "at91sam9x5_usart3.dtsi"
> +#include "at91sam9x5_macb0.dtsi"
>
> / {
> model = "Atmel AT91SAM9G25 SoC";
> diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi
> index bebf9f5..e35c2fc 100644
> --- a/arch/arm/boot/dts/at91sam9g35.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g35.dtsi
> @@ -7,6 +7,7 @@
> */
>
> #include "at91sam9x5.dtsi"
> +#include "at91sam9x5_macb0.dtsi"
>
> / {
> model = "Atmel AT91SAM9G35 SoC";
> diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi
> index 49e94ab..c255421 100644
> --- a/arch/arm/boot/dts/at91sam9x25.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x25.dtsi
> @@ -7,6 +7,9 @@
> */
>
> #include "at91sam9x5.dtsi"
> +#include "at91sam9x5_usart3.dtsi"
> +#include "at91sam9x5_macb0.dtsi"
> +#include "at91sam9x5_macb1.dtsi"
>
> / {
> model = "Atmel AT91SAM9X25 SoC";
> @@ -22,27 +25,6 @@
> 0x80000000 0xfffd0000 0xb83fffff /* pioC */
> 0x003fffff 0x003f8000 0x00000000 /* pioD */
> >;
> -
> - macb1 {
> - pinctrl_macb1_rmii: macb1_rmii-0 {
> - atmel,pins =
> - <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC16 periph B */
> - AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC18 periph B */
> - AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC19 periph B */
> - AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */
> - AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */
> - AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */
> - AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC28 periph B */
> - AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC29 periph B */
> - AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC30 periph B */
> - AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC31 periph B */
> - };
> - };
> - };
> -
> - macb1: ethernet at f8030000 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_macb1_rmii>;
> };
> };
> };
> diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi
> index 1a3d525..8eac66c 100644
> --- a/arch/arm/boot/dts/at91sam9x35.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x35.dtsi
> @@ -7,6 +7,7 @@
> */
>
> #include "at91sam9x5.dtsi"
> +#include "at91sam9x5_macb0.dtsi"
>
> / {
> model = "Atmel AT91SAM9X35 SoC";
> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
> index 57d45f5..05f4c74 100644
> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
> @@ -206,29 +206,6 @@
> };
> };
>
> - usart3 {
> - pinctrl_usart3: usart3-0 {
> - atmel,pins =
> - <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC22 periph B with pullup */
> - AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC23 periph B */
> - };
> -
> - pinctrl_usart3_rts: usart3_rts-0 {
> - atmel,pins =
> - <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */
> - };
> -
> - pinctrl_usart3_cts: usart3_cts-0 {
> - atmel,pins =
> - <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */
> - };
> -
> - pinctrl_usart3_sck: usart3_sck-0 {
> - atmel,pins =
> - <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC26 periph B */
> - };
> - };
> -
> uart0 {
> pinctrl_uart0: uart0-0 {
> atmel,pins =
> @@ -277,34 +254,6 @@
> };
> };
>
> - macb0 {
> - pinctrl_macb0_rmii: macb0_rmii-0 {
> - atmel,pins =
> - <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */
> - AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */
> - AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */
> - AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */
> - AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
> - AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
> - AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
> - AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
> - AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
> - AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
> - };
> -
> - pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
> - atmel,pins =
> - <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A */
> - AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A */
> - AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */
> - AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */
> - AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */
> - AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */
> - AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */
> - AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */
> - };
> - };
> -
> mmc0 {
> pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
> atmel,pins =
> @@ -605,22 +554,6 @@
> status = "disabled";
> };
>
> - macb0: ethernet at f802c000 {
> - compatible = "cdns,at32ap7000-macb", "cdns,macb";
> - reg = <0xf802c000 0x100>;
> - interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_macb0_rmii>;
> - status = "disabled";
> - };
> -
> - macb1: ethernet at f8030000 {
> - compatible = "cdns,at32ap7000-macb", "cdns,macb";
> - reg = <0xf8030000 0x100>;
> - interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
> - status = "disabled";
> - };
> -
> i2c0: i2c at f8010000 {
> compatible = "atmel,at91sam9x5-i2c";
> reg = <0xf8010000 0x100>;
> diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
> new file mode 100644
> index 0000000..55731ff
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
> @@ -0,0 +1,56 @@
> +/*
> + * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
> + * Ethernet interface.
> + *
> + * Copyright (C) 2013 Boris BREZILLON <b.brezillon at overkiz.com>
> + *
> + * Licensed under GPLv2.
> + */
> +
> +#include <dt-bindings/pinctrl/at91.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> + ahb {
> + apb {
> + pinctrl at fffff400 {
> + macb0 {
> + pinctrl_macb0_rmii: macb0_rmii-0 {
> + atmel,pins =
> + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */
> + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */
> + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */
> + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */
> + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
> + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
> + AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
> + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
> + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
> + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
> + };
> +
> + pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
> + atmel,pins =
> + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A */
> + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A */
> + AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */
> + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */
> + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */
> + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */
> + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */
> + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */
> + };
> + };
> + };
> +
> + macb0: ethernet at f802c000 {
> + compatible = "cdns,at32ap7000-macb", "cdns,macb";
> + reg = <0xf802c000 0x100>;
> + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_macb0_rmii>;
> + status = "disabled";
> + };
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
> new file mode 100644
> index 0000000..77425a6
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
> @@ -0,0 +1,44 @@
> +/*
> + * at91sam9x5_macb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 2
> + * Ethernet interfaces.
> + *
> + * Copyright (C) 2013 Boris BREZILLON <b.brezillon at overkiz.com>
> + *
> + * Licensed under GPLv2.
> + */
> +
> +#include <dt-bindings/pinctrl/at91.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> + ahb {
> + apb {
> + pinctrl at fffff400 {
> + macb1 {
> + pinctrl_macb1_rmii: macb1_rmii-0 {
> + atmel,pins =
> + <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC16 periph B */
> + AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC18 periph B */
> + AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC19 periph B */
> + AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */
> + AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */
> + AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */
> + AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC28 periph B */
> + AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC29 periph B */
> + AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC30 periph B */
> + AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC31 periph B */
> + };
> + };
> + };
> +
> + macb1: ethernet at f8030000 {
> + compatible = "cdns,at32ap7000-macb", "cdns,macb";
> + reg = <0xf8030000 0x100>;
> + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_macb1_rmii>;
> + status = "disabled";
> + };
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
> new file mode 100644
> index 0000000..5589579
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
> @@ -0,0 +1,51 @@
> +/*
> + * at91sam9x5_lcdc.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
> + * 4 USART.
> + *
> + * Copyright (C) 2013 Boris BREZILLON <b.brezillon at overkiz.com>
> + *
> + * Licensed under GPLv2.
> + */
> +
> +#include <dt-bindings/pinctrl/at91.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> + ahb {
> + apb {
> + pinctrl at fffff400 {
> + usart3 {
> + pinctrl_usart3: usart3-0 {
> + atmel,pins =
> + <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC22 periph B with pullup */
> + AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC23 periph B */
> + };
> +
> + pinctrl_usart3_rts: usart3_rts-0 {
> + atmel,pins =
> + <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */
> + };
> +
> + pinctrl_usart3_cts: usart3_cts-0 {
> + atmel,pins =
> + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */
> + };
> +
> + pinctrl_usart3_sck: usart3_sck-0 {
> + atmel,pins =
> + <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC26 periph B */
> + };
> + };
> + };
> +
> + usart3: serial at f8028000 {
> + compatible = "atmel,at91sam9260-usart";
> + reg = <0xf8028000 0x200>;
> + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usart3>;
> + status = "disabled";
> + };
> + };
> + };
> +};
> --
> 1.7.9.5
>
More information about the linux-arm-kernel
mailing list